Spectris Arcom APOLLO Manual de instrucciones

APOLLO Windows XP Embedded Quickstart

APOLLO

Windows XP Embedded

Development Kit

Quickstart Manual

company

www.arcom.com

APOLLO Windows XP Embedded Quickstart

Definitions

Arcom is the trading name for Arcom Control Systems Inc and Arcom Control Systems Ltd.

Disclaimer

The information in this manual has been carefully checked and is believed to be accurate. Arcom assumes no responsibility

for any infringements of patents or other rights of third parties, which may result from its use.

Arcom assumes no responsibility for any inaccuracies that may be contained in this document. Arcom makes no commitment

to update or keep current the information contained in this manual.

Arcom reserves the right to make improvements to this document and/or product at any time and without notice.

Warranty

This product is supplied with a full 3 year warranty. Product warranty covers failure caused by any manufacturing defects.

Arcom will make all reasonable effort to repair the product or replace it with an identical variant. Arcom reserves the right to

replace the returned product with an alternative variant or an equivalent fit, form and functional product. Delivery charges will

apply to all returned products. Please go to www.arcom.com/support for information about product return forms.

Trademarks

Windows XP and Windows XP Embedded, Windows Embedded Studio, Target Designer, Component Designer and Visual

Studio are all trademarks of the Microsoft Corporation.

CompactFlash is a registered trademark of SanDisk Corp.

All other trademarks and copyrights referred to are the property of their respective owners.

Revision History

Manual PCB Date Comments

Issue A 27th June 2005 First full release of manual.

Arcom is a subsidiary of Spectris plc.

For contact details, see page 46.

Arcom operates a company-wide

quality management system, which

has been certified by the British

Standards Institution (BSI) as

compliant with ISO9001:2000

APOLLO Windows XP Embedded Quickstart Contents

Contents

Important notice .................................................................................................................................5

Introduction ........................................................................................................................................6

Handling your board safely ....................................................................................................7

About this manual ..............................................................................................................................8

Related documents ................................................................................................................8

Conventions ...........................................................................................................................8

Getting started ...................................................................................................................................9

What’s in the kit?....................................................................................................................9

What else do I need? ...........................................................................................................10

Unsupported hardware features ..........................................................................................10

Unpacking and connecting up..........................................................................................................11

BIOS settings .......................................................................................................................14

Flat panels .......................................................................................................................................15

Using Windows XP Embedded ........................................................................................................16

Networking ...........................................................................................................................16

Application development......................................................................................................17

Remote debugging for Microsoft Visual Studio 6 .................................................................17

Remote debugging for Microsoft Visual Studio .NET 2003 ..................................................17

Device drivers ......................................................................................................................18

Touchscreen.....................................................................................................................................19

Support software on the Development Kit DVD...............................................................................21

Sample images ....................................................................................................................22

Reinstalling the supplied Windows XP Embedded image................................................................24

.NET framework ...............................................................................................................................26

Network settings ..............................................................................................................................27

Remote Desktop Connection ...........................................................................................................28

Changing the startup logo................................................................................................................30

Setting up Windows Embedded Studio............................................................................................31

Installation............................................................................................................................31

Target Designer extensions .................................................................................................32

Configuration information.....................................................................................................34

Transferring a new image to the APOLLO .......................................................................................36

Using the DOS utilities on the Arcom USB memory stick ....................................................36

Preparing a new CompactFlash module..............................................................................37

Formatting a CompactFlash module....................................................................................38

Transferring an image..........................................................................................................39

Adding the XP boot loader ...................................................................................................40

Security and image duplication ........................................................................................................41

CompactFlash requirements................................................................................................41

Duplication of Windows XP Embedded images ...................................................................41

Customizing the Standard XPe image supplied to create a Master image ..........................44

APOLLO Windows XP Embedded Quickstart Contents

Restoring the Arcom USB memory stick..........................................................................................45

Appendix A – Contacting Arcom.......................................................................................................46

Appendix B – End User License Agreement (EULA) .......................................................................47

Attachment A........................................................................................................................48

Index ................................................................................................................................................50

APOLLO Windows XP Embedded Quickstart Important notice

Important notice

Arcom’s Windows XP Embedded Development Kit is supplied with a Windows XP

Embedded license. This allows you to develop, download and debug your Windows XP

application on the CompactFlash card. The Windows XP Embedded operating system

has been configured to run on the Arcom APOLLO processor. A copy of the operating

system image is included on the Development Kit DVD and may be used to restore the

image on the APOLLO Development Kit. The Windows XP Embedded License label is

attached to the CompactFlash card. The operating system image on the DVD may also

be used to create production copies of the supplied operating system.

The Windows XP Embedded product may be used in your product under one of the

following license options:

By purchasing boards or systems from Arcom with the operating system pre-loaded

onto a CompactFlash card, Arcom can supply Windows XP Embedded licenses.

The Microsoft OEM Customer License Agreement signed by Arcom states that we

must supply the Windows XP Embedded software pre-installed onto our equipment

or drives. The license label is attached to the CompactFlash card. Please contact

Arcom for information about license label costs.

•

If you intend to use the Windows XP Embedded operating system image supplied

by Arcom and purchase the Windows XP Embedded licenses directly from your

local Microsoft distributor, you must sign an OEM Customer License Agreement,

which is supplied by your Microsoft distributor. You are responsible for installing the

operating system on the Arcom product and applying the license label to your

finished product. Contact your local Microsoft distributor for license label costs.

If you intend to build your own version of the operating system and then purchase

Windows XP Embedded licenses, you must purchase a copy of the authoring tools

Windows Embedded Studio (consisting of Target Designer and Component

Designer) and sign an OEM Customer License Agreement. Windows Embedded

Studio is only available from a Microsoft distributor, it is not supplied by Arcom.

Please contact your local Microsoft OEM distributor for price information and to

obtain your OEM Customer License Agreement. On receipt of the signed OEM

Customer License Agreement, Microsoft (or the distributor) will issue you with a PID

number, which is an electronic key that allows you to create a specific operating

system from your Target Designer tool set. You must buy licenses for Windows XP

Embedded images you have created using Target Designer. You are responsible for

installing the operating system onto the Arcom product and applying the license

label to your finished product.

For more information about the End User License Agreement, see Appendix B – End

User License Agreement (EULA), page 47.

APOLLO Windows XP Embedded Quickstart Introduction

Introduction

Arcom’s Windows XP Embedded Development Kit is designed to provide a complete

environment and thus allow software engineers to concentrate on the development of

their application. The remainder of this manual describes the Windows XP Embedded

Development Kit. More information about the features available within Windows XP

Embedded can be found on the Microsoft web site, at

www.microsoft.com/windows/embedded/xp.

This Development Kit supports Windows XP Embedded Service Pack 2.

APOLLO Windows XP Embedded Quickstart Introduction

Handling your board safely

Anti-static handling

The boards in this Development Kit contain CMOS devices. These could be damaged in

the event of static electricity being discharged through them. Please observe anti-static

precautions at all times when handling circuit boards. This includes storing boards in

appropriate anti-static packaging and wearing a wrist strap when handling them.

Packaging

Should a board need to be returned to Arcom, please ensure that it is adequately

packed, preferably in the original packing material.

Electromagnetic Compatibility (EMC)

The APOLLO is classified as a component with regard to the European Community

EMC regulations. It is the user’s responsibility to ensure that systems using the board

comply with the appropriate EMC standards.

APOLLO Windows XP Embedded Quickstart About this manual

About this manual

This manual is designed to help you get your APOLLO up and running as quickly as

possible. It explains the components of your APOLLO Development Kit and tells you

how to unpack and connect the board. It also explains, amongst other things, the use of

Windows XP Embedded in the board, and how you can transfer images to the board.

Related documents

This kit also includes a DVD with a copy of this manual and a copy of the APOLLO

Technical Manual. Other manuals may be referred to from time to time. These are

normally provided on the DVD that accompanies your Development Kit.

Conventions

Symbols

The following symbols are used in this guide:

Symbol

Explanation

Note - information that requires your attention.

Tip - a handy hint that may provide a useful

alternative or save time.

Caution – proceeding with a course of action may

damage your equipment or result in loss of data.

APOLLO Windows XP Embedded Quickstart Getting started

Getting started

What’s in the kit?

Arcom’s APOLLO Windows XP Embedded basic kit comprises the following items:

APOLLO processor board (fitted with Gigabit Ethernet):•

•

- 1.6GHz Intel Pentium M CPU.

