STAUFF PT-RF Series Manual de usuario

Manual

Pressure Transmitter and Reader

of the PT-RF Series

Walter Stauffenberg

GmbH & Co. KG

Im Ehrenfeld 4 D-58791 Werdohl Phone +49 (0) 2392 916-0

Operating instructions PT-RF V1.3 page 2 of 30

Contents

1Safety instructions.................................................................................................................................3

1.1 Intended use.........................................................................................................................................3

1.2 Specialist personnel..............................................................................................................................3

1.3 Accuracy of technical documentation....................................................................................................3

1.4 High-pressure applications....................................................................................................................4

1.5 Service/repairs......................................................................................................................................5

1.6 Information about disposal....................................................................................................................5

2Scope of Supply....................................................................................................................................7

3Reading device Reader-PT-RF .............................................................................................................8

4Pressure transmitter PT-RF...................................................................................................................9

4.1 Installing the pressure transmitters.............................................................................................9

5Carrying out a measurement...............................................................................................................10

5.1 Preparing a measurement........................................................................................................10

5.2 Individual measurement ...........................................................................................................12

5.3 Continuous measurement ........................................................................................................13

6Functions.............................................................................................................................................15

6.1 Storage battery.........................................................................................................................15

6.2 Energy saving function.............................................................................................................15

6.3 Status indicator (LED)..............................................................................................................16

6.4Measurement process..............................................................................................................17

7Software..............................................................................................................................................18

7.1 Installation................................................................................................................................18

7.2 The Interface............................................................................................................................19

7.3 Connecting a reader.................................................................................................................20

7.4 The measurement list...............................................................................................................20

7.5 Function-Buttons......................................................................................................................23

7.6 Set-Buttons ..............................................................................................................................26

7.7 Filter Options............................................................................................................................27

8Maintenance/cleaning/repairs..............................................................................................................28

8.1 Repairs and Service.................................................................................................................28

9Technical Data ....................................................................................................................................29

9.1 Pressure transmitter.................................................................................................................29

9.2 Reading device ........................................................................................................................30

Walter Stauffenberg

GmbH & Co. KG

Im Ehrenfeld 4 D-58791 Werdohl Phone +49 (0) 2392 916-0

Operating instructions PT-RF V1.3 page 3 of 30

1 Safety instructions

1.1 Intended use

This portable reading device is intended for measuring, storing and

monitoring measuring values, e.g. for service and maintenance work as well

as in the field of machine optimisation. The device is only intended for use

with a pressure transmitter and accessories from the STAUFF PT-RF

accessories range. Any other use is not permitted. This can lead to

accidents or destruction of the device and will result in immediate expiration

of any warranty and guarantee claims towards the manufacturer.

Warning

Using the selected product outside the specifications or disregarding the

operating and warning information can result in serious malfunctions that

may cause injuries and property damage.

The device must not be operated in explosive atmosphere!

1.2 Specialist personnel

These operating instructions are intended for trained specialist personnel

who are familiar with the current regulations and standards for the area of

application.

1.3 Accuracy of technical documentation

These operating instructions were created with the greatest care. We accept

no liability for accuracy and completeness of the data, images and drawings.

Subject to change.

Walter Stauffenberg

GmbH & Co. KG

Im Ehrenfeld 4 D-58791 Werdohl Phone +49 (0) 2392 916-0

Operating instructions PT-RF V1.3 page 4 of 30

1.4 High-pressure applications

The overload pressure should not be exceeded when selecting the pressure

transmitters. The pressure transmitter can be damaged if the overload

pressure is exceeded (depending on length/frequency and height of the

pressure spike).

In case of air inclusions, the “diesel effect” can create pressure spikes which

far exceed the overload pressure.

The nominal pressure of the pressure transmitter should therefore be greater

than the nominal pressure in the system to be measured.

Walter Stauffenberg

GmbH & Co. KG

Im Ehrenfeld 4 D-58791 Werdohl Phone +49 (0) 2392 916-0

Operating instructions PT-RF V1.3 page 5 of 30

1.5 Service/repairs

Please contact your sales office for repair of the reading devices.

1.6 Information about disposal

Recycling in line with WEEE

Buying our product means that you have the opportunity to return the device

to the sales office after the end of its life cycle.

