Standard Horizon QUANTUM GX2360S Manual de usuario

Otros manuales para QUANTUM GX2360S

2

Tabla de contenidos

Otros manuales de Transceptor de Standard Horizon

Standard Horizon

Standard Horizon QUANTUM AIS GX6000 Manual de usuario

Standard Horizon

Standard Horizon Quantum GX5000S Manual de usuario

Standard Horizon

Standard Horizon 30143X3D Manual de usuario

Standard Horizon

Standard Horizon Matrix GX2000 Manual de usuario

Standard Horizon

Standard Horizon Explorer GPS GX1700 Manual de usuario

Standard Horizon

Standard Horizon HX270E Manual de usuario

Standard Horizon

Standard Horizon ECLIPSE DSC PLUS GX1150 Manual de usuario

Standard Horizon

Standard Horizon HX280S Manual de usuario

Standard Horizon

Standard Horizon Explorer GX1600 Manual de usuario

Standard Horizon

Standard Horizon HX460S Manual de usuario

Standard Horizon

Standard Horizon QUANTUM GX5500S Manual de usuario

Standard Horizon

Standard Horizon HX300 Manual de usuario

Standard Horizon

Standard Horizon HX280E Manual de usuario

Standard Horizon

Standard Horizon QUANTUM GX6000E Manual de usuario

Standard Horizon

Standard Horizon INTREPID + GX1270S Manual de usuario

Standard Horizon

Standard Horizon HX890E Manual de usuario

Standard Horizon

Standard Horizon EXPLORER GX1700E Manual de usuario

Standard Horizon

Standard Horizon HX870 Manual de usuario

Standard Horizon

Standard Horizon HX851E Manual de usuario

Standard Horizon

Standard Horizon QUANTUM GX2360S Manual

Standard Horizon

Standard Horizon MATRIX AIS/GPS GX2200E Manual de usuario

Standard Horizon

Standard Horizon HX400 Manual de usuario

Standard Horizon

Standard Horizon HX850S Manual de usuario

Standard Horizon

Standard Horizon ECLIPSE GX1300E Manual de usuario

Manuales populares de Transceptor de otras marcas

Yaesu

Yaesu FT-7B Manual de usuario

Kenwood

Kenwood ProTalk TK-3201 Manual de usuario

Texas Instruments

Texas Instruments TLK10232 Manual de usuario

Mizuho

Mizuho MX-2 Guía del producto

Kenwood

Kenwood TK-3180 Manual de operación y mantenimiento

Blitz

Blitz MJ-398U Manual de usuario

Utilicom

Utilicom LongRanger 2050 Manual de usuario

Standart

Standart HX290UKA Manual de usuario

Altronix

Altronix Pace1PTM Manual de usuario

Kirisun

Kirisun PT2208 Manual de usuario

ELECRAFT

ELECRAFT KX2 Manual de usuario

Zodiac

Zodiac K3 Manual de usuario

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Manual de usuario

Kenwood

Kenwood TK-2217 Manual de usuario

Siemens

Siemens PSO 4000 Manual de usuario

Kenwood

Kenwood TS-590SG Manual de usuario

Midland

Midland G8E-BT Manual

ComNav

ComNav Mariner X2 Manual de usuario

QUICK REFERENCE

1)DSC DISTRESS (MMSI must be programmed)

a. LIFT DISTRESS COVER

b. PRESS ROUND DISTRESS KEY

c. PRESS AND HOLD DISTRESS KEY UNTIL ALARM SOUNDS.

2)VOLUME/POWER

a. Press and hold to turn power on or off.

b. Turn to adjust speaker volume when SQL off.

3)SQUELCH

Adjust to the point where random noise stops from the speaker.

Further adjustment will cause a loss in reception of wanted signals.

4)ROTARY CHANNEL KNOB

a. Used to select channels.

b. When in PA mode adjusts PA volume.

5)Channel 16/9

Press once to select CH16. For CH9 press and hold.

6)WX “NOAA WEATHER”

Press [WX]key to select NOAA weather channels.

For weather alert, select channel into scan memory.

7)A/B

a. To program press and hold [A/B]key and turn rotary knob to desired channel,

release [A/B]key. Repeat this procedure for other channel.

b. After step a. is performed, the [A/B]key will select the two programmed channels

and the last selected channel.

8)DW(IC)

a. Select a channel to be dual watched to CH16 and press the [DW]key.

b. When connected to optional RAM mic, press and hold to select the intercom

function between Radio and the RAM mic.

9)H/L(NAV)

a. Switches transmitter power from 1 to 25 watt output.

b. When connected to GPS, press and hold to show the NAV GPS Data, Time,

vessel’s SOG (Speed Over Ground), and COG (Course Over Ground).

10)SCAN

a. Starts and stops scanning on the programmed channels.

b. To show channels in scan memory hold [SCAN]key and turn rotary knob.

11)MEM

a. Add/remove channels into/from memory for scanning, select channel with rotary

knob, then press the [MEM]key. “MEM” will appear on LCD. Press the [MEM]

key again to remove the channel from memory. “MEM” will disappear from LCD.

b. Press and hold to lock out the front panel keys and rotary knob.

Press and hold again to unlock the front panel keys and rotary knob.

12)PA/FOG

a. First press selects PA. Volume is adjusted with rotary knob.

Listen back volume is adjusted with VOL control.

b. Second press selects menu for FOG1 thru FOG4, HORN, SIREN, AGROUND,

and ANCHOR.

13)CALL/SET(MENU)

a. Press to select DSC call functions. Individual Directory and All Ships Call.

b. Press and hold to select Radio Setup Menu or DSC Setup Menu.

14)CLEAR VOICE NOISE CANCELING MIC

Speak 1 inch away from the hole in the top front of mic.

QUANTUM