- 512MB PC2700 DDR RAM.

Low profile 180W Flex ATX power supply (100V - 240V AC Input).

1GB CompactFlash module pre-loaded with Windows XP Embedded SP2.

US, UK or European power cord.

2m RS-232 Null modem cable.

Breakout cable for GPIO header (with un-terminated wires).

Ultra-ATA -100 IDE cable (80 conductors).

2 x serial adapter cables for COM3 and COM4 (RS-232 ports).

1 x serial adapter cable for COM4 (RS-422/485).

2m CAT-5e cross-over Ethernet cable (suitable for Gigabit Ethernet).

SPDIF (Sony/Philips Digital Interface) optical cable assembly for high quality audio

channels.

USB to CompactFlash card adapter.

APOLLO Windows XP Embedded Development Kit DVD.

Microsoft Windows XP Embedded license, attached to the CompactFlash.

Bootable 256MB ‘Arcom’ USB memory stick.

Printed copy of the Windows XP Embedded Quickstart manual.

APOLLO interface board for power control switch, reset button, activity indicators,

USB and Firewire (IEEE1394) ports - supplied with interconnecting cables.

The following items are also included with the flat panel kit:

AUO 15" Color XGA 1024 x 768 pixel TFT flat panel display.

Backlight Inverter module (including 1m connecting cable).

1m LVDS flat panel adapter cable for APOLLO.

1m serial cable for touchscreen interface.

15" 8 wire analog touchscreen.

Arcom TSC1 touchscreen controller module.

APOLLO Windows XP Embedded Quickstart Getting started

What else do I need?

A USB or PS/2 keyboard.•

•

A USB or PS/2 mouse.

A VGA monitor (if not using the flat panel kit).

A development workstation with a spare USB port (USB2 recommended), running

Windows XP or Windows 2000.

If you intend to run Microsoft Windows Embedded Studio your system must have, in

addition to the requirements above:

- A 500MHz or higher processor (Pentium-class or faster recommended) with

512MB of RAM minimum; 1GB or higher recommended.

- Microsoft Windows 2000 Professional with Service Pack 4 or later, or Windows

XP Professional with Service Pack 1 or later.

- Microsoft Internet Explorer 5.5 or later.

- A DVD-ROM drive.

- 3.2GB of free disk space.

A Win32 development tool to develop your application, such as Microsoft Visual

C++, Microsoft Visual Studio .NET 2003 or Microsoft Visual Basic.

Unsupported hardware features

The following hardware features are not yet supported under Windows XP Embedded

on the APOLLO:

General Purpose Input/Output (GPIO).

Watchdog.

User Jumpers.

LCD Backlight.

Unique ID.

Tamper Detect.

Trusted Platform Module (TPM).

The APOLLO is part of a continuous process of development. Please contact a member

of the Technical Support team for the latest drivers. See Appendix A – Contacting Arcom

on page 46.

Otros manuales para Arcom APOLLO

Tabla de contenidos

Otros manuales de Microcontrolador de Spectris

Spectris

Spectris Arcom PEGASUS Manual de instrucciones

Manuales populares de Microcontrolador de otras marcas

AMS

AMS AS7261 Demo Kit Manual de usuario

Novatek

Novatek NT6861 Manual de usuario

Espressif Systems

Espressif Systems ESP8266 SDK Guía de configuración

Nuvoton

Nuvoton ISD61S00 ChipCorder Guía

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manual de usuario

Texas Instruments

Texas Instruments Chipcon CC2420DK Manual de usuario

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manual de usuario

NEC

NEC 78GK0S/K 1+ Series Instrucciones de instalación y funcionamiento

Mikroe

Mikroe SEMITECH N-PLC Click Instrucciones de instalación y funcionamiento

Intel

Intel Agilex Manual de usuario

Cypress

Cypress CY4607 HX2VL Manual de usuario

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manual de usuario

Texas Instruments

Texas Instruments TMS320F2837 D Series Manual de usuario

CYPRES

CYPRES CY14NVSRAMKIT-001 Manual de usuario

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manual de usuario

Espressif Systems

Espressif Systems ESP8266EX Instrucciones de funcionamiento

Abov

Abov AC33M8128L Manual de usuario

Laird

Laird BL654PA Manual de usuario