Split-fire 4090 Manual de usuario
1
Thank You for Purchasing a Split-fire 4090
Woodchipper!
We appreciate having you as our customer and wish
you many years of safe and satisfactory operation
with your machine.
SPLIT-FIRE SALES INC.
285633 Airport Road
Norwich, ON N0J 1P0
Canada
1-877-548-3473 / 519-468-3647
Please share a google review about your
Split-Fire experience
Table of Contents
1. Introduction 4
1.1 How to use your Owner’s Manual 4
1.2 Product Identification 6
1.3 Warranty 8
2. Safety 9
2.1 Safety Labels 9
2.2 Wood Handling Safety 15
2.3 Operation Safety 16
2.4 Worksite Safety 18
2.5 Option Safety / Operation 19
2.51 Engine Guard 19
2.52 Heavy Duty Tire/4-Bolt Hub 20
2.53 Lights & Fenders 21
2.54 Rear Hitch 22
2.55 Caster Wheel 23
3. Chipping Capacity 24
4. Operating Instructions 25
4.1 Before Operation 26
4.2 Operation 27
4.3 After Operation 29
4.4 Operation Troubleshooting 30
5. Maintenance 33
5.1 Engine Maintenance 33
5.2 Woodchipper Maintenance 33
5.21 Blades / Rotor 33
5.22 Rotor 34
5.23 Anvil 34
5.24 Bearings 35
5.25 Clutch 35
5.26 Belt 36
5.27 Wheels 38
5.28 Latch Maintenance 38
5.29 Torque Spec Chart 39
6. Storing your Chipper 40
7. Towing your Chipper 41
8. Checklists 44
9. Parts Breakdowns 46
4090 Woodchipper
Introduction Owners Manual
4
1.1 How to use your Owner’s Manual
This owner’s manual is a very important part of your new machine
and should remain a permanent part of it. If the machine is sold, the
operator’s manual must go with it.
By reading the operator’s manual you will help yourself and others
avoid unnecessary personal injury and/or damage to the machine
and will also allow you to perform maintenance to keep your machine
operating properly. The information recorded in this manual will help
you use this machine safely and effectively. Once you know how to
operate the machine correctly and safely, you can train others to
operate the machine as well.
If your machine has been ordered with any options or attachments,
please refer to the option safety section of the individual operator’s
manual that is included with that specific accessory.
The machine that is used in this manual for illustration may differ
slightly from your model. It will be similar enough to help you
understand our instructions.
Throughout this manual the terms “Left Hand” and “Right Hand” will
be used. These sides are determined when standing in front of the
engine by the hitch. The “Throttle Control” side of the engine is the
right side. Also “Back” and “Front” will be used. On the 4090
woodchipper the “Back” is referred to the chip discharge side. So the
discharge chute would be located on the back left of the 4090
woodchipper.
Your machine has been tested and inspected to pass quality control
at Split-fire’s Manufacturing facility to ensure good performance prior
to leaving the factory.
4090 Woodchipper
Owners Manual Introduction
5
While reading the manual, important messages are used to bring the
operator’s attention where there may be safety concerns relating to
machine damage and important servicing information. Please read
all these messages to avoid personal injury and machine damage.
The three main messages will start with:
WARNING!!!: which suggests, a strong chance of personal
injury or death to the operator or bystanders if procedures are
ignored.
IMPORTANT: which suggests, a strong chance of potential
damage to the machine may occur if procedures are ignored.
NOTE: suggests to the operator, General information given to
help the operator to operate or service the machine.
4090 Woodchipper
Introduction Owners Manual
6
1.2 Product Identification
If you ever need to contact your dealer or the manufacturer for parts
or questions regarding the operation or servicing of the machine, it is
important to have the model number as well as all the necessary
identification numbers. Using the sample pictures on page 7 you can
find the necessary numbers to complete the spaces below.
Date of Purchase:
______________________
Dealer Name:
___________________________________________
Dealer Phone Number:
______________________
Frame Serial Number: ( XX XX XX )
______________________
Engine Serial Number (If equipped with engine): ( XXXXXXX )
______________________
4090 Woodchipper
Owners Manual Introduction
7
Engine Serial Number
Frame Serial Number
4090 Woodchipper
Safety Owners Manual
8
1.3 Warranty
Split-Fire Sales Inc. guarantees the original purchaser of any new
Split-Fire machine, that the same is free of defects in workmanship or
materials that may cause performance failure, subject to the
condition’s hereafter.
Split-fire must be contacted before the problem on the machine has
been fixed. Split-fire will diagnose the problem and authorize any
warranty work that will be allowed. If Split-fire does not authorize or
parts are not sent from Split-Fire, warranty will not be applicable.
This guarantee is limited to a period of one year from the date of
purchase. Replacement of any defective part is free of charge FOB
Split-Fire Sales Inc. If Split-Fire requires the parts to be returned to
Split-Fire, Split-Fire will pay for return shipping.
This guarantee does not apply to engines or other parts that are
manufactured and guaranteed by the manufacturer thereof, nor does
this apply with respect to any part or product that:
1. has original parts removed or otherwise altered without
specific authorization beforehand from Split-Fire Sales Inc.
2. has had placed upon or attached to it, any part or product not
sold or approved by Split-Fire Sales Inc.
3. has been damaged or is not used in conformity with the
applicable instruction for the machine.
4. has not been properly adjusted or maintained by the owner.
5. has been adjusted or altered to increase the performance of
the machine.
This guarantee is in lieu of, and excluded all other guarantees and
conditions of merchantability and fitness for a purpose. Acceptance
of a Split-Fire Sales product constitutes an agreement that Split-fire
Sales shall have no liability for any special or consequential damage.
4090 Woodchipper
Owners Manual Safety
9
2.1 Safety Labels
The machine safety labels shown in the section below are very
important. They are placed in areas on the machine that draw the
attention of the operator to potential safety hazards on the machine.
If at any time the stickers are removed, or come off, contact your
dealer or the manufacturer immediately for replacement decals.
The operator’s manual explains the potential safety hazards in detail
associated to each decal. Special attention should be kept for these
recommendations. They are outlined for your safety.
The Emergency Stop switch is a safety switch that is an easy access
switch to turn off the woodchipper in case of an emergency. The
emergency switch is situated just above the engine for easy access.
The engine will shut off when pushed and can be reset to the run
position by twisting and pulling lightly.
4090 Wood Chipper
Safety Owners Manual
10
This sticker is located in the infeed chute. Do not remove or modify
safety guards on this machine or serious injury or death may occur.
Safety guards have been put in place for safe operation and must not
be removed at any time during operation.
This sticker is located in the infeed chute. Do not put hands, arms,
feet, legs or any body part in the infeed chute. If material needs to be
pushed down to engage the chipping blades use a forked push stick.
This will allow you to push the material into the blades without risk of
injury or harm.
Tabla de contenidos
Otros manuales de Alegre de Split-fire
