GTM Professional GTS 1300 Manual de usuario
User manual GTS1300
Wood chipper
English
Original instructions
D09-GS13S50-12
Preface
© Technische Handelmaatschappij J. De Wild B.V.
This document or parts thereof may not be reproduced, copied, distributed, stored in a retrieval
system, or transmitted in any form or by any means, electronically nor otherwise, without the prior
written permission of Technische Handelmaatschappij J. De Wild B.V.
Specifications and illustrations are subject to change without prior notice. Technische
Handelmaatschappij J. De Wild B.V. will not accept liability for any alteration or typing error. Details
and values given in this manual are average values and have been compiled with care. They are
not binding, however, and Technische Handelmaatschappij J. De Wild B.V. disclaims any liability
for damage or detriments suffered as a result of reliance on the information given herein or the use
of products, processes or equipment to which this document refers.
Introduction
2D09-GS13S50-12
Contents
1 Introduction............................................................................................... 6
1.1 About this document..................................................................................................................... 6
1.1.1 Purpose of this document................................................................................................. 6
1.1.2 Language.......................................................................................................................... 6
1.1.3 Illustrations........................................................................................................................6
1.1.4 Symbols used in this document........................................................................................ 6
1.2 About the machine and model types in this document................................................................. 7
1.3 How to use this document............................................................................................................ 7
1.4 Contact information.......................................................................................................................7
1.5 Warranty conditions...................................................................................................................... 7
2 Safety........................................................................................................9
2.1 Approved user.............................................................................................................................. 9
2.2 Liability..........................................................................................................................................9
2.3 Personal protective equipment..................................................................................................... 9
2.4 Safety signs on the machine.......................................................................................................10
2.5 Safety instructions...................................................................................................................... 13
2.5.1 General safety instructions............................................................................................. 13
2.5.2 Safety instructions for use...............................................................................................13
2.5.3 Safety instructions for maintenance, transport and storage............................................14
2.6 Disposal...................................................................................................................................... 14
3 Description.............................................................................................. 15
3.1 Intended use............................................................................................................................... 15
3.2 Identification of the machine....................................................................................................... 15
3.3 Overviews................................................................................................................................... 16
3.3.1 Overview of the main components..................................................................................16
3.3.2 Overview of the engine controls......................................................................................17
4 Installation...............................................................................................18
4.1 Install the input............................................................................................................................18
4.2 Install the output......................................................................................................................... 19
4.3 Install the handle.........................................................................................................................20
5 Instructions for use..................................................................................21
5.1 Prepare for use........................................................................................................................... 21
5.2 Fill the fuel tank...........................................................................................................................21
5.3 Start the machine........................................................................................................................22
Contents
D09-GS13S50-123
5.4 Use the machine.........................................................................................................................22
5.5 Stop the machine........................................................................................................................22
5.6 Transport the machine................................................................................................................23
5.7 Use the panic bar in case of an emergency............................................................................... 23
5.8 Release the panic bar.................................................................................................................23
6 Preventive maintenance......................................................................... 25
6.1 Preventive maintenance schedule..............................................................................................25
6.2 Do a functional test of the panic bar........................................................................................... 25
6.3 Do a detection test of the output.................................................................................................26
6.4 Clean the machine......................................................................................................................26
6.5 Do a check of the tension of the belts.........................................................................................26
6.6 Replace the air filter....................................................................................................................27
6.7 Fill the engine with oil................................................................................................................. 27
6.8 Lubricate the bearing housing.................................................................................................... 28
6.9 Replace the belts........................................................................................................................ 28
6.9.1 Remove the cover...........................................................................................................29
6.9.2 Remove the belts............................................................................................................ 29
6.9.3 Install the belts................................................................................................................ 29
6.9.4 Adjust the tension........................................................................................................... 30
6.9.5 Do a check for correct operation.....................................................................................30
6.10 Align the pulleys..........................................................................................................................31
7 Corrective maintenance.......................................................................... 32
7.1 Do maintenance on the blades................................................................................................... 32
7.1.1 Lock the rotor.................................................................................................................. 32
7.1.2 Remove the blades......................................................................................................... 32
7.1.3 Turn the blades............................................................................................................... 33
7.1.4 Sharpen the blades.........................................................................................................33
7.1.5 Install the blades............................................................................................................. 34
7.1.6 Adjust the gap................................................................................................................. 34
7.1.7 Finish.............................................................................................................................. 35
7.2 Do maintenance on the engine...................................................................................................35
7.3 Remove a blockage.................................................................................................................... 35
7.3.1 Do a visual check............................................................................................................35
7.3.2 Remove the output..........................................................................................................35
7.3.3 Remove the input............................................................................................................36
7.3.4 Remove the blockage..................................................................................................... 37
7.3.5 Use the rotor deblocking tool.......................................................................................... 37
7.3.6 Finish.............................................................................................................................. 38
7.4 Replace a safety sign................................................................................................................. 38
Contents
4D09-GS13S50-12
8 Troubleshooting...................................................................................... 39
8.1 General troubleshooting procedure............................................................................................ 39
8.2 Troubleshooting table................................................................................................................. 39
9 Technical specifications.......................................................................... 40
9.1 General specifications................................................................................................................ 40
9.2 Material specifications................................................................................................................ 41
9.3 Engine specifications.................................................................................................................. 41
9.4 Working area.............................................................................................................................. 43
9.5 Danger area................................................................................................................................44
9.6 Wiring diagram............................................................................................................................45
Contents
D09-GS13S50-125
1 Introduction
1.1 About this document
1.1.1 Purpose of this document
This document contains the information and instructions for an approved user to safely do
these tasks:
• Use the machine.
