Specialized Speedzone Pro Cyclocomputer Manual de usuario

Congratulations on your purchase and welcome to the growing number of cyclists who are

discovering a powerful new generation of bicycle computers. Your Specialized

SpeedZone® Team has been designed to provide the best combination of performance,

features, durability and ease of use and installation.

The following functions available on your

SpeedZone®Team bicycle computer:

SPD - Current Speed

AVS - Average speed

MXS - Maximum Speed

ATM - Automatic Start/Stop Timer

DST - Trip Distance

ODO - Odometer (total distance)

ASI - +/- Average Speed Indicator

TM - Stopwatch

Digital 12/24 Hour Clock

Analog Clock

This computer also features:

• Easy Calibration Mode • Second Wheel Option

• Wireless Mounting System • Water Resistant Housing

• Triple Display LCD • 2 Year Warranty

• Backlit LCD display. • Sleep Mode after one-hour inactivity

to preserve battery life

2 3

What is included in you SpeedZone® Team

package:

1. SpeedZone® Team Computer (1)

2. Mounting bracket (2)

3. Magnet with screw (1)

4. Cable tie wraps (4)

5. Mounting bracket sizing straps (3)

6. Transmitter (1)

7. Transmitter mounting bracket (1)

Mounting the SpeedZone® Team:

The SpeedZone® Team Wireless transmitter can

mount on the right or the left side of the fork blade.

The right side should be used on large frames or

when a suspension fork is installed. The optimal dis-

tance between the computer and the transmitter is 24

inches (610mm) The distance may need to be less that

24 inches (610mm) if ambient temperatures are

below 40 °F (4 °C). To reduce signal loss in colder

temperatures, the transmitter should be mounted as

close to the computer as possible. (maximum mount-

ing distance is 28 inches). Use the transmitter mount-

ing bracket and tie-wraps provided to position the sen-

sor. Do not tighten the tie-wraps until final placement

of the magnet is correct. See figure 1.

Attach the magnet to a spoke across from

the transmitter with the magnet screw. The

clearance between the magnet and the

transmitter should be approximately 1/32”-

1/16” (1-2mm). Tighten the magnet and

transmitter. Do not over-tighten the magnet

screw See figure 2.

Attach the mount to the handlebar using the

bracket screw provided. Tighten so that the

bracket cannot rotate on the handlebar.

There are several sizing straps provided to fit

different diameter bars See figure 3.

the computer forward onto the mounting

until it ‘snaps’ into place with an audible

click. To remove the computer, push it back-

ward until it releases from the mount. To test

for proper installation of the magnet, trans-

mitter and computer, activate the computer

by pushing the ‘MODE’ (right side) button

and pick up the front of the bicycle and

spin the wheel. The “wheel option” indica-

tor will flash. If it does not flash, check the

sensor and magnet alignment. Realign as

necessary until the “wheel option” indicator

flashes while spinning the wheel.

fig.1 fig.2

24in.

max

1-2mm

fig.3

4 5

Programming:

Programming the functions of your

SpeedZone® Team requires it to be placed

in various “modes” (i.e. odometer mode,

distance mode). The computer can be

cycled through these modes by pressing the

“MODE” button located on the right-hand

side of the housing. Once a specific mode

has been entered, its values can be reset or

adjusted by pressing either the “FUNC-

TION” button located on the left hand side

of the housing or by using a combination of

the “MODE” and “FUNCTION” buttons.

1. Miles or Kilometers selection:

Your SpeedZone® Team will record speed

and distance in either miles (M/h) or kilo-

meters (KM/h). To enter your selection of

miles or kilometers, push the “MODE” but-

ton until ODO (odometer) appears in the

lower left side of the display (This is called

the odometer mode). Hold down the

“FUNCTION” (left side) button and ‘tap’ the

“MODE” button once. The Km/h, m/h indi-

cator will begin blinking. You may now

alternate between miles and kilometers by

pressing the “MODE” button. When the

correct choice is flashing, select it by press-

ing the “FUNCTION” button. You will now

enter the “Programmable Odometer” mode.

If the odometer setting is correct push the

“FUNCTION” button (5 times) to exit to

odometer mode (otherwise, see “Setting the

programmable odometer below).

2. Setting the

Programmable

Odometer:

The programmable

odometer mode is

accessed by enter-

ing the odometer (ODO) mode and holding

down the “FUNCTION” button and ‘tap-

ping’ the “MODE” button once. The Km/h

indicator will flash. If the Km/h setting is

correct press the “FUNCTION” button once

and a five digit number will appear. You

are now in the programmable odometer

mode. This mode is useful if you have

replaced the battery and would like to

retain the mileage you have already rid-

den. To enter a mileage into the odometer,

press the “MODE” button until the flashing

digit is correct. (Note: The “MODE” button

may be held to scroll to the correct digit.)

Press the “FUNCTION” button to select the

next digit to the right. Repeat the process

until all five digits are entered as your exist-

ing mileage.

3. Wheel Circumference Selection:

To set the circumference for the type of tires

you are using, you can use Specialized’s

exclusive “Easy Calibration Mode” or mea-

sure your actual tire circumference by the

roll-out method. Two different tire diameters

may be entered into the computer’s

“Second Wheel Option.”

