Standard Horizon Quantum GX5000S Manual de usuario

FCC ID: K6630283X3S

IC ID: 511B-30283X3S

GX5000S / GX5500S Operating Manual

• Waterproof construction

• Independent Channel 70 receiver built-in for continuous DSC watching

• 30 W Loud Hailer with listen back and 4 fog horns, Bells & Whistles

• Capable of connecting 2 optional enhanced CMP25 RAM+ second station remote

microphone or VH-310 Handset

• Intercom between radio and second station microphone

• DSC position request and send functions with compatible STANDARD HORIZON GPS

Chart plotters

• Versatile user-programmable scanning, priority scan and Dual Watch

• One-button access to Channel 16 and 9

• Oversized rotary channel knob, backlit display and keys.

• Navigation information shown on display when optional GPS connected

• Unique Receive Audio Tone Control

TABLE OF CONTENTS

1 GENERAL INFORMATION

2 PACKING LIST

3 OPTIONS

4 SAFETY / WARNING INFORMATION

5 FCC RADIO LICENSE INFORMATION

6 FCC NOTICE

7 GETTING STARTED

7.1 ABOUT VHF RADIO

7.2 SELECTING AN ANTENNA

7.3 COAXIAL CABLE

8 INSTALLATION

8.1 LOCATION

8.2 MOUNTING THE RADIO

8.2.1 Supplied Universal Mounting Bracket

8.2.2 Optional MMB-84 Flush Mount Bracket

8.3 ELECTRICAL CONNECTIONS

8.4 ACCESSORY CABLE

8.5 CHECKING GPS CONNECTIONS

8.6 CHANGING THE GPS TIME

8.7 CHANGING THE TIME LOCATION

8.8 CHANGING COG TO TRUE OR MAGNETIC

8.9 RECEIVER AUDIO TONE CONTROL

8.10 OPTIONAL ENHANCED RAM+ SECOND STATION MIC AND/OR VH-310 HANDSET INSTALLATION

9 CONTROLS AND INDICATORS

10 BASIC OPERATION

10.1 RECEPTION

10.2 TRANSMISSION

10.3 TRANSMIT TIME-OUT TIMER (TOT)

10.4 SIMPLEX / DUPLEX CHANNEL USE

10.5 USA, CANADA, AND INTERNATIONAL MODE

10.6 NOAA WEATHER CHANNELS

10.6.1 NOAA Weather Alert

Vertex Standard Co., Ltd.1

FCC ID: K6630283X3S

IC ID: 511B-30283X3S

GX5000S / GX5500S Operating Manual

10.6.2 NOAA Weather Alert Testing

10.7 EMERGENCY (CHANNEL 16 USE)

10.8 CALLING ANOTHER VESSEL (CHANNEL 16 OR 9)

10.9 MAKING TELEPHONE CALLS

10.10 OPERATING ON CHANNELS 13 AND 67

10.11 DUAL WATCH (TO PRIORITY CHANNEL)

10.12 SCANNING

10.12.1 Selecting the Scan Mode

10.12.2 Memory Scanning (M-SCAN)

10.12.3 Priority Scanning (P-SCAN)

10.13 FOG / PA OPERATION

10.13.1 Operating the PA HAIL mode

10.13.2 Operating the FOG HORN mode

10.14 NAVIGATION INDICATION

10.15 INTERCOM OPERATION

10.15.1 Communication

10.15.2 Calling

10.16 VOICE SCRAMBLER

11 DIGITAL SELECTIVE CALLING

11.1 GENERAL

11.2 MARITIME MOBILE SERVICE IDENTITY (MMSI)

11.2.1 what is an MMSI?

