SpinTouch RapidScreen Plus V1 Manual de usuario
Quick Start Guide
In this Quick Start Guide, we're going to walk through how to set up the RapidScreen.
Right out of the box this unit will already be capable of scanning users and taking their
temperatures. Some changes may need to be made to the application based on your
individual requirements.
Compatible with the following models: RapidScreen Plus V1, RapidScreen Plus V1S
TABLE OF CONTENTS
Stand Assembly Instruction...............................................................................................2
Calibration video…………………………………………………………………………………..3
Included In the Box / Mouse Instruction…........................................................................4
Exiting / Auto Startup / Starting the Application..............................................................5
Volume Settings...................................................................................................................6
Temperature Adjustment SettIngs.....................................................................................7
Changing the Password......................................................................................................8
Connecting the WiFi............................................................................................................9
Changing the Time Zone...................................................................................................10
Adding Users to the Face Database (on device)............................................................11
Adding Users to the Face Database (backend)..............................................................12
Software Factory Reset……………...................................................................................13
Smart Pass Management Overview ……….....................................................................14
Connecting RapidScreen Kiosk to Smart Pass ....................................................15 & 16
Email Alert Setup ………………........................................................................................17
Text Alerts Setup………………………………………………………………………………...18
MOUSE INSTRUCTIONS
Right Mouse Button
The right mouse button can be used to exit a page or
go back. It can also be used to bring up the password
prompt to access the Android home screen.
(default password 123456)
Center Mouse Button
The center mouse button can be used to bring up the
password prompt to access the application settings.
Please note, the button must be clicked, not scrolled.
(default password 123456)
Left Mouse Button
The left mouse button is used to make selections.
4
INCLUDED IN THE BOX
-RapidScreen PLUS v1 [Silver aluminum body and black glass front]
-3-button mini wired mouse
- Mini screwdriver
- 2x USB extension cables
- 1x power extension cable
- A couple zip ties
- Thank you card with support information
In the interest of a contact-less system the device is NOT a touchscreen, a
USB mouse is required to access the menus & settings.
EXITING THE APPLICATION
1. On the application main screen, press the back mouse
button to bring up the password prompt.
2. Enter the password (default 123456)
3. This will take you to the Android main screen.
STARTING THE APPLICATION
1. If you’ve made changes to the android device and need to start the application from
the android main screen, click on the small up arrow to bring up the list of apps.
2. Click on MIPS to start the application.
3. When the application loads, go back into the application settings and turn all Start
Up Settings back to ON.
5
TURN AUTOSTART ON/OFF
1. Within the main menu, click on Application Settings.
2. Find Start Up Settings, from here you can turn on or
off the auto start up options of the app.
3. Save changes.
VOLUME SETTINGS
There are two volume settings from within the device:
1. Android OS Media Volume Controls
It’s important that the Media Volume levels of the Android OS does not exceed 80%, or you will risk
damaging the speakers when the alarm goes off. If the device is currently set to a higher volume, it’s
strongly suggested that you reduce the volume to below 80%. Alternatively you can turn off the Alarm
sound by going to: Temperature Adjustment Settings > Body Temperature Alarm > Off
2. Main MIPS Application Volume Controls
This volume can be set to any level with no issue provided the OS volume is below 80%.
ALTERNATIVE LOUDER SPEAKER OPTION
If your environment requires much louder alerts, we suggest connecting wireless bluetooth speakers to the
device, as the device does support wireless connectivity.
6
1. Android OS Media Volume Controls
(keep below 80%)
2. MIPS Application
Volume Controls
Body Temperature Test
Select off to disable the temperature reading feature
Compensation Temperature
This is to offset the read temperature, adjusting to environment
changes. ie, if your temperature is consistently below by -.5C,
set the compensation to +.5C. This is recommended.
Alarm Threshold
This is in Celsius. This is the value at which the alarm is
triggered. Users whose temperature passes this threshold will
trigger the alarm.
Body Temperature Alarm
This dictates whether or not the alarm will sound when a user
passes the temperature threshold.
Mask Detection
This will turn on or off the mask detection feature when users
check in without wearing a mask, they'll be denied entry even
with a normal temperature.
Stranger Mode
With the setting turned off, it will deny strangers access and
only allow registered facially recognized users to enter.
Turning the setting on will allow strangers to enter as well.
TEMPERATURE ADJUSTMENT SETTINGS
From the application home screen, press the middle mouse button, enter your password
(default: 123456), from the application menu, select the “Body Temperature Setting”
There will be an option to change temperature display from Celsius to Fahrenheit here.
7
CHANGING THE PASSWORD
1. From within the application, press the middle mouse button to bring up a
password
2. Using a USB Keyboard, or the on-screen keyboard, enter the default
password “123456” and click OK.
3. From the submenu, click on Application Settings and then find Password Settings.
4. Enter the default password (123456) into the password field. In the following
field, enter your new password.
“Please note. Any new password must be under 6 characters long.
If password is ever lost, the RapidScreen device will need to be returned to factory
settings to be manually reformatted. See the table of contents on how to properly
complete this process.”
5. Reconfirm by typing your new password into the last field, then then click save.
8
CONNECTING TO WIFI
1. After exiting the application, from the android main screen click on the gear icon at the
bottom of the screen. This will bring up the android settings for the device.
2. At the top, click on WiFi.
3. Select your WiFi network and enter the password when prompted.
4. After connecting to your desired WiFi network, press the right mouse
button to go back to the main screen and restart the application.
9
CHANGING THE TIME ZONE
1. Exit the application as shown earlier in this guide.
2. Click on the gear icon at the bottom of the android main screen and then scroll down
to find Date & Time.
3. After clicking Date & Time another menu will appear. Turn off the Automatic time
zone setting if not already done, then towards the bottom click on Select Time Zone.
4. Pick the appropriate location for your time zone and then click it.
5. Press the right mouse button to exit back to the android main screen and restart the
application.
10
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Instrumento de medición de SpinTouch
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario