
Installation and Setup Manual Issue 3 Spirent VisionWorks 7528 Probe
-iv
2.6.2 TCP/IP Ethernet management port pinout (MANAGEMENT) . . . . . . . . . . . . 2-10
2.7 Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
2.7.1 Unit configuration/administration commands . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
2.7.2 Test access commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13
2.7.3 Data testing commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14
2.8 Detailed specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18
2.8.1 Dimensions and weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18
2.8.2 Power and overcurrent protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18
2.8.3 Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19
2.9 Regulatory compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19
Installation
3.1 Site planning and engineering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
3.1.1 Power and fusing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
3.2 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
3.2.1 ESD notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
3.2.2 General installation notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
3.2.3 Required tools and equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
3.2.4 Documentation requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
3.2.5 Unpacking and inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
3.2.6 Rack ear installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
3.2.7 Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
3.3 Wiring connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
3.3.1 Optical transceivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
3.3.2 Management and test interface wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
3.3.3 DC power wiring (DC-powered models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
3.3.4 AC power cord connection and retaining clip . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
3.4 Powering up and shutting down the unit . . . . . . . . . . . . . . . . . . . . . . . . 3-10
Verification and Configuration
4.1 General operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
4.1.1 About RTU mode and an OSS architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
4.1.2 Basic management communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Conducting async management communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Preparations for async communications over USB . . . . . . . . . . . . . . . . . . . . . . 4-3
Manually installing the USB driver (One-time task) . . . . . . . . . . . . . . . . . . . . . . 4-3
Connecting the cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Accessing a TL1 prompt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Conducting Ethernet management communications . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5