11.2.2 Programming the MMSI

11.3 DSC DISTRESS ALERT

11.3.1 Transmitting a DSC Distress Alert

11.3.2 Receiving a DSC Distress Alert

11.3.3 Distress Relay

11.4 ALL SHIPS CALL

11.4.1 Transmitting an All Ships Call

11.4.2 Receiving an All Ships Call

11.5 INDIVIDUAL CALL

11.5.1 Setting up the Individual / Position Call Directory

11.5.2 Setting up Individual Ringer

11.5.3 Setting up Individual / Group Call Ringer

11.5.4 Transmitting an Individual Call

11.5.5 Receiving an Individual Call

11.6 CALL WAITING DIRECTORY

11.6.1 Enabling the Call Waiting Feature

11.6.2 Reviewing Received Calls Logged into the Call Waiting Directory

11.6.3 To Delete the Received Log From the “DSC Log” Directory

11.7 GROUP CALL

11.7.1 Setting up a Group Call

11.7.2 Transmitting a Group Call

11.7.3 Receiving a Group Call

11.8 POSITION REQUEST

11.8.1 Setting up Position Reply

11.8.2 Transmitting a Position Request to Another Vessel

11.8.3 Receiving a Position Request

11.9 POSITION SEND

11.8.1 Setting up Position Send Ringer

11.8.2 Transmitting a DSC Position Send Call

11.8.3 Receiving a DSC Position Send Call

11.10 DSC TRANSMISSION TEST

11.11 MANUAL INPUTTING GPS LOCATION (LAT/LON)

Vertex Standard Co., Ltd.2

FCC ID: K6630283X3S

IC ID: 511B-30283X3S

GX5000S / GX5500S Operating Manual

12 RADIO SETUP MODE

12.1 LAMP ADJUSTING

12.2 LCD CONTRAST

12.3 TIME OFFSET

12.4 TIME LOCATION

12.5 TRUE MAGNETIC CHANGE (NAV display)

12.6 PRIORITY CHANNEL SET

12.7 SCAN TYPE

12.8 SCAN RESUME TIME

12.9 KEY BEEP (ON/OFF)

12.10 WX ALERT

12.11 VOICE SCRAMBLER

12.12 CHANNEL NAME CHANGE

12.13 NAMING THE RADIO OR SECOND STATION MIC OR HANDSET

12.14 FOG ALERT TONE FREQUENCY

12.15 RECEIVER AUDIO TONE CONTROL

13 ENHANCED RAM+ MIC OPERATION

13.1 RAM+ MIC CONTROLS

13.2 FOG / PA OPERATION

13.2.1 Operating the PA / HAIL mode

13.2.2 Operating the FOG HORN mode

13.3 INTERCOM OPERATION

13.3.1 Communication

13.3.2 Calling

13.4 MANUAL INPUTTING OF THE GPS LOCATION (LAT/LON)

13.5 DSC / RADIO SETUP MODE

13.5.1 Changing GPS Information to Vessel Position or COG

14 VH-310 HANDSET OPERATION

14.1 VH-310 HANDSET CONTROLS

14.2 FOG / PA OPERATION

14.2.1 Operating the PA HAIL mode

14.2.2 Operating the FOG HORN mode

14.3 INTERCOM OPERATION

14.3.1 Communication

14.3.2 Calling

14.4 MANUAL INPUTTING OF THE GPS LOCATION (LAT/LON)

14.5 DSC / RADIO SETUP MODE

14.5.1 Changing GPS Information to Vessel position or COG

14.5.2 External Speaker AF Selection

15 FOG HORN TIMING CHART

16 MAINTENANCE

16.1 REPLACEMENT PARTS

16.2 FACTORY SERVICE

16.3 TROUBLESHOOTING CHART

17 CHANNELASSIGNMENTS

18 SPECIFICATIONS

19 APPENDIX

Vertex Standard Co., Ltd.3

FCC ID: K6630283X3S

IC ID: 511B-30283X3S

GX5000S / GX5500S Operating Manual

1 GENERAL INFORMATION

The Vertex Standard GX5000S/GX5500S are a VHF/FM transceiver designed for use in the

frequency range of 156.025 to 163.275 MHz. The GX5000S/GX5500S can be operated

from 11 to 16 VDC and has a switchable RF output power of 1 watt or 25 watts.

The GX5000S/GX5500S are a Class D DSC (Digital Selective Calling) VHF and includes a

30W PA with preprogrammed fog signals, bells and whistles. 2 connections are available

for the RAM+ or VH-310 second station remote microphones. Class D operation allows

continuous receiving of Digital Selective Calling functions on channel 70 even if the radio is

receiving a call.

