Star Micronics SLIP SP298 SERIES Manual de usuario

Otros manuales para SLIP SP298 SERIES

2

Tabla de contenidos

Otros manuales de Impresora de Star Micronics

Star Micronics

Star Micronics MP100 Manual

Star Micronics

Star Micronics TSP200 Series Manual de usuario

Star Micronics

Star Micronics NP-255 Instrucciones de instalación

Star Micronics

Star Micronics LaserPrinter4 Manual de usuario

Star Micronics

Star Micronics DP-8340 FM-120 Manual de usuario

Star Micronics

Star Micronics TMP900 Manual de instrucciones de instalación

Star Micronics

Star Micronics Multi-Font LC-IOII Manual de usuario

Star Micronics

Star Micronics SP500 Series Manual del propietario

Star Micronics

Star Micronics WinType 800C Manual de usuario

Star Micronics

Star Micronics NX-1000 Manual de usuario

Star Micronics

Star Micronics TSP654II Instrucciones de uso

Star Micronics

Star Micronics SP317 Manual de usuario

Star Micronics

Star Micronics SJ-144MC Manual de usuario

Star Micronics

Star Micronics TSP700II Series Manual de usuario

Star Micronics

Star Micronics TSP200 Series Manual de usuario

Star Micronics

Star Micronics TCP300II Series Instrucciones de instalación

Star Micronics

Star Micronics BSC10 Series Manual de usuario

Star Micronics

Star Micronics XB-2425 Manual de usuario

Star Micronics

Star Micronics TSP143LAN Manual

Star Micronics

Star Micronics TSP600 Series Manual de operación y mantenimiento

Star Micronics

Star Micronics TSP143IIU Manual de usuario

Star Micronics

Star Micronics NR-10 Manual de usuario

Star Micronics

Star Micronics LC-90 NX-1010 Manual de usuario

Star Micronics

Star Micronics TSP1000 Series Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario

Removing the protective materials

Fourprotectivematerialsareinsertedintotheprintertoprotectcomponentsduring

shipping. Before using the printer, be sure to remove all protective materials as

shown in the illustration.

❏Remove the two pieces of protective tape.

❏Pull the protective sheet straight out toward the front of the printer.

❏Push in the side of the printer cover and lift it upward to remove it.

❏Remove the packing materials.

Note that it is a good idea to keep all protective materials in case you will need to

pack the printer up again and send it somewhere at a later date.

SP298 80871055

Printer cover

Packing

material

Protectivesheet

Protective tape

Protective tape

CAUTION

AutoSide Loading™

This printer is equipped with paper sensors, so you do not have to perform any

special procedure to align the location from which printing should start. Simply

insert the paper into the printer and the sensor locates the top of the paper. The

paper will be moved automatically into position for printing.

❏Make sure that the printer is plugged in and turned on.

❏Check that the RELEASE indicator on the control panel is lit. If the indicator is

not lit, press the RELEASE button until the indicator lights up.

❏Place a piece of the paper onto the printer's document table and slide its right

edge into the printer. Printing will be performed on the side of the paper that is

facing up (the one you can see), starting from the top of the paper.

Important!

•Do not use wrinkled or curled paper. In case of multiple paper, neatly align the

sheets.

•When inserting the paper into the printer, make sure that there are at least 3 cm

between the top edge of the paper and the print start position mark on the printer.

Otherwise the paper sensor may not be able to correctly locate the top of the

paper.

❏Push the right edge of the paper into the printer until it stops. At that time, the

PAPER OUT indicatorwillgoout,andtheprinter mechanism will automatically

align the paper for printing from the top.

❏Send data from your host computer to be printed on the paper.

At least 3cm

Print start position mark