SPINNAKER BRANDER Series Manual de usuario
BRADNER COLLECTION SP-5057
MINUTE
HAND
DATE
HOUR
HAND
SECOND HAND
1 2 3
AUTOMATIC 3 HANDS WITH DATE
CROWN
HOW TO SET THE TIME
1. Pull the crown out to position [3].
2. Turn the crown anti-clockwise to set the correct time.
3. Set to the correct time.
4. Push the crown back into position [1].
HOW TO SET THE DATE
1. Pull the crown out to position [2].
2. Turn the crown anti-clockwise to set the date.
3. Set the correct time.
4. Push the crown back into position [1].
* Do not set the date between 9:00 P.M. and 1:00 A.M.
* This watch MUST be worn for at least 8 (Eight) hours each day to ensure it is
fully wound. An automatic watch will only wind when the watch is on your wrist
and your arm moves. Winding the watch by the crown will put power on the
spring but not enough to allow the watch to function fully. If your watch stops
overnight or loses time it means it is not being fully wound.
[3]
[1]
[2]
[1]
HOW TO SET INNER BEZEL
1. Turn the upper crown anti-clockwise.
2. The inner bezel turns clockwise.
3. Set the elaspsed time on the bezel.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Mirar de SPINNAKER
SPINNAKER
SPINNAKER CROFT Manual de usuario
SPINNAKER
SPINNAKER TESEI BRONZE Series Manual de usuario
SPINNAKER
SPINNAKER TRANSAT SP-5036 Manual de usuario
SPINNAKER
SPINNAKER LIMITED EDITION HASS Manual de usuario
SPINNAKER
SPINNAKER TESEI Manual de usuario
SPINNAKER
SPINNAKER HUll Series Manual de usuario
SPINNAKER
SPINNAKER TRANSAT SP-5036 Manual de usuario
