Speco O2P25X Manual de usuario

Quick Start Guide

O2P25X

Welcome

Thank you for purchasing this PTZ camera!

This owner's manual is designed to be a reference tool for your system.

Please read this manual carefully before operating the unit and retain it for future reference.

Should you require any technical assistance, contact Speco Technologies Tech Support at

1-800-645-5516

1. Electrical safety

All installation and operation here should conform to local electrical safety codes.

Use a certified/listed 24VDC/AC power supply only.

Please note: Do not connect two power supplying sources to the device at the same time;

it may result in device damage! The product must be grounded to reduce the risk of

electric shock.

Improper handling and/or installation could run the risk of fire or electrical shock.

2. Environment

Heavy stress, violent vibration or exposure to water is not allowed during transportation,

storage and installation.

This product should be installed in a cool, dry place away from direct sunlight and heat

sources.

Do not install the product in extreme temperature conditions.

Do not expose the camera to electromagnetic radiation. Otherwise it may result in CMOS

sensor failure.

Do not block any ventilation openings.

Do not allow water and liquid intrusion into the camera.

3. Operation and Daily Maintenance

Please shut down the device and then unplug the power cable before you begin any

maintenance work.

Do not touch the CMOS sensor optic component. You can use a blower to clean the dust on

the lens surface.

Always use the dry soft cloth to clean the device. If there is too much dust, use a cloth

Important Safeguards and Warning

Warning

Statement

This camera should be installed by qualified personnel only.

All the examination and repair work should be done by qualified personnel.

Any unauthorized changes or modifications could void the warranty.

This guide is for reference only.

Product, manuals and specifications may be modified without prior notice. Speco

Technologies reserves the right to modify these without notice and without incurring

any obligation.

Speco Technologies is not liable for any loss caused by improper operation.

Note:

Before installation, check the package and make sure that all components are included.

Contact your rep or Speco customer service department immediately if something is

broken or missing in the package.

dampened with a small quantity of neutral detergent. Finally use the dry cloth to clean

the device.

Please use a professional optical cleaning method to clean the enclosure. Improper enclosure

cleaning (such as using cloth) may result in poor IR functionality and/or IR reflection.

The grounding holes of the product are recommended to be grounded to further enhance

the reliability of the camera.

Overview

3 Overview

Cable Connection

1 Ethernet connector

3 Safety wire

Power connector

Network Cable

DC12V

Installation

► Connecting Network Cable

① Loosen the nut from the main element.

② Run the network cable (without RJ 45 connector) through the

both elements. Then crimp the cable with RJ 45 connector.

③ Connect the cable to the water-proof connector. Then tighten the

nut and the main cover.

Please make sure the wall is strong enough to bear the dome

camera’s weigh and the camera is powered off during

installation.

This PTZ camera supports wall or ceiling mounting. Please select

a way to install as needed. The following instructions are for

reference only.

Micro SD Card Installation

Insert a micro

SD card

1. Loosen the four screws of

the cover and then remove

the cover.

2. Insert a micro SD card as indicated

above and then install the cover back.

Wall Mounting

1. Pull the cables through the

bracket.

2. Secure the PTZ camera to the

bracket with screws.

3. Drill the screw holes on the wall

according to the drill template. Then

insert the plastic plugs into the holes.

4. Insert two screws to the holes

as indicated by the arrows (left)

and leave 12mm clearance.

5. Connect the cables and then

hang the bracket on the wall.

6. Attach the bracket to the wall

with four screws.

③ In the device list, you can view the IP address, model number, and

MAC address of each device. Select the applicable device and double

click to open up the web viewer. You can also manually enter the IP

address in the address bar of the web browser (Internet Explorer 8

and up).

5C :F2:0 7: 24:68 :B9

O2 P25X

The login interface is shown above. Default user name is admin and

password is 1234. After logging in, follow directions to install

applicable plugins.

Web Operation and Login

● Operation

IP Scanner can search for the device on the local network.

① Make sure that the camera and the PC are connected to the same

local network. The camera is set to DHCP by default.

② Install IP Scanner from the CD and run it after installation.

Otros manuales para O2P25X

Tabla de contenidos

Otros manuales de Cámara de seguridad de Speco

Speco

Speco VL647iLT Manual de usuario

Speco

Speco O4FB8M Manual de usuario

Speco

Speco O8VT1 Manual de usuario

Speco

Speco PROVIDEO CVC-620WP Manual de usuario

Speco

Speco O8FT1M Manual de usuario

Speco

Speco LPRD922 Manual de usuario

Speco

Speco HT-7715DNV Manual de usuario

Speco

Speco HTFB2TM Manual de usuario

Speco

Speco O5T2 Manual de usuario

Speco

Speco O2P25X Manual de usuario

Speco

Speco O2VB1N Manual de usuario

Speco

Speco CVC-680CD Manual de usuario

Speco

Speco O2iD9 Manual de usuario

Speco

Speco VL-183 Manual de usuario

Speco

Speco HT7040H Manual de usuario

Speco

Speco CVC-320WP Manual de usuario

Speco

Speco CVC-635CR Manual de usuario

Speco

Speco WC-2503 Manual de usuario

Speco

Speco HTINTT5H Manual de usuario

Speco

Speco O5D2M Manual de usuario

Speco

Speco VL-262SD Manual de usuario

Speco

Speco O4LB1 Manual de usuario

Speco

Speco CVC71HRB Manual de usuario

Speco

Speco O4D6WM Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario