SRT SRT334i Manual de usuario
www.srt.se
Quickstart guide SRT334i
SRT3340100A06_QG_EN_STD
Turn on/off
Before attempting to turn the
device on, make sure it is con-
nected to a power outlet. Then
press and hold the On/Off
button for at least 5 seconds
until all three status LEDs start
ashing.
To turn off the device press
and hold the On/Off button
until all status LEDs turn off.
Battery status
Power statusTag vicinity indicator
On/Off button
www.srt.se
Status LEDs Status LEDs
Tag vicinity indicator LED
Solid
The device is not within the
transmission range of
another tag.
Blinking
The device is within the
transmission range of
another tag.
No light
The device is turned off.
Battery status LED
Solid
The battery is charged.
Blinking
The battery level is low.
No light
The device is turned off.
Power status LED
Solid
Power is connected.
Blinking
The device is not receiving
power.
No light
The device is turned off.
Otros manuales de GPS de SRT
