Springtree P200RGBW LED Manual de usuario

USER MANUAL AND

INSTALLATION GUIDE

Springtree

P200RGBW LED

Ellipsoidal

2(615) 599-1505 www.springtree.net

Table of Contents

1. Before You Begin

What is included.......................................................................................................................3

Safety precautions....................................................................................................................3

2. Product Information

Description................................................................................................................................4

Features....................................................................................................................................4

3. Installation

Power supply.............................................................................................................................5

Mounting....................................................................................................................................5

Adjusting the shutters................................................................................................................6

Using a gobo.............................................................................................................................6

 Usingagelorlter.....................................................................................................................6

DMX linking...............................................................................................................................7

4. Operation

Touch buttons...........................................................................................................................7

Operating modes......................................................................................................................7

LED display menu....................................................................................................................8

DMX Modes..............................................................................................................................8

5. Maintenance

Cleaning your ellipsoidal...........................................................................................................8

6. Technical Specications

Beam angles.............................................................................................................................9

Dimensions...............................................................................................................................9

Troubleshooting.......................................................................................................................10

Warranty...................................................................................................................................10

Contact us...............................................................................................................................10

(615) 599-1505 www.springtree.net

Before You Begin

What is included

When you open your package, there should

be four items inside of the box:

1. One LED Ellipsoidal light with

a 19°, 26°, 36° OR 50° lens

2. One gobo holder

3. One gel frame

4. One Powercon power cord

*If any of these items is damaged or missing,

please contact Springtree Media Group.

Safety precautions

•Toreducetheriskofelectricalshockorre,donotexposethisunittomoisture.

• Be sure that the local power outlet matches that of the required voltage for your unit

• Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt

 toremoveorbreako󰀨thegroundprongfromtheelectricalcord.Thisprongisusedto

 reducetheriskofelectricalshockandreincaseofaninternalshort.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user serviceable parts inside. •

Never plug this unit into a dimmer pack.

• Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6”

between this device and a wall.

•ThisxtureisintendedforindooruseONLY.

• During long periods of non-use disconnect the unit main power.

• Always mount this unit in a safe and stable matter.

• Keep this manual for as long as you own this product!

4(615) 599-1505 www.springtree.net

• 200W RGBW LED COB

• Digital Display

• Interchangeable 19°, 26°, 36° or 50° lenses

• Lightweight 13.6 lb (6.1kg) body

• Three pin XLR jacks

• 6 DMX Modes

• Gobo holder

• Gel frame

• 4 shutters for controlled spotlighting

• Linking Powercon IN/OUT

Product Information

Features

Description

The Springtree P200RGBW LED

Ellipsoidalisapowerful,versatilexture

with all of the professional features found

on higher priced units.

(615) 599-1505 www.springtree.net

Power Supply

Before plugging your unit in, be sure the source voltage in your area matches the voltage

required for your lighting setup. Every unit has a power supply capable of 120V. Because line volt-

age may vary from venue to venue, you should be sure your unit voltage matches the wall outlet

voltage before attempting to operate your unit.

* Always connect this product to a protected circuit with an appropriate electrical ground to avoid the risk

  ofelectrocutionorre.

Mounting

When mounting your ellipsoidal, make sure there is adequate room for ventilation. Operating

inaninsu󰀩cientlyventilatedroomcanleadtoanoverheatingofthedeviceandmaycauseserious

accidents. Keep a minimum distance of 6 inches around and above the device. Before

deciding on a location, mount in a way that it will be easy to access the unit for maintenance and

addressing.

Installation

6(615) 599-1505 www.springtree.net

Adjusting the shutters

To adjust the width and shape of the beam, simply push or pull any of the four shutters

located around the body of the ellipsoidal.

Gobo holder

Gel frame

Framing shutter

(top)

Framing shutter

(left)

Framing shutter

(bottom)

Using a gobo

If you want to shape your light with a gobo,

insert it into the included gobo holder so that it is

visible through the circular hole. In order for your

gobo to be projected correctly, it should be inserted

upsidedownandipped.Afteryou’veinserted

your gobo into the holder, screw the holder shut

so that the gobo is secure and does not move. Slide the holder into the slot located in front of the

top shutter. When removing the gobo, make sure to let it cool before handling.

Using a gel or lter

To alter the color of your light beam

insert a gel into the included gel frame.

Screw the frame closed so that the

gel is secure and does not move.

Slide the holder into the slots

located in front of the lens.

When removing the gel and

holder, make sure to let it

cool before handling.