The WEEE (EU Directive 2002/96/EC) governs the return and

recycling of old electrical appliances. In the B2B (business to

business) field, as of 13 August 2005 manufacturers of electrical

appliances are obliged to take back and recycle any electrical

appliances sold after this date free of charge. Electrical appliances

must therefore not be introduced into the “normal” waste streams. Electrical

appliances have to be recycled and disposed of separately. All appliances

which are affected by this guidelines are marked with this logo.

What can we do for you?

We therefore want to offer you a cost-neutral option for returning your old

appliance to us. We will then recycle and dispose of your appliance in line

with current legislation.

What do you need to do?

When your appliance has reached the end of its lifetime, simply send it to

your sales office using a courier service (in the box). We will then take on

any recycling and disposal measures. This means you have no costs and no

troubles.

Any questions?

Please contact the sales office if you have any further questions.

Walter Stauffenberg

GmbH & Co. KG

Im Ehrenfeld 4 D-58791 Werdohl Phone +49 (0) 2392 916-0

Operating instructions PT-RF V1.3 page 6 of 30

Information about battery disposal

In the EU, the disposal of batteries is subject to the Battery Directive

2006/66/EU, in Germany to the Battery Act (BattG) dated 25 June 2009 and

internationally to the respective national legislation.

Batteries must never be placed in household waste.

Walter Stauffenberg

GmbH & Co. KG

Im Ehrenfeld 4 D-58791 Werdohl Phone +49 (0) 2392 916-0

Operating instructions PT-RF V1.3 page 7 of 30

2 Scope of Supply

-reading device Reader-PT-RF

-power supply unit 230/110 V 1.2 A

-USB 2.0 cable

-software on CD

-Quick Guide

Walter Stauffenberg

GmbH & Co. KG

Im Ehrenfeld 4 D-58791 Werdohl Phone +49 (0) 2392 916-0

Operating instructions PT-RF V1.3 page 8 of 30

3 Reading device Reader-PT-RF

micro USB connection

measuring key/function key

on/off button

antenna

display

Status display (LED)

Walter Stauffenberg

GmbH & Co. KG

Im Ehrenfeld 4 D-58791 Werdohl Phone +49 (0) 2392 916-0

Operating instructions PT-RF V1.3 page 9 of 30

4 Pressure transmitter PT-RF

4.1 Installing the pressure transmitters

The pressure transmitter has a G1/4 or 1/4NPT process connection,

depending on the version.

The pressure transmitter has to be installed in line with these connections.

Connection using STAUFF Test SDA adaptors can be fitted for direct

connection with test couplings.

It should be ensured that there is sufficient space above the plastic cap to

allow reading out the values with the Reader-PT-RF reading device.

The ambient temperature must not exceed + 85 °C / + 185 °F.

Process connection G1/4 (B04)

Process connection 1/4NPT (N04)

Walter Stauffenberg

GmbH & Co. KG

Im Ehrenfeld 4 D-58791 Werdohl Phone +49 (0) 2392 916-0

Operating instructions PT-RF V1.3 page 10 of 30

5 Carrying out a measurement

5.1 Preparing a measurement

Start the reading device before carrying out a measurement.

To do this, press the key.

The reading device will start with the start screen which displays the

charging state and the available free memory.

Set time and date before using the reading device. This cannot be carried

out on the actual reading device but has to be done through a connection to

a PC. The PT-RF-SOFT software allows setting the time and deleting the

memory there.

It can also be set whether pressure values should be displayed in bar and °C

or in psi and °F.

charging status

charging state

memory used

date

time

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Transmisor de otras marcas

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manual del propietario

Honeywell

Honeywell 5816WMBR Manual de usuario

Kamstrup

Kamstrup READy MTU Instrucciones de funcionamiento

Omega

Omega ZW Series Manual de usuario

ABB

ABB Field 264H Guía

Alinco

Alinco DJ-V17T Manual de usuario

Dejero

Dejero EnGo 3x Manual de usuario

Rosemount

Rosemount 4600 Manual de usuario

Speaka Professional

Speaka Professional 2342740 Manual de usuario

trubomat

trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish

Rondish UT-11 Manual de usuario

MG 10JRE Manual de usuario

Burkert

Burkert 8177 Manual de usuario

Firetide

Firetide HotPort 3203 Manual

Tele Radio

Tele Radio T9-02 Manual de usuario

Rotronic

Rotronic HygroFlex HF3 Series Manual de usuario

Jamara

Jamara FCX6 Pro Tel Manual de usuario