ST STEVAL-IDB007V1 Manual de usuario

July 2016

DocID029565 Rev 1

1/12

www.st.com

UM2094

User manual

STEVAL-IDB007V1 evaluation board quick start guide

Introduction

The STEVAL-IDB007V1 is an evaluation board based on BlueNRG-1, a low power Bluetooth®Smart

System on Chip that is compliant with the Bluetooth®v4.1 specification and supports both master and

slave roles.

Figure 1: STEVAL-IDB007V1 Bluetooth® low energy evaluation board

Contents

UM2094

2/12

DocID029565 Rev 1

Contents

1Getting started.................................................................................5

1.1 Powering up STEVAL-IDB007V1 evaluation board running the

sensor profile firmware (peripheral role).........................................................5

1.2 Install the BlueNRG app for smartphones (central role)....................6

1.3 Run BlueNRG app for smartphones..................................................6

2SW demonstration applications.....................................................8

3References.......................................................................................9

4List of acronyms............................................................................10

5Revision history ............................................................................11

UM2094

List of tables

DocID029565 Rev 1

3/12

List of tables

Table 1: Reference information ..................................................................................................................9

Table 2: List of acronyms used in the document......................................................................................10

Table 3: Document revision history ..........................................................................................................11

List of figures

UM2094

4/12

DocID029565 Rev 1

List of figures

Figure 1: STEVAL-IDB007V1 Bluetooth® low energy evaluation board....................................................1

Figure 2: STEVAL-IDB007V1 power options..............................................................................................6

Figure 3: Smartphone BlueNRG SensorApp acceleration notification.......................................................7

Figure 4: Smartphone BlueNRG SensorApp RSSI notifications ................................................................7

UM2094

Getting started

DocID029565 Rev 1

5/12

1 Getting started

The evaluation board is preprogrammed with sensor profile firmware

(BLE_SensorDemo.hex) which allows to set and establish a connection with a smartphone

(iOS or Android) running a BlueNRG sensor application which works with the sensor profile

firmware running on the STEVAL-IDB007V1 evaluation board.

The sensor profile firmware implements a proprietary Bluetooth profile which exposes two

services: acceleration and environmental service.

The acceleration service contains the following characteristics:

Acceleration: it gives the current value of the acceleration detected by the MEMS

sensor on the STEVAL-IDB007V1 board.

Free fall characteristic: it allows detection of free-fall condition by the LSM6DS3

MEMS sensor on the STEVAL-IDB007V1 board (the condition is detected if the

acceleration on the 3 axes is near zero for a certain amount of time).

The environmental service contains characteristics that expose data from some

environmental sensors, such as temperature sensors.

1.1 Powering up STEVAL-IDB007V1 evaluation board running

the sensor profile firmware (peripheral role)

Two power options are available:

Batteries - To power the STEVAL-IDB007V1 evaluation board using batteries, 2 AAA

batteries must be inserted into the battery holder at the rear of the board, and jumper

JP1 set to position 2-3 and jumper JP2 set to position 1-2 (Figure 2: "STEVAL-

IDB007V1 power options").

USB - To power the STEVAL-IDB007V1 evaluation board through USB, jumper JP1

must be in position 1-2 and jumper JP2 set to position 2-3 (Figure 2: "STEVAL-

IDB007V1 power options" ). Connect a USB cable to the micro-USB connector (Figure

2: "STEVAL-IDB007V1 power options") and to a PC USB port.

Once powered, the STEVAL-IDB007V1 sensor profile firmware starts advertising, waiting

for a smartphone to connect to it.

Getting started

UM2094

6/12

DocID029565 Rev 1

Figure 2: STEVAL-IDB007V1 power options

1.2 Install the BlueNRG app for smartphones (central role)

Two versions (Android and iOS) of the smartphone sensor application are available for

download on the specific web pages (Table 1: "Reference information"Android & iOS

SensorApp).

Install the smartphone SensorApp application on the selected smartphone.

1.3 Run BlueNRG app for smartphones

Launch the BlueNRG SensorApp application on the smartphone

It starts scanning for the BlueNRG sensor peripheral. A device called “BlueNRG”

appears on the screen (this is the STEVAL-IDB007V1 running the sensor profile

firmware)

Tap on the BlueNRG name to connect to the STEVAL-IDB007V1 running the sensor

profile firmware. The BlueNRG SensorApp application enables notifications on the

acceleration characteristic and displays the received value on the screen.