To look like this Insert like this

(615) 599-1505 www.springtree.net

DMX linking

An LED Ellipsoidal can be connected to a DMX controller by a 3-pin XLR cable, allowing total

control over one or more lights. To do this, connect an XLR cable from the DMX-input (labeled DMX

IN) on your lighting unit to the DMX-output of the controller. Connect a second light via its DMX-in-

puttotherstunit’sDMX-output(labeledDMX OUT) to control and synchronize muiltiple lighting

units at once. DMX IN

DMX IN DMX IN

DMX OUT DMX OUT

Operation

Touch buttons

There are four touch buttons on the back of this unit: MENU, ENTER, UP and DOWN.. Normally

theLEDwilldisplaythecurrentDMXaddresscodeofthexture.PressMENUtochoosethede-

siredfunctionandpressENTERtoconrm.

Operating modes

This light can operate in two modes:

• DMX control mode- this function will allow you to control each individual unit with a standard

DMX 512 controller

• Master-slave mode- one unit will work as the master in one of the above three modes, and

other units in the chain will work in sychronization towards the master

8(615) 599-1505 www.springtree.net

LED display menu DMX Modes

STATIC Red 0-255

Green 0-255

Blue 0-255

White 0-255

Strobe 0-20

AUTO 1-10

Custom 1-10

SP 0-99

ADDRESS A001-A512

RUN DMX

Slave

Sound

MODE TOUR (7Chan)

ARC1

ARC1+D

ARC2

ARC2+D

ARC2S

ARSD

ID 1-66

EDIT Custom 1-10

SET Upload (password required, no user function)

Cal1 (white 1-11) (no user funtion)

Dim (1-4, off) (dim fade rate 1 fastest, 4 slowest)

Dim Curve (para, line, s-curve, sv-curve)

Back (on, off)

DMX Stat (off,prog1, black)

Version (firmware version)

Temp (operation temp)

Hour (operation hours)

Fans (off, low, normal, high, auto)

ID (off, on)

Power (low, High)

RESET reset fixture to factory default

ARC1 3 Channel Mode

1Red

2Green

3Blue

ARC1+D 4 Channel Mode

1Dimmer

2Red

3Green

4Blue

ARC2 4 Channel Mode

1Red

2Green

3Blue

4White

ARC2+D 5 Channel Mode

1Dimmer

2Red

3Green

4Blue

5White

ARC2S 6 Channel Mode

1Dimmer

2Red

3Green

4Blue

5White

6Strobe

TOUR 7 Channel Mode

1Dimmer

2Red

3Green

4Blue

5White

6Strobe

7Macro

(615) 599-1505 www.springtree.net

Maintenance

Cleaning your ellipsoidal

Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be

carried out periodically to optimize light output.

  1.Usenormalglasscleanerandasoftclothtowipeo󰀨theoutsidecasing.

2. Clean the external optics with glass cleaner and a soft cloth every 20 days.

3. Always be sure to dry all parts completely before plugging the unit back in.

*Cleaning frequency depends on the environment in which

the unit operates (i.e. smoke, fog residue, dust, dew).

Troubleshooting

Listed below are a few common problems that you may encounter

when using this product:

Unit not responding to DMX:

1. Check that the DMX cables are

connected properly and are

wired correctly. DMX output DMX input

2. Check that all cables are connected to the right connectors; it does matter

which way the inputs and outputs are connected.

10 (615) 599-1505 www.springtree.net

 TechnicalSpecications

• Power Supply: AC120V, 50/60Hz

• Power Consumption: Max. 200W

• LED: RGBW COB

• Flicker Free

• ElectronicStrobe:1-20ash/s

• Display: 4-digit LED

• Data In/Out: XLR 3Pin

• Switch Power Supply: Built-in and auto switching

• Cooling: Entire casing heat sink plus 2 fans

• Housing: Plastic

• Housing Color: Black

• IP Rating: IP20

• Environment Temp: -30°C-50°C with single yolk

• Dimensions(mm): L25.3 x W7.9 x H6.7

• Net Weight: 13.6 lbs

Dimensions:

Beam Angles:

Tabla de contenidos

Manuales populares de Luminaria de otras marcas

Emos

Emos CLASSIC ZY1431T Manual de usuario

Westinghouse

Westinghouse Outdoor Lighting Fixture Manual de usuario

Hedler

Hedler C 12 silent Manual de usuario

Blizzard Lighting

Blizzard Lighting Puck: CSI Manual de usuario

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manual de usuario

Lightmaxx

Lightmaxx Shaft 5R Manual de usuario

Triarch

Triarch 31083 Manual de usuario

Philips

Philips 32614 Series Manual de usuario

IKEA

IKEA TIVED Manual de usuario

Lightolier

Lightolier LP200 Manual de usuario

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manual de usuario

Martin

Martin MAC 250 Krypton Manual de usuario

Cooper Lighting

Cooper Lighting Halo L3232E Manual de usuario

Stageline

Stageline ODW-2410RGBW Manual de usuario

Light Sky

Light Sky Tornado Series Manual de usuario

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manual de usuario

Lightolier

Lightolier Lytespan 83ED17S Manual de usuario

Lightolier

Lightolier Calculite CS8226 Manual de usuario