StarTech.com R300WN22GA Manual de usuario
Manual Revision: 09/08/2014
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
R300WN22GAxx
300Mbps Wireless-N Guest WiFi
Access Point / Account Generator -
2T2R 2.4GHz
*actual product may vary from photos
Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void the user’s
authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Instruction Manual
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limit set forth for an
uncontrolled environment. This equipment should be installed and operated with minimum
distance 0.5cm between the radiator and your body.
Déclaration d’exposition à la radiation
Cet équipement respecte les limites d’exposition aux rayonnements IC dénies pour un
environnement non contrôlé. Cet équipement doit être installé et mis en marche à une
distance minimale de 0.5 cm qui sépare l’élément rayonnant de votre corps.
L’émetteur ne doit ni être utilisé avec une autre antenne ou un autre émetteur ni se trouver
à leur proximité.
FCC ID: TWS-GW-1
IC:11232A-R300WN22GA
The Country Code Selection feature is disabled for products marketed in the US/Canada
The device, for operation in the band 5150–5250 MHz is only for indoor use to reduce the
potential for harmful interference to co-channel mobile satellite systems.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual
i
Table of Contents
Introduction............................................................................................1
Packaging Contents ................................................................................................................................. 1
Product Diagram ....................................................................................1
Product Overview ..................................................................................................................................... 1
LED Indicators............................................................................................................................................. 1
Installation ..............................................................................................2
Advanced Setup Menu ..........................................................................6
Management .............................................................................................................................................. 6
Security......................................................................................................................................................... 17
System........................................................................................................................................................... 21
Server............................................................................................................................................................. 26
Guest Setting.............................................................................................................................................. 30
Employee Setting...................................................................................................................................... 42
System Status Menu ..............................................................................43
System Report............................................................................................................................................ 43
Account List ................................................................................................................................................ 44
Account Log................................................................................................................................................ 45
Current User Report ................................................................................................................................. 46
DHCP Clients Report ................................................................................................................................ 46
Session List .................................................................................................................................................. 47
System Tools Menu ................................................................................47
Instruction Manual
ii
Conguration..........................................................................................47
Firmware Upgrade.................................................................................................................................... 48
Boot Code .................................................................................................................................................... 51
System Account......................................................................................................................................... 51
SSL Certicate............................................................................................................................................. 52
PING .............................................................................................................................................................. 52
Restart ........................................................................................................................................................... 53
Logout........................................................................................................................................................... 53
Specications..........................................................................................54
Technical Support ..................................................................................55
Warranty Information............................................................................55
Instruction Manual
1
Introduction
Packaging Contents
• 1 x Guest WiFi Access Point / Account Generator
• 1 x Ethernet Cable
• 2 x Screws for Wall Mounting
• 1 x Power Adapter
• 1 x Quick Start Guide
• 1 x Instruction Manual CD
Product Diagram
Product Overview
LED Indicators
Guest Accont
Generation Button
WAN/ Uplink
Port LAN Ports
Reset Button DC Jack
Instruction Manual
2
LED State Description
PWR O No power
Green Unit powered on
SYS
O Remains o while the unit
is initializing
Green Initialization complete,
system is ready to use
Green (Blinking)
During rmware
upgrades, this system LED
will blink
WAN
O No network connection
Green 10/100Mbps network
connection established
Green (Blinking) Indicates WAN activity
LAN-1-4
O No network connection
Green 10/100Mbps network
connection established
Green (Blinking) Indicates LAN activity
WLAN
O The Wireless is not ready
Green Wireless connection
established
Green (Blinking) Indicates Wireless activity
Installation
1. The Access Point is designed to sit on a at surface (such as a desktop) or be securely
mounted to a wall or similar surface. If you wish to mount the device, rst prepare
the surface by installing mounting screws (not included) otherwise skip to Step 5.
Instruction Manual
3
2. The distance between the two mounting sockets on the back of the Network Switch
is approximately 106mm. Mark the distance on the wall, making sure your marks are
straight and level.
3. Depending on the mounting surface, use the appropriate tools and hardware to
install mounting screws into the surface. There should be a gap of approximately 2
mm between the head of the screw and the wall surface.
4. Place the Access Point so that the wide openings of the mounting sockets are over
the screw heads. Slide the case downward so that the screw heads slide into the
narrow slots.
5. Connect an Ethernet cable from the WAN port on the Access Point (AP) to your ISP
modem (Cable, DSL, etc.).
6. Connect a second Ethernet cable from your computer to one of the LAN ports on
the AP.
7. Connect the power adapter to the DC jack on the AP and wait approximately 30
second for the unit to initialize.
Note: If the message Error: 0001 appears on the LCD screen, the AP did not detect a
connection on the WAN port, please check your cabling.
8. Open your preferred web browser, enter the IP address of the Access Point (Default:
10.59.1.200) into the address box and press Enter.
9. Login to the web GUI with your username / password (Default: admin / admin) and
click Login.
Instruction Manual
4
10. The Setup Wizard will bring you through the basic conguration requirements in
3 sections:
Internet – Allows you to select the appropriate Internet connection type for your
ISP
• DHCP Client – Allows the device to automatically obtain TCP/IP settings from
your ISP Modem.
• Static IP – Manually enter your desired IP address settings.
• PPPoE (Point-to-Point Protocol over Ethernet) – Typically used for ADSL ISPs
that require a username and password to connect
• PPTP Client (Point-to-Point Tunneling Protocol) – Typically used for European
ADSL ISPs that require a username and password to connect.
Instruction Manual
5
Wireless – Allows you to specify basic wireless network settings
• Country – Choose between ETSI (European Telecommunications Standards
Institute) or FCC (Federal Communications Commission – North America).
• Channel – Select the channel ID for wireless connection.
System – Allows you to specify basic system settings for the AP
• Username / Password – Change the default username and password.
NOTE: It is strongly recommended to change the default security settings, to
avoid unwanted access and/or conguration changes. Username and Password
can consist of up to 20 alphanumeric characters and is case sensitive.
Otros manuales para R300WN22GA
1
Tabla de contenidos
Otros manuales de Punto de acceso inalámbrico de StarTech.com
StarTech.com
StarTech.com WAP1011BB Manual
StarTech.com
StarTech.com R300WN22GA Manual de usuario
StarTech.com
StarTech.com AP300WN2X2W Manual de usuario
StarTech.com
StarTech.com WAP1055BG Manual de usuario
StarTech.com
StarTech.com R300WN22OP5G Manual de usuario
StarTech.com
StarTech.com WIFIDETG Manual de usuario
StarTech.com
StarTech.com R300WN22OP5 Manual de usuario
StarTech.com
StarTech.com R300WN22MOD Manual de usuario
StarTech.com
StarTech.com AP150WN1X1OD Manual de usuario
StarTech.com
StarTech.com WFRAP433ACD Manual de usuario