UM2094

Getting started

DocID029565 Rev 1

7/12

Figure 3: Smartphone BlueNRG SensorApp acceleration notification

Data from environmental sensors are also periodically read and displayed.

Figure 4: Smartphone BlueNRG SensorApp RSSI notifications

SW demonstration applications

UM2094

8/12

DocID029565 Rev 1

2 SW demonstration applications

In order to develop a software application for the STEVAL-IDB007V1 evaluation

board, it is recommended to start with the reference demonstration applications

provided within the BlueNRG-1 DK software package (STSW-BLUENRG1-DK)

available on the STEVAL-IDB007V1 web page.

Unzip the file, launch the related installer and follow installation steps (the default

installation path is C:\\Program Files (x86)\\STMicroelectronics\\BlueNRG-1 DK x.x.x)

Wait for the package installation to complete.

The Projects folder in BlueNRG-1 DK SW package contains the available BlueNRG-1

demonstration applications, IAR projects, sources and header files.

IAR Embedded Workbench for ARM (EWARM) tool is needed for building and

downloading software applications running on the BlueNRG-1 microcontroller.

For a description of the available BlueNRG-1 demonstration applications and

supported platforms, refer to BlueNRG-1 development kits user manual available

on the related web page. The BLE_SensorDemo.hex prebuilt binary image is also

provided within the BlueNRG-1 DK software package, in the Firmware folder.

Keil MDK-ARM and Atollic TrueStudio for ARM (GCC) toolchains projects are also

available.

UM2094

References

DocID029565 Rev 1

9/12

3 References

Table 1: Reference information

What

Where

Description

BlueNRG-1 Bluetooth

Low Energy wireless

System on Chip

www.st.com/bluenrg-1

BlueNRG-1 device web

page

Bluetooth Low Energy

Specification

https://www.bluetooth.org/en-

us/specification/adopted-specifications

Bluetooth Low Energy

specification web page

Smartphone Android 4.3

Sensor App

https://play.google.com/store/apps/detai

ls?id=com.st.blunrg

Android 4.3 BlueNRG

Sensor App web page

Smartphone IoS Sensor

App

https://itunes.apple.com/us/app/bluenrg/

id705873549?l=it&ls=1&mt=8

IoS BlueNRG Sensor App

web page

STSW-BLUENRG1-DK

STEVAL-IDB007V1 web page, Tools

and Software section

BlueNRG-1 DK SW

package with reference

demonstration applications

STEVAL-IDB007V1

www.st.com/bluenrg-1, Evaluation

Tools section

STEVAL-IDB007V1

platform web page

List of acronyms

UM2094

10/12

DocID029565 Rev 1

4 List of acronyms

Table 2: List of acronyms used in the document

Term

Meaning

BLE

Bluetooth Low Energy

Development kit

Software

USB

Universal serial bus

Tabla de contenidos

Otros manuales de Placa madre de ST

ST STM3210B-EVAL Manual de usuario

ST EVAL-L9177A Manual de usuario

ST PractiSPIN UM0696 Manual de usuario

ST SPC560P-DISP Manual de usuario

ST EVALKITSTKNX Manual de usuario

ST STM32F407 Series Manual de usuario

ST X-NUCLEO-S2868A1 Manual de usuario

ST STM32L4R9I Manual de usuario

ST EVALSTGAP2S Manual de usuario

ST SPC584B-DISP Manual de usuario

ST UM0920 Manual de usuario

ST STSW-STUSB002 Manual de usuario

ST MB1367 Manual de usuario

ST SPC560D-DIS Manual de usuario

ST User Manual Manual de usuario

ST STM32100B-EVAL Manual de usuario

ST STM32G4 Nucleo-32 Manual de usuario

ST STFPC311 Manual de usuario

ST EVAL-FDA903U-SA Manual de usuario

ST STM32U5 Manual de usuario

ST STM32L4R9I-EVAL Manual de usuario

ST SPC58XXADPT144S REV.B Manual de usuario

ST STM3210E-EVAL Manual de usuario

ST STLINK-V3SET Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario