9
2.1.5. It is not recommended to use other charging devices than those included into delivery set for
charging of standard battery as it can lead to its insufficient charge or breakdown.
2.1.6. It is prohibited to close battery leads as that can lead to its breakdown.
2.1.7. Do not store the battery at temperature above 60ºС, for example in a car exposing to direct
sunlight.
2.1.8. In case of work at lowered temperatures it is recommended to store the battery in warm places
for maintenance of its capacity, for example in a pocket, and insert it into the Device just before the
use.
2.1.9. It is recommended to charge the battery at ambient temperature from 10ºC to 30ºС.
2.1.10. It is prohibited to switch on charging device in the street on rainy weather or at high humidity.
2.1.11. At work and carrying of the Device it is prohibited to touch its objective and laser filter or
otherwise contaminate them as it can essentially worsen functionality of the Device. If any
contamination occurred it is necessary to wipe output laser filter and output objective optics
carefully.
2.2 Preparation for use.
2.2.1. For work with external LCD-monitor from 220 B:
Take out the device, AC/DC converter and LCD-monitor from standard packing;
Connect AC/DC converter to the Device inserting AC/DC converter plug into
Fix LCD-monitor on the Device inserting its fitting into the slide on Device’s body and
fastening by the screw;
Connect LCD-monitor to "Monitor" socket on Device’s body;
Insert AC/DC converter plug into power grid socket;
Switch on the monitor by pressing "POWER" button on the monitor.
2.2.2. For work from storage battery (SB):
Take out the Device and SB from standard packing;
If SB is not charged, it is necessary to charge it;
Place SB into battery compartment of the Device, unscrewing compartment screw and
removing its cover beforehand;
Close the battery compartment cover and screw up the fixing screw.
2.2.3. For SB charging with use of charging unit it is necessary to do the following:
Unscrew the battery compartment screw and remove the compartment cover;
Take out the storage battery (SB) from the Device;
Fix the storage battery in charging unit (ChU). For this purpose place the battery strictly
horizontally into contact platform cavity so that the symbol «◄» on the battery was directed to
two contact plugs. Thus two ChU contact plugs should contact corresponding sockets on the
battery. Then move the battery strictly horizontally to the arrow direction «◄» up to the stop so
that ChU contact plugs should safely join the sockets on the battery;
Connect adapter plug to ChU socket;
Connect the adapter to power grid;
On ChU display will be highlighted: signs « TIME OF CHG », «infoLITHIUM» and «FULL».
To the right from the sign « TIME OF CHG » figures are located which indicate charging time.
Inside the battery sign four dark horizontal strips are located which lighting also roughly shows
charge level;
