SRM X-Power Manual de usuario
EN
V1.1
TABLE OF CONTENT
INTRODUCTION .................................................................................. 3
PACKAGE CONTENT .......................................................................... 3
SAFETY / WARNINGS......................................................................... 4
WARRANTY.......................................................................................... 5
TECHNICAL DATA................................................................................ 5
INSTALLATION OF X-POWER............................................................ 6
PEDAL INSTALLATION .................................................................... 7
CHARGING THE PEDALS ............................................................... 8
X-POWER APP DOWNLOAD........................................................... 9
INSTALLATION OF X-POWER PEDALS......................................... 10
USING X-POWER ................................................................................ 12
OTHER APP FEATURES.................................................................. 13
POWERMETER PAIRING ................................................................ 14
BINDING AND CLEAT....................................................................... 15
ENGAGING AND RELEASING THE CLEATS ................................ 16
MAINTENANCE................................................................................. 17
TROUBLESHOOTING / FAQ............................................................... 18
DECLARATION OF CONFORMITY.................................................... 19
CONTACT US ....................................................................................... 20
3
INTRODUCTION
PACKAGE CONTENT
• SRM X-Power pedal pair (SPD compatible)
• SPD compatible cleats incl. screws
• 3m USB-A to micro USB-B cable
• Charge adapter X-Power to Micro USB-B
• Quick start guide incl. safety instructions and warranty information
Congratulations, you are now the owner of SRM X-Power PowerMeter pedals!
This manual provides instructions on features, important safety information and how to set
up and use your X-Power pedals.
How does the X-Power pedal work? Each pedal measures the force applied and the
cadence in real-time then calculates the torque and power, sending it to your bike computer.
X-Power pedals are ANT+™and Bluetooth®4.0 or higher compatible. With its rechargeable
battery, double seal technology and an integrated robust design it is made for many years of
use. Please follow each step carefully in this manual! Enjoy the ride with X-Power!
4
SAFETY / WARNINGS
I WARNING - TO AVOID SERIOUS INJURIES
Be sure to follow the instructions provided in this user manual when installing the product. The X-Power pedals are
designed so that you release them only when you intend to release. They are not designed to release automatically at
times such as when falling o the bicycle. If you have any doubt when installing the X-Power pedals, we recommend that
you seek assistance from an authorized retailer or refer to the support page on www.srm.de. Incorrect installation of the
X-Power pedals may result in damage not covered by product warranty, serious injury or death. Please familiarize yourself
with your new pedals before riding on the road. Practice engaging and disengaging, rst at a standstill and then while
riding in a safe location.
Weight limit: X-Power pedals are designed and optimized for use by cyclists up to 120 kg (265 lbs).
Classication for bicycle usage according to international standard ASTM F2043-13 for the X-Power
pedal is rated category 3: This is a set of conditions for operation of a bicycle that includes Condition 1
and Condition 2 as well as rough trails, rough unpaved roads, and rough terrain and unimproved trails
that require technical skills. Jumps and drops are intended to be less than 61cm (24”). For more info
and explanations on all bicycle usage conditions visit our webpage www.srm.de.
ICAUTION - DANGER FOR ELECTRONIC EQUIPMENT
Sensitive electronic instruments and devices may change calibration or be damaged by the magnetic eld of
the charge adapter that includes two strong NdFeB magnets. Keep the adapter away from magnetic storage
media i.e. credit or memory cards, etc. as well as from electronic equipment such as computers, laptops, digital
cameras and mobile phones.
5
WARRANTY
SRM X-Power PowerMeter pedals are warrantied to be free from defects in materials or workmanship for three years from
the date of purchase. Within this period, SRM will, at its option, repair or replace any components that fail in normal use.
Such repairs or replacement will be made at no charge to the original owner/customer for parts or labour, provided that
the customer shall be responsible for any necessary transportation cost. Any damage to the pedals that is not considered
normal wear and tare, is not covered by warranty.
Further information and exceptions for which the guarantee does not apply can be found at www.srm.de/support/warranty/
Additionally, SRM reserves the right to refuse warranty claims against products or services that it deems fraudulent. The
SRM PowerMeter is dened as: shaft, pedal-body, rechargeable battery, internal electronics, seals, covers.