• Do user maintenance on the machine.
• Do user troubleshooting on the machine.
For the requirements of the approved user, refer to section
2.1
.
1.1.2 Language
The original language of the document is English. All other available language versions
are translations of the original instructions.
1.1.3 Illustrations
The illustrations in this document show a typical setup with relevant details for
instructional use only. Minor differences between the illustrations and the machine are
possible but do not have an effect on the comprehensibility of this document.
1.1.4 Symbols used in this document
Icon Signal word Description
Warning Injury or death is possible if
you do not obey the instruc-
tions.
Caution Damage to equipment is
possible if you do not obey
the instructions.
Note Gives additional information.
N/A Information about the condi-
tion of the machine before
you start the procedure.
N/A Information about spare
parts that are necessary for
a procedure.
Introduction
6D09-GS13S50-12
Icon Signal word Description
N/A Information about support
equipment that is necessary
for a procedure.
N/A Information about supplies
(consumables) that are nec-
essary for a procedure.
1.2 About the machine and model types in this document
This document is applicable for the wood chipper GTS1300.
Note:
•For identification of the model type, refer to section
3.2
.
• In this document, the wood chipper GTS1300 is referred to as the
machine.
1.3 How to use this document
1. Read this document completely. Make sure that you know and understand all the
instructions.
2. Obey the safety instructions to prevent injury and/or damage to the machine.
3. Do the procedures completely and in the given sequence.
4. Keep this document in a safe area for future use. This document is part of the
machine.
1.4 Contact information
Company name Technische Handelmaatschappij J. De Wild B.V.
Address De Meeten 54
4706 NH Roosendaal
The Netherlands
Email [email protected]
1.5 Warranty conditions
Note:
For the warranty conditions of the engine, refer to the OEM documentation of
the engine.
The purchase invoice and the serial number of the machine is the warranty certificate.
Speak to your dealer for the after sales service.
The warranty includes:
•Factory and component faults.
• Replacement of faulty parts and the involved work.
Introduction
D09-GS13S50-127
The warranty excludes:
•Parts that are subject to wear.
• Transport costs for part replacement.
The warranty will be void when you do not obey these rules:
• The machine must be operated by approved users.
• Use the machine only as described in this document.
• Obey the safety, user and maintenance instructions in this document.
• Use original spare parts.
• Do not make unapproved changes to the machine.
• Only your dealer is allowed to repair the machine.
Introduction
8D09-GS13S50-12
2 Safety
2.1 Approved user
A user must:
• Be 18 years or older to operate the machine.
• Never be under the influence of drugs or alcohol when operating the machine.
• Be familiar with and obey the safety instructions.
• Be able to stop the machine immediately.
• Be aware of the rules and regulations for the environment and for noise levels.
• Wear personal protective equipment. Refer to section
2.3
.
All users are responsible for:
• Damage caused to a third party.
• The safety of all persons within a radius of 12 m.
2.2 Liability
Technische Handelmaatschappij J. De Wild B.V. is not liable if you do not obey these
instructions:
• Obey the safety instructions. Refer to section
2.5
.
• Use the machine only as described in section
3.1
.
• Use original spare parts.
• Do not make unapproved changes to the machine.
• Only operate and do maintenance on the machine as described in this document.
2.3 Personal protective equipment
When you use the machine, always wear appropriate personal protective equipment:
• Ear protection
• Eye protection
• Cut resistant gloves
Warning:
You must stop the work every hour for a minimum of 15 minutes to prevent
noise-induced hearing loss.
Safety
D09-GS13S50-129
2.4 Safety signs on the machine
120
Safety
10 D09-GS13S50-12
Otros manuales para GTS 1300
1
Tabla de contenidos
Otros manuales de Alegre de GTM Professional
