Spypoint LINK-S Manual de usuario
QUICK START GUIDE
v.1.5
LINK-S
LINK-S-V (US ONLY)
ENGLISH
2
In the box
Note: Memory card and batteries are sold separately.
1x Camera
1x Mounting bracket
1x Installation strap
1x Quick start guide
1x 12V-USB cable
1x Micro SIM card is preactivated and inserted in the camera
User manual, latest rmware & FAQ available at:
support.spypoint.com
Components
Battery case &
Micro SIM card slot
Slot for installation strap
Locking latch
Cable lock hole
12V jack
Microphone
Tripod mount
Battery door push button
Antenna
Solar pannel
LEDs
Photo lens
Light sensor
Viewing screen
Detection lens
Test light
Navigation buttons
ON / OFF Switch
SD card slot
1
2
3
4
5
6
7
8
9
10
12
13
15
16
11
17
18
19
14
Steel security boxes may reduce the
wireless functionalities of the product.
ENGLISH
3
13
14
15
16
18
19
12
17
3
4
6
7
1
2
5
8
9
10
11
ENGLISH
4
REMOVE THE CAMERA FROM THE MOUNTING BRACKET
• Push the tab to release the camera from the mounting bracket.
• Remove the camera.
CHARGING THE INTERNAL BATTERY
Charge the camera for 24-48 hours before use. While charging,
make sure the camera is turned o and the solar panel is facing
down so it does not interfere with the USB charging process.
Plug the 12V-USB cable from the 12V port at the bottom of the
camera and connect it to a USB port. Once plugged, the screen will
turn on and it will show the charging battery level for 10 seconds.
Press the OK button once more to see the battery level reappear.
FINDING THE SIM ID
The SIM ID number can be found in the battery case. You will need
this number to complete the registration of the LINK-S camera and
connect to the application.
Getting started
ENGLISH
5
INSERT THE MEMORY CARD
Insert an SD/SDHC memory card (up to 32 GB capacity) in the card
slot with the label side facing upward. The card is inserted correctly
when a click is heard. Always ensure that the camera power is OFF
before inserting an SD card.
We suggest to format your SD card if it’s been in another
electronic device.
PRO TIPS:
Solar panel & internal rechargeable battery
● You need at least 50% of the solar panel cleared for
maximum performance.
● If the power of the internal battery becomes insucient, the
camera will shut down. Once the battery has been charged
suciently by the solar panel, the camera will automatically turn
on leaving the settings untouched.
● An optional power source can be added as a backup to the
internal rechargeable battery for safety.
ENGLISH
6
GETTING STARTED
INSTALL THE FREE SPYPOINT APP
The SPYPOINT App lets you connect and control your
camera remotely using a smartphone or tablet. Features
include viewing your camera status, pictures, full camera
control and more.
Install the free App
1. Make sure you have a data package with either your smartphone
or tablet or a Wi connection.
2. To install the App, you can either:
● Get it on Google PlayTM (Google Play is a trademark of Google Inc)
● Download on the App StoreTM (App Store is a trademarks of Apple Inc.)
3. Search for the SPYPOINT App from SPYPOINT.
4. Install the App on your smartphone or tablet.
Run the SPYPOINT APP
Start the App and it will guide you through a few questions. You
will then receive an email conrming the activation of your camera.
Just follow the prompts in the App.
Note: If you don’t have a smartphone or a tablet, please contact
our customer service to activate your camera.
Call us at our toll free number: 1-888-779-7646
ENGLISH
7
SETTING THE APP
The SPYPOINT App let you congure all the camera’s settings.The-
ses new settings will take eect the next time the LINKcamera con-
nects to update it’s status. Here are the most important settings,
there is more are available in the app.
BASIC SETTINGS
Mode - PHOTO
Delay: Sets the time interval between each detection before
the camera records the next photo.
Multi-shot: Takes up to 2 consecutive shots at each detection, with
a 5 second delay between each photo.
