SPT CL-510 Manual de usuario
SUNPENTOWN
Your Guarantee
If this product is found to be faulty as a result of faulty materials or workmanship
within one year from date of purchase, it will be repaired free of charge.
This guarantee is subject to the following terms:
• Sunpentown must be notified of the fault.
• Proof of purchase must be presented to Sunpentown’s nominated
representative.
• The warranty will be void if the product if modified, misused or repaired
by an unauthorized person.
• The warranty after repair will not be extended beyond the original one-
year period.
• All replacement parts will be new or reconditioned.
• Parts, which are replaced, become the property of Sunpentown.
• The warranty applies for the use of the product in the USA only.
What is NOT COVERED:
• Warranty does not include freight charges.
• Incidental or consequential damage caused by possible defects with this
product.
• Damage to product caused by improper power supply voltage, accident,
fire, floods or acts of nature.
• Failure of product resulting from unauthorized modifications to the
product.
• Improper installation or failure to perform the necessary maintenance.
This GUARANTEE is in addition to your Statutory Rights
SUNPENTOWN INTERNATIONAL INC.
21415 Baker Parkway, City of Industry, CA 91789-5236
909-468-5288 Fax: 909-468-5279
service@sunpentown.com
www.sunpentown.com
STAINLESS STEEL
BLENDER
MODEL: CL-510
Durable Stainless Steel Body and Glass Jug
INSTRUCTION MANUAL
……………Parts & Contents…………
1. Measuring Cup
2. Lid
3. 48 oz. Glass Jar
4. Sealing Ring
5. Cutting Blade
6. Cup Base
7. Motor Base
8. Toggle Switch
9. Jar Assembly
10. Manual Pulse Button
….Important Safeguards….
When using electrical appliances, basic safety precautions should always be
followed, including the following:
1. Read all instructions before operating.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electrical shock, do not immerse cord, plug or appliance
itself in water or other liquids.
4. Close supervision is necessary when appliance is used by or near children.
5. Unplug from outlet when not in use and before cleaning. Allow to cool
before putting on or taking off parts.
6. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions or has been damaged in any manner. Return the
appliance to the manufacture for examination, repair or adjustment.
7. The use of accessory attachments not recommended by the appliance
manufacturer may cause injuries.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Always attach plug to appliance first, then plug cord into wall outlet. To
disconnect, turn controls to OFF position, then remove plug from wall outlet.
12. Oversized foods or metal utensils must not be inserted in the appliance as
they may cause a fire or risk of electrical shock.
13. A fire may occur if the appliance is covered or touching flammable material
including curtains, draperies, walls and the like when in operation.
14. Do not clean with metal scouring pads. Pieces can break off the pad and
touch electrical parts, involving a risk of electrical shock.
15. Extreme caution should be exercised when using containers constructed of
other material other than metal or glass.
16. Do not store any materials other than manufacturers recommended
accessories in this unit when not in use.
17. Do not place any of the following materials inside the unit: Paper, cardboard,
plastic and the like.
SAVE THESE INTRUCTIONS
THIS PRODUCT IS FOR HOUSEHOLD USE ONLY!
10
1 2
Before first use
…………………………………….
All parts of the blender are to be thoroughly cleaned before using for the first
time. (refer to Section: Cleaning).
Take out the required length of cable from the cable tidy on the base of the
blender and connect the device to the mains supply.
Assembling the Glass Jar:
1. Put the rubber sealing ring (4) on the inner edge of the blade unit (5).
2. Put the blade unit with sealing ring into the cup base (6).
3. Insert the assembled Cup Base onto the bottom of the glass jar and secure
tightly.
4. Mount the glass cup (3) onto the base unit (7). Tune the cup base unit and turn
clockwise until glass jar locks into place.
5. Mount the Measure Cup (1) onto the Lid (2).
6. Secure the Lid onto Glass Jar and press down.
Inserting the Glass Jar:
1. Make sure that the blender is switched off (Switch in the ‘0’ setting).
2. Place the jar assembly (9) on to the motor base (7) and press down until securely
engaged.
How to Use:
1. Place the food you wish to process into the glass jar.
2. Cover the lid on the glass jar and close securely. Place the measuring cup onto
the lid and turn clockwise to lock.
3. Switch on the motor base:
NOTE: Operate the motor for a maximum of 60 seconds or alternating 60 seconds
ON, then 60 seconds OFF to prevent overheating or consequent damage.
SPEED SETTING USE
1 (Low) for light usage with liquids
2 (High) for more solid consistency – for mixing liquids
and solid foodstuffs
M (Manual Pulse setting) for ice crushing & short, powerful impulse
movements
(The switch does not permanently engage in the ‘M’ setting. You have to press and
hold the ‘M’ button)
• After using the blender, always move the switch to the ‘0’ setting and pull out the
mains plug.
• To remove the glass jar simply lift it off the motor base. You do not have to rotate
the glass jar to remove it.
Useful tips:
To achieve the best results when pureeing solid ingredients, place small portions
into the glass jar one by one instead of placing a large quantity all at once.
If you are processing solid ingredients, cut them into small pieces (2-3cm) first.
When mixing solid ingredients start off first with a small amount of liquid.
Gradually add more and more liquid through the opening in the lid.
Always place your hand on top of the blender when you are operating the device.
Be careful when processing hot liquids.
For stirring solid or very thick liquid ingredients we recommend that you use the
blender in impulse mode (by pressing and holding the “M” button) to prevent the
blades from becoming stuck.
Motor Base:
Never immerse the motor base in water. Wipe clean only with a moist cloth.
Simple cleaning / rinsing out the assembled glass jar:
Empty the glass jar and fill with clean water. Place the glass jar on the motor base
and turn the switch several times to the ‘M’ setting. Empty the glass jar and rinse until
clean.
Thorough cleaning of the dismantled glass jar:
Ensure that the glass jar is completely empty before you unscrew the retaining ring.
Be careful when handling the cutting blade. All removable parts are suitable for the
dishwasher.
*We reserve the right to make amendments.
If this product is defective or not working properly
Please DO NOT return to your retail store
Please contact us directly with any
Service or Technical Assistance
Contact us toll free at:
1-800-330-0388
3 4
Otros manuales de Licuadora de SPT