2 PACKING LIST

When the package containing the transceiver is first opened, please check it for the

following contents:

GX5000S or GX5500S Transceiver

Mounting Bracket and mounting hardware

Power Cord

Owner’s Manual

Warranty Card

3 OPTIONS

MMB-84 Flush-Mount Bracket

CMP25B/W Remote-Access Microphone (RAM+ Mic, Black/White)

VH-310 Remote Handset (available in Black)

CVS2500 Voice Scrambler

CT-100 7 m Extension Cable for RAM+ Mic/Remote Handset

MLS-310 Amplified External Speaker

MLS-300 External Loudspeaker

220SW 4.5” Round Hail/PA Horn

240SW 5” x 8” Rectangular Hail/PA Horn

Vertex Standard Co., Ltd.4

FCC ID: K6630283X3S

IC ID: 511B-30283X3S

GX5000S / GX5500S Operating Manual

4 SAFETY / WARNING INFORMATION

This radio is restricted to occupational use, work related operations only where the radio

operator must have the knowledge to control the exposure conditions of its passengers and

bystanders by maintaining the minimum separation distance of 0.89 m (2.92 feet).

Failure to observe these restrictions will result in exceeding the FCC RF exposure limits.

Antenna Installation:

The antenna must be located at least 0.89 m (2.92 feet) away from passengers in order to

comply with the FCC RF exposure requirements.

ON-LINE WARRANTY REGISTRATION

Please visit www.standardhorizon.com to register the GX3000S Marine VHF. It should be

noted that visiting the Web site from time to time may be beneficial to you, as new products

are released they will appear on the Marine Division of Vertex Standard Web site.

PRODUCT SUPPORT INQUIRIES

If you have any questions or comments regarding the use of the GX3000S, you can visit

the Marine Division of Vertex Standard Web site to send an E-Mail or contact the Product

Support team at 800-767-2450 M-F 7:00-5:00PST.

Vertex Standard Co., Ltd.5

FCC ID: K6630283X3S

IC ID: 511B-30283X3S

GX5000S / GX5500S Operating Manual

5 FCC RADIO LICENSE INFORMATION

Vertex Standard radios comply with the Federal Communication Commission (FCC)

requirements that regulate the Maritime Radio Service.

STATION LICENSE

An FCC ship station license is no longer required for any vessel traveling in U.S. waters

(except Hawaii) which is under 20 meters in length. However, any vessel required to carry

a marine radio on an international voyage, carrying a HF single side band radiotelephone

or marine satellite terminal is required to have a ship station license. FCC license forms,

including applications for ship (506) and land station licenses can be downloaded via the

Internet at www.fcc.gov/forms. To obtain a form from the FCC, call (888) 225-5322.

RADIO CALL SIGN

Currently the FCC does not require recreational boaters to have a Ship Radio Station

License. The USCG recommends the boats registration number and the state to be used.

CANADIAN SHIP STATION LICENSING

You may need a license when traveling in Canada. If you do need a license contact their

nearest field office or regional office or write:

Industry Canada

Radio Regulatory Branch

Attn: DOSP

300 Slater Street

Ottawa, Ontario

Canada, KIA 0C8

FCC / INDUSTRY CANADA INFORMATION

The following data pertaining to the transceiver is necessary to fill out the license

application.

Type Acceptance ........................................................................... FCC Part 80

Output Power ................................................ 1 Watt (low) and 25 Watts (high)

Emission ..........................................................................16K0G3E, 16K0G2B

Frequency Range...................................................... 156.025 to 163.275 MHz

FCC Type Number .................................................................... K6630283X3S

Industry Canada Type Approval ............................................. 511B-30283X3S

Vertex Standard Co., Ltd.6

FCC ID: K6630283X3S

IC ID: 511B-30283X3S

GX5000S / GX5500S Operating Manual

6 FCC NOTICE

NOTICE

Unauthorized changes or modifications to this equipment may void compliance with FCC

Rules. Any change or modification must be approved in writing by Marine Division of Vertex

Standard.

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Vertex Standard Co., Ltd.7

FCC ID: K6630283X3S

IC ID: 511B-30283X3S

GX5000S / GX5500S Operating Manual

7 GETTING STARTED

7.1 ABOUT VHF RADIO

The radio frequencies used in the VHF marine band lie between 156 and 158 MHz with

some shore stations available between 161 and 163 MHz. The marine VHF band provides

communications over distances that are essentially “line of sight” (VHF signals do not travel

well through objects such as buildings, hills or trees). Actual transmission range depends

much more on antenna type, gain and height than on the power output of the transmitter.

