Q: Only one earbud is working.
A: Place both earbuds in their charging case and close.
Next, open the case and commence using the
earbuds again. This will prompt them to reconnect.
Q: The case is not charging via cable.
A: Check that the charging cable is plugged in at
both the case end and the adapter. If it is still
not charging, try replacing your charging cable.
Q: The case is not charging via wireless charger.
A: Ensure the charging case is placed upright with
the wireless charging coil aligned to the charging
pad. If the case is still not wirelessly charging, try
slightly adjusting it on the charging pad until the
LED lights indicate charging mode.
Q: The charging case is not charging the earbuds.
A: Generally this means that the case is out
of charge. This can be confirmed by checking
the LED indicator on the front of the case.
Charge the case as per the instructions provided.
Note: The earbuds will turn o automatically aer
five minutes if they are not paired with any device
via Bluetooth. Likewise, earbuds will enter standby
mode to save power if no incoming audio source is
received for five minutes.
When baery capacity is less than 20%, user will
hear a “baery low” voice prompt.
• Bluetooth version: 5.3
• Case baery: 500mAh +NTC
(negative temperature coecient)
• Hybrid Active Noise Cancellation (ANC)
• Earbuds baery: 45mAh Lithium baery
• Earbud audio playtime without ANC: 7 hours at
50% volume
• Earbud audio playtime with ANC: 5 hours at
50% volume
• Total audio playtime without ANC: Up to 29 hours
at 50% volume, including earbud recharges
• Time to fully charge case through USB-C port:
1.5 hours
• Time to fully charge case via wireless charging:
Approx. 5 hours
• Time to fully charge earbuds in case: 1.5 hours
• Earbud charging input: 5V 40mA
• Driver: 10mm, 32 Ω, 104dB, 20-20kHz
• Case charging current: 500mA
• Bluetooth range: 10m
• 1x Touch control sensor per earbud
4. TROUBLESHOOTING 5. SPECIFICATIONS
98
