SPL-NXC18D
8
Installation
•Onlyoperatethisproductfromthetypeofpowersourceindicatedonthe
marking label. If you are not sure of the type of power available, consult an
electrician.
•Makesuretheelectricaloutletiseasilyaccessiblefromtheshredder.
•Shreddermustbeoperatedonlyinuprightposition.
•Tomakesuretheshredderhasproperventilation,placeitaminimum
distance of 2 in. (5 cm) from the wall or furniture
Safety Instructions
1. Read and follow all instructions before use. Save these instructions
for later use.
2. Always turn off and unplug the machine before moving, servicing,
cleaning, or anything other than normal operation. Serious injury may
result. Clean shredder with a damp cloth, using a mild soap and
water solution.
3. Do not use abrasives or petroleum-based cleaners.
4. Place this product as close as possible to power source for quick and
easy unplugging.
5. Turn off the power switch before removing waste bin. It is advisable to
disconnect the power cord before opening the shredder.
6. This product should never be placed near a radiator or other heat source.
7. Do not allow anything to rest on the power cord. Do not place the power
cord where people may walk on it.
8. If an extension cord is used with this product, make sure the total ampere
(amps) ratings on the products plugged into the extension cord do not
exceed the extension cord’s ampere rating.
9. Do not attempt to service this product yourself, as opening or removing
covers may expose you to risks of getting injured. Also, doing this will
void the shredder’s warranty.
10. Unplug this product and contact technical support when:
•Thepowercordorplugisdamagedorfrayed.
•Liquidhasbeenspilledontheproduct.
•Theproducthasbeenexposedtorain.
•Theproductdoesnotoperatenormally,evenwhentheoperating
instructions are followed.
•Theproducthasbeendropped,orthecasinghasbeendamaged.
11. This shredder should be operated only with an operator in attendance.
12. Empty the waste bin regularly so that the waste output is not impeded.
13. This machine can shred normal paper, credit cards, CDs and DVDs.
However, you should shred only one type of these items at a time
to avoid causing an overload.