On a fixed mount 25W radio transmission expected distances can be greater than 25 km.

7.2 SELECTING AN ANTENNA

Marine antennas are made to radiate signals equally in all horizontal directions, but not

straight up. The objective of a marine antenna is to enhance the signal toward the horizon.

The degree to which this is accomplished is called the antenna’s gain. It is measured in

decibels (dB) and is one of the major factors in choosing an antenna. In terms of effective

radiated power (ERP), antennas are rated on the basis of how much gain they have over a

theoretical antenna with zero gain. A 1 m, 3dB gain antenna represents twice as much gain

over the imaginary antenna.

Typically a 1 m 3dB gain stainless steel whip is used on a sailboat mast. The longer 2.5 m

6dB fiberglass whip is primarily used on power boats that require the additional gain.

7.3 COAXIAL CABLE

VHF antennas are connected to the transceiver by means of a coaxial cable, a shielded

transmission line. Coaxial cable is specified by it’s diameter and construction.

For runs less than 6 m, RG-58/U, about 6 mm in diameter is a good choice. For runs over 6

m but less than 15 m, the larger RG-8X should be used for cable runs over 15 m RG213

should be used. For installation of the connector onto the coaxial cable refer to the figure

below.

To get your coax cable through a fitting and into your boat’s interior, you may have to cut off

the end plug and reattach it later. You can do this if you follow the directions that are

supplied with the connector. Be sure to make good soldered connections.

8 INSTALLATION

8.1 LOCATION

The radio can be mounted at any angle. Choose a mounting location that:

• keeps the radio and microphone at least 1 m away from your vessel’s magnetic

navigation compass

Vertex Standard Co., Ltd.8

FCC ID: K6630283X3S

IC ID: 511B-30283X3S

GX5000S / GX5500S Operating Manual

• provides accessibility to the front panel controls

• allows connection to a power source and an antenna

• has nearby space for installation of a microphone hanger

• the antenna must be mounted at least 1 m from radio

Note: To insure the radio does not affect the compass or radios performance is not affected

by the antenna location, temporarily connect the radio in the desired location and:

a. Examine the compass to see if the radio causes any deviation

b. Connect the antenna and key the radio. Check to ensure the radio is operating

correctly by requesting a radio check.

8.2 MOUNTING THE RADIO

8.2.1 Supplied Universal Mounting Bracket

The supplied universal mounting bracket allows overhead or desktop mounting.

Use a 5.2-mm (17/64”) bit to drill the holes to a surface which is more 10 mm thick and can

support more than 5 kg and secure the bracket with the supplied screws, spring washers,

flat washers, and nuts.

8.2.2 Optional MMB-84 Flush Mount Bracket

1.To assist in flush mounting, a template has been included. Use this template to

assess the mounting location.

2.Use the template to mark the location where the rectangular hole is to be cut. Confirm

the space behind the dash or panel is deep enough to accommodate the transceiver

(at least 15 cm deep).

There should be at least 1.5 cm between the transceiver’s heatsink and any wiring,

cables or structures.

3.Cut out the rectangular hole and insert the transceiver.

4.Fasten the brackets to the sides of the transceiver with the lock washer nut

combination; so that the mounting screw base faces the mounting surface (see

Figure 2).

5.Turn the adjusting screw to adjust the tension so that the transceiver is tight against

the mounting surface.

8.3 ELECTRICAL CONNECTIONS

CAUTION

Reverse polarity connections will damage the radio!

Connect the power cord and antenna to the radio. Antenna and Power Supply connections

Vertex Standard Co., Ltd.9

FCC ID: K6630283X3S

IC ID: 511B-30283X3S

GX5000S / GX5500S Operating Manual

are as follows:

1.Mount the antenna at least 1 m away from the radio. At the rear of the radio, connect

the antenna cable.

2.Connect the red power wire to a 13.8 VDC ±20% power source. Connect the black

power wire to a negative ground.

3.If an optional remote extension speaker is to be used, refer to next section for

connections.

4.It is advisable to have a Certified Marine Technician check the power output and the

standing wave ratio of the antenna after installation.

8.4 ACCESSORY CABLE

When connecting the external speaker or GPS navigation receiver, strip off about 2.5 cm of

the specified wire’s insulation, then splice the ends together using proper waterproofing

techniques.

