Speco O4B7 Manual de usuario
Quick Start Guide
4MP Fixed Lens Bullet IP Camera
O4B7
Version 1.2.0
i
Welcome
Thank you for purchasing this network camera!
This owner’s manual is designed to be a reference tool for your system.
Please read this manual carefully before operating the unit and retain it for future reference.
Should you require any technical assistance, please contact Speco Technologies Technical Support.
ii
Important Safeguards and Warnings
1．Electrical safety
All installation and operation here should conform to local electrical safety codes.
Use a certified/listed 12VDC Class 2 power supply only.
Please note: Do not connect two power supplying sources to the device at the same time; it may
result in device damage! The product must be grounded to reduce the risk of electric shock.
Improper handling and/or installation could run the risk of fire or electrical shock.
2．Environment
Heavy stress, violent vibration or exposure to water is not allowed during transportation, storage
and installation.
This product should be installed in a cool, dry place away from direct sunlight and heat sources.
Do not install the product in extreme temperature conditions.
Do not expose the camera to electromagnetic radiation. Otherwise it may result in CMOS sensor
failure.
Do not block any ventilation openings.
Do not allow water and liquid intrusion into the camera.
3. Operation and Daily Maintenance
Please shut down the device and then unplug the power cable before you begin any maintenance
work.
Do not touch the CMOS sensor optic component. You can use a blower to clean the dust on the
lens surface.
Always use the dry soft cloth to clean the device. If there is too much dust, use a cloth dampened
with a small quantity of neutral detergent. Finally use the dry cloth to clean the device.
Please use a professional optical cleaning method to clean the enclosure. Improper enclosure
cleaning (such as using cloth) may result in poor IR functionality and/or IR reflection.
The grounding holes of the product are recommended to be grounded to further enhance the
reliability of the camera.
iii
Warning
This camera should be installed by qualified personnel only.
All the examination and repair work should be done by qualified personnel.
Any unauthorized changes or modifications could void the warranty.
Statement
This guide is for reference only.
Product, manuals and specifications may be modified without prior notice. Speco Technologies
reserves the right to modify these without notice and without incurring any obligation.
Speco Technologies is not liable for any loss caused by improper operation.
Note:
Before installation, check the package and make sure that all components are included.
Contact your rep or Speco customer service department immediately if something is broken or
missing in the package.
Accessory Name
Amount
Network Camera Unit
1
Quick Start Guide
1
Installation Accessories Bag
1
CD
1
iv
Table of Contents
1Physical Specifications .........................................................................................................1
1.1 Device External Cable ......................................................................................................................... 1
1.2 Dimensions......................................................................................................................................... 1
2Device Installation ...............................................................................................................2
3IP Scanner ...........................................................................................................................4
3.1 Operation ........................................................................................................................................... 4
4Web Operation....................................................................................................................5
4.1 Login and Main Interface .................................................................................................................... 5
1
1Physical Specifications
1.1 Device External Cable
You can refer to the following figure for cable information. See Figure 1-1.
Figure 1-1
Please refer to the following table for detailed information.
No.
Port name
Function description
1
Ethernet port
Network data in/out and PoE
2
DC power
jack
Connect to DC 12V power
1.2 Dimensions
Please refer to Figure 1-2 for device dimension.
Figure 1-2
2
2Device Installation
Note:
Before installation, please make sure the installation surface can support a minimum of
3 times the weight of the camera
Figure 2-1
Please see Figure 2-1 and Figure 2-2.
Step 1
Dig holes on the installation surface (wall or ceiling).
Step 2
Take out the expansion bolts from the accessories bag and insert them into the holes.
Step 3
Take out the installation screws. Tighten the screws to fix the device on the surface. Adjust
the sunshield and tighten the screw.
Step 4
Plug external wiring of the device properly.
3
Figure 2-2
Step 5
Use the screwdriver (in accessories bag) to loosen adjusting screw.
Step 6
Adjust the device in all possible directions, and set its monitoring direction according to the
requirements.
Step 7
Use the screwdriver to tighten the adjusting screws.
4
3IP Scanner
IP Scanner can search for the device on the local network.
Please note that only devices that are on the same subnet can be discovered.
3.1 Operation
Open up IP Scanner.
Figure 3-1
In the device list, you can view the IP address, model number, and MAC address of each
device. Select the applicable device and double click to open up the web viewer.
Figure 3-1
5
4Web Operation
This device supports viewing and management via a web browser on a PC.
4.1 Login and Main Interface
Open the browser and input network camera address in the address bar or double click the
device in IP Scanner. See Figure 4- 1.
Figure 4- 1 IP address
The login interface is shown as below. See Figure 4- 2.
Please input your user name and password.
Default user name is admin and password is 1234.
Note: For security purposes, please change the password after initial login.
Figure 4- 2 Web login
After logging in, follow directions to install applicable plugins.
Input your IP
address here
Tabla de contenidos
Otros manuales de Cámara de seguridad de Speco
Speco
Speco CILT13D1G Manual de usuario
Speco
Speco O2D60M Manual de usuario
Speco
Speco CVC-3805 Manual de usuario
Speco
Speco OIPC72B7G Manual de usuario
Speco
Speco CVC61iLTB Manual de usuario
Speco
Speco Bullet2 HT-INTB4 Manual de usuario
Speco
Speco O5T2 Manual de usuario
Speco
Speco HT5943T Manual de usuario
Speco
Speco O4FT2W Manual de usuario
Speco
Speco HTFD4T Manual de instalación
Speco
Speco o2vld5 Manual de usuario
Speco
Speco HTINT58K Manual de usuario
Speco
Speco O8VLD1 Manual de usuario
Speco
Speco CVC-5735DNV Manual de usuario
Speco
Speco HT-7246IHR Manual de usuario
Speco
Speco O8FT1 Manual de usuario
Speco
Speco O2D5M Manual de usuario
Speco
Speco CCLR13D1G Manual de usuario
Speco
Speco O4VT1 Manual de usuario
Speco
Speco O4B9 Manual de usuario
