CHARGING THE EARBUDS
Charge the earbuds by placing them into the
charging case and carefully aligning the charging
contact on both the earbud and case.
CHARGING THE CASE
Connect the case to a 5V power adapter via
the USB-C input using the included USB-A to
USB-C cable.
Note: It is recommended that you fully charge
the case and earbuds before first use.
The recommended charging time is 1-2 hours.
4 white lights on: Baery 100%
3 white lights on: Baery 75%
2 white lights on: Baery 50%
1 white light on: Baery 25%
CHARGING CASE BATTERY LED INDICATOR
3. QUICK START GUIDE 3. QUICK START GUIDE
POWER ONOFF
The earbuds will turn on automatically when
removed from the charging case and will turn o
when placed back in the case with the lid closed.
To manually power on, hold the touch sensor on
either earbud for 2 seconds. To manually power o,
disconnect from your device’s Bluetooth and hold
the touch sensor for 8 seconds.
CONNECTING VIA BLUETOOTH
The le and right earbuds will be automatically pair to
each other when removed from the charging case.
The earbud LED indicator will flash red and blue
to indicate the earbuds are in pairing mode.
Turn on Bluetooth on your mobile phone/music
device*. Open your list of Bluetooth devices,
select “CADENCE TWS” to pair. Once a device
is connected, the earbud LED indicators will be
solid blue.
Single ear use will also be supported.
*If you are not familiar with Bluetooth pairing for your mobile phone
or music device, refer to the user guide for your mobile phone/
music device for instructions to pair a new device using Bluetooth.
54