• The GPS must have the NMEA Output turned on and set to 4800 Baud in the setup

menu. If there is a selection for parity select none.

• For further information on interfacing /setting up your GPS. Please contact the

manufacturer of the GPS receiver.

• GX5000S/GX5500S can read NMEA-0183 version 2.0 or higher.

• The NMEA supported sentences are:

Input: GLL, GGA, RMC and GNS (RMC sentence is recommended)

Output: DSC and DSE

(DSC sentences to Standard Horizon Plotter for Position Polling)

8.5 CHECKING GPS CONNECTIONS

After connections have been made between the GX5000S/GX5500S and the GPS, a small

satellite icon will appear on the top right corner of the LCD display. To see the additional

GPS information, press and hold the [H/L(NAV)] key. The GX5000S/GX5500S shows the

Date, Time, SOG and COG.

8.6 CHANGING THE GPS TIME

From the Factory the GX5000S/GX5500S shows GPS satellite time or UTC time. A time

offset is needed to show the local time in your area.

1.Press and hold down the [CALL (MENU)] key until “Radio Setup” menu appears.

2.Press the [ENT] key, then select “Time Set” with the CHANNEL selector knob.

3.Press the [ENT] key.

Vertex Standard Co., Ltd.10

Otros manuales para Quantum GX5000S

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Transceptor de Standard Horizon

Standard Horizon

Standard Horizon HX407 Manual de usuario

Standard Horizon

Standard Horizon GX2400GPS Manual de usuario

Standard Horizon

Standard Horizon QUANTUM GX2360S Manual de usuario

Standard Horizon

Standard Horizon MATRIX GX3000S Manual de usuario

Standard Horizon

Standard Horizon Matrix GX2000 Manual de usuario

Standard Horizon

Standard Horizon QUANTUM GX5500S Manual de usuario

Standard Horizon

Standard Horizon HX600S Manual de usuario

Standard Horizon

Standard Horizon HX280S Manual de usuario

Standard Horizon

Standard Horizon HX380 Manual de usuario

Standard Horizon

Standard Horizon Quantum GX5000S Manual de usuario

Standard Horizon

Standard Horizon INTREPID + GX1270S Manual de usuario

Standard Horizon

Standard Horizon GX2400GPS Manual de usuario

Standard Horizon

Standard Horizon PHANTOM PS1000 Manual de usuario

Standard Horizon

Standard Horizon MATRIX GX3000S Manual de usuario

Standard Horizon

Standard Horizon HX370E Manual de usuario

Standard Horizon

Standard Horizon HX100 Manual de usuario

Standard Horizon

Standard Horizon ECLIPSE GX1300E Manual de usuario

Standard Horizon

Standard Horizon HX760S Manual de usuario

Standard Horizon

Standard Horizon MATRIX GX1280S Manual de usuario

Standard Horizon

Standard Horizon Explorer GPS GX1700 Manual de usuario

Standard Horizon

Standard Horizon HX890 Manual de usuario

Standard Horizon

Standard Horizon HX370S Manual de usuario

Standard Horizon

Standard Horizon HX270S Manual de usuario

Standard Horizon

Standard Horizon HX851 Manual de usuario

Manuales populares de Transceptor de otras marcas

Yaesu

Yaesu FT-7B Manual de usuario

Kenwood

Kenwood ProTalk TK-3201 Manual de usuario

Texas Instruments

Texas Instruments TLK10232 Manual de usuario

Mizuho

Mizuho MX-2 Guía del producto

Kenwood

Kenwood TK-3180 Manual de operación y mantenimiento

Blitz

Blitz MJ-398U Manual de usuario

Utilicom

Utilicom LongRanger 2050 Manual de usuario

Standart

Standart HX290UKA Manual de usuario

Altronix

Altronix Pace1PTM Manual de usuario

Kirisun

Kirisun PT2208 Manual de usuario

ELECRAFT

ELECRAFT KX2 Manual de usuario

Zodiac

Zodiac K3 Manual de usuario

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Manual de usuario

Kenwood

Kenwood TK-2217 Manual de usuario

Siemens

Siemens PSO 4000 Manual de usuario

Kenwood

Kenwood TS-590SG Manual de usuario

Midland

Midland G8E-BT Manual

ComNav

ComNav Mariner X2 Manual de usuario