TECHNICAL DATA
POWER MEASURING ACCURACY ± 2%
IP PROTECTION IP 67
BATTERY TYPE 70mAh rechargeable Lithium Polymer battery
VOLTAGE 3.7 V DC / 5V DC Charging
BATTERY RUN TIME Up to 35 hours of riding time
OPERATING TEMPERATURE -20 / +60°C (-4 / 140°F)
CHARGING TEMPERATURE +10 / +45°C (50 / 113°F)
WIRELESS FREQUENCY PROTOCOL ANT+™2.4GHz @ 4dbm nominal
Bluetooth®2.4GHz @ 4dbm nominal
WEIGHT 345g per Pair (not including cleats)
6
INSTALLATION OF X-POWER
Setting up X-Power pedals is quick and easy. Follow the installation steps outlined below and fully charge both pedals
as described on page 8. Install the X-Power app on your cell phone and follow the installation process inside the app
properly.
I IMPORTANT
It is essential to perform the installation process with the X-Power App any time the pedals are removed, installed or
tightened, otherwise the data may not be displayed correctly.
7
PEDAL INSTALLATION
Apply grease to the pedal threads.
Use a 15 mm open end wrench (width
>6 mm) to install the pedals into your
crankset. Recommended min. torque
30Nm (22 lbf-ft). The pedal sides are
clearly marked with R and L.
I NOTE
Do not use a cone wrench as it might
damage the charging port.
Right pedal - right hand thread
Left pedal - left hand thread
I NOTE
Pedal clearance to the chain and
frame should be greater than two
millimetres.
>2 mm
8
CHARGING THE PEDALS
To charge the X-Power pedals attach the
magnetic charge adapter to a USB wall charger
(not included) with the enclosed USB cable.
Connect the adapter onto the charge port on
the pedal shaft. A blinking red LED indicates
that the pedal is charging. Once the pedal is
fully charged the LED will blink green. A full
charge cycle takes approximately three hours.
INOTE
When charging the pedals the internal
electronics goes in standby automatically. To
re-activate the pedal remove the charger and
turn the pedal.
A blinking yellow LED indicates cadence for the
rst couple pedal revolutions. If the cadence
LED is blinking red the pedal battery is low and
should be recharged!
INOTE
Using crank boots on your crank can cover
the charge port and make charging impossible
when mounted. Add pedal spacers or remove
the boot if necessary.
USB Micro-B cable
Magnetic charge adapter
Charge port one side only
Status LED
9
X-POWER APP DOWNLOAD
To congure and calibrate the pedals
download the X-Power application (iOS
and Android), enable Bluetooth®on the
phone and spin both pedals to turn them
on. You can then follow the on-screen
instructions to connect to the app.
I IMPORTANT
For correct operation you must follow the
installation steps on page 10-11.
10
INSTALLATION OF X-POWER PEDALS
Step 1:
Open the X-Power App and
search for your pedals. Make
sure both pedals are turned
on and Bluetooth®is enabled.
Step 2:
Select the pedal shown!
INOTE
Only the right pedal will be shown!
The left pedal connects automatically
as soon as a connection has been
established on the right side.
Step 4:
... and follow the instructions in the
Installation Wizard carefully.
If no left pedal was found you can
search and select the left pedal in the
next screen. Make sure the left pedal
is charged and turned on.
Step 3:
The Status screen will show
all needed information such
as battery level. If you don’t
see a left pedal here, proceed
with the initial installation.
Choose the Installation
tab now...
Tabla de contenidos
Otros manuales de Accesorios para bicicletas de SRM
Manuales populares de Accesorios para bicicletas de otras marcas
Sigma
Sigma BC 16.16 Manual de usuario
Playcore
Playcore Dero Setbacks Manual de usuario
VDO Cyclecomputing
VDO Cyclecomputing x3dw Manual de usuario
Cateye
Cateye RAPID X2 Manual de usuario
buratti meccanica
buratti meccanica Clorofilla Trail Manual de usuario
Shimano
Shimano SG-8R20 Instrucciones de funcionamiento