Mode - TIME LAPSE
Interval: This option allows the camera to take photos at regular
preset intervals without detection.
Mode - VIDEO
Delay: Sets the time interval between each detection before
the camera records the next video.
Photo rst: When this option is enabled, a photo is taken
immediately before each video.
Video length: Allows the user to select the duration of the recording.
TRANSFER SETTINGS
First transfer time: Allows the user to choose at what time of
the day the camera communicates for the
rst time.
Transfer frequency: Allows the user to choose the number of
synchronizations that the camera performs
daily.
ENGLISH
8
ADVANCED OPTIONS
Night mode: Allows the user to set the best option for photos.
Schedule: Allows the user to set the period of operation of the
camera for each day of the week. The start and stop
time are the hours during which the camera is in
action and can record pictures or videos. For an
activation of 24 hours, the same start and stop time
must enter 00h00 or 12 AM.
illumination modes comparison* (Night modes)
* Available for photos only
optimal
MODE
IR-boost
MODE
blur reduction
MODE
Blur reduction
Battery life
Flash range
ENGLISH
9
START THE CAMERA
We suggest to format your SD card if it’s been in another
electronic device.
Turn On the camera and let it do the network search as it can take a
few minutes. Once the network search will be completed, you’ll see
the signal strength appear. If you have no signal, move outside or get
near a window and restart the camera a few times if need be to get all
the information from the cell network.
Note that the signal bars on a LINK-S might not be equal to your
other cellular devices as there’s no industry standard and practice to
label dBm values to a specic number of bars.
Click on Start Camera and select the desired operating mode (pho-
to, time lapse or video) in the Mode menu by pressing OK. If you
start the camera in Video mode, make sure that you have enabled
the Photo First setting.
When the mode is selected, the test light in front of the camera
will ash for 30 seconds to allow the user to leave the area without
being photographed or recorded.
The camera has now updated it’s status in the LINK app with it’s
latest informations. The camera is now ready to take pictures and
transmit them to your LINK app upon the next synch. Synchs are set
by default to every 4 hours from midnight.
(Conguration)
Photo
(Conguration)
Time lapse
(Conguration)
Vidéo
4G MODE
Start Camera
Detection test
View
Settings
Photo
Time lapse
Video
ENGLISH
10
INSTALLATION OF THE CAMERA
Install the camera with or without the mounting bracket
Recommended installation height
The camera should be installed at the same height as the animal’s
mid-body.
Ideal installation for quality pictures & videos
The targeted animal should be 25 feet / 7.5m away from the camera
for a better eld of view.
To get brighter pictures at night , you should have elements in the
background to reect back the IR ash to the camera.
Important
Before the end of the free 30-day trial
Subscribe to a service plan in the App to benet from SPYPOINT
EXPERIENCE lease note that if you choose not to subscribe to a
plan, you will still be able to receive up to 100 photos per month
with a photo history of the last 7 days with our FREE monthly
plan.
www.spypoint.com/plans
THIS DEVICE COMPLIES WITH PART 15
OF THE FCC RULES.
Operation is subject to the following two conditions:
(1)
this device may not cause harmful interference,
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
Otros manuales para LINK-S
2
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
Otros manuales de Cámara digital de Spypoint
Spypoint
Spypoint IR-B Manual de usuario
Spypoint
Spypoint LINK-MICRO-S-LTE Manual de usuario
Spypoint
Spypoint FLEX Manual de usuario
Spypoint
Spypoint LIVE Manual de usuario
Spypoint
Spypoint XCEL HD Manual de usuario
Spypoint
Spypoint TINY-3 Manual de usuario
Spypoint
Spypoint LINK-MICRO-LTE Manual de usuario
Spypoint
Spypoint LINK-MICRO-S-LTE Manual de usuario
Spypoint
Spypoint LINK-DARK Manual de usuario
Spypoint
Spypoint FL-A Manual de usuario