Easy Calibration Mode:

Your SpeedZone® Team has been prepro-

grammed with the following 14

Specialized tire sizes:

•26 X 1.0 •26 X 1.25 •26 X 1.5

•26 X 1.75 •26 X 1.9 •26 X 2.0

•26 X 2.1 •26 X 2.2 •650 X 20

•700c X 20 •700c X 23 •700c X 26

•700c X 32 •700c X 38

When using Easy Calibration Mode, the

SpeedZone® will dis-

play the tire size on

it’s LCD display

screen. (see figure 6)

The Easy Calibration

Mode is accessed by

entering the odometer (ODO)

mode and holding down the

“FUNCTION” button for three seconds.

The display will now show the currently

selected tire size for wheel option #1.

To scroll through the preprogrammed tire

sizes tap both the “MODE” and “FUNC-

TION” buttons simultaneously. When you

reach the desired tire size press the

“FUNCTION” button once to select it and

enter Easy Calibration Mode for wheel

option #2. Follow the same procedure to

program the wheel #2 tire size and tap the

“FUNCTION” button to exit to odometer

mode.

fig.6

6 7

Roll Out Method

The roll out method will provide the most

accurate computer calibration and can take

into account variables such as inflation pres-

sure, rim width and rider weight.

1. Extend a tape measure out to 3000mm

(120 inches) and lock it in place.

2. With your tire inflated to its proper pres-

sure, place the valve at the 6:00 position (at

the bottom) directly over the start of the mea-

suring tape.

3. Roll the wheel one complete revolution until

the valve stem is again at the 6:00 position.

Read thetape directly under the valve and

note the distance in millimeters. (To convert

inches to millimeters, multiply inches by 25.4).

Use this number to replace the default

(default values are 2054 for wheel one, and

2113 for wheel two) when programming

your computer.

You may also use

the following

quick

reference chart:

Generic Tire Size Chart

This chart is for non-Specialized tires

26 X 1.75 2140

26 X 2.0 2074

26 X 2.1 2090

650C X 20 1945

700C X 26 2124

700C X 38 2170

Programming in the circumference:

To enter the tire circumference number,

enter the odometer (ODO) mode by hold-

ing down the “FUNCTION” button for

three seconds. The display will now show

the currently selected tire size for wheel

option #1. If necessary scroll through the

preprogrammed tire sizes by tapping both

the “MODE” and “FUNCTION” buttons

simultaneously until the display shows a

four digit number. This number represents

your tire circumference in millimeters. Press

the “MODE” button

until the flashing

digit is correct.

(Note: The “MODE”

button may be held

to scroll to the correct digit.) Press the

“FUNCTION” button to select the next digit

to the right. Repeat the process until all four

digits are entered as your tire circumfer-

ence. Press the “FUNCTION” button once

to select it and enter the circumference for

wheel option #2. Follow the same proce-

dure to program the wheel #2 tire size

and tap the “FUNCTION” button to exit to

odometer mode.

4. Setting the Clock

Your SpeedZone® Team features two

clocks, one analog and one digital. The

hands of the analog clock will be set auto-

matically to correspond to the digital one.

To access the “clock mode” press and hold

the “MODE” button for three seconds. To

set the clock, press the “FUNCTION” but-

ton for three seconds. The display will flash

either twelve (12:) or twenty four (24:).

Select between 12: or 24: mode by press-

ing the “MODE” button. Press the “FUNC-

TION” button to set the mode.

The hour digit will now begin flashing .

Press the “MODE” button to adjust the hour

digits and press the “FUNCTION” button

to set. The minutes will flash and can be

adjusted by pressing the “MODE” button.

(hold the “MODE” button to scroll through

the digits quickly) Press the “FUNCTION”

button to set the minutes and return to clock

mode

Note: The minute-hand of the analog

clock has twelve segments and can only

display time in five minute increments. The

hand will not jump to the next segment

until the digital clock reaches whole five

minute intervals. (e.g. 12:05, 12:10,

12:15 etc.)

5. Timer

Selection

The timer can be

selected for either

Automatic Timer

Mode (ATM) or

Timer Mode (TM). The ATM selection

Roll Forward

Stem

Wheel

Circumference

8 9

allows you to keep track of your actual rid-

ing time. The timer

only operates when

the wheel is rotating

and cannot be

turned on or off man-

ually.

The TM selection is just like a conventional

stopwatch. The timer is activated manually

and records the time whether the wheel is

rotating or not. Tapping the “FUNCTION”

button starts and stops the stopwatch and

holding the “FUNCTION” button for three

seconds will reset to stopwatch.

Note: The average speed (AVS) will be

calculated differently based upon the selec-

tion of ATM or TM. If ATM is selected,

the AVS is based upon only riding time.

If TM is selected the AVS is based on the

total time the stopwatch is turned on or

activated.

To select between ATM and TM press and

hold the “FUNCTION” and tap the

“MODE” button. Either ATM or TM will

flash. Press the “MODE” button to select

between the two modes and press “FUNC-

TION” to return to normal operating mode.

Computer Functions

Speedometer- Speed is always indicated

on the top line of the screen. The speed is

shown continuously up to 99.9M/h (99.9

Km/h) with a resolution of 0.1 M/h (0.1

Km/h)

Average Speed (AVS)- The average

speed is displayed on the lower line of the

screen when AVS is shown on the left. The

average speed is based upon whether the

ATM or the TM mode has been selected,

the resolution of the average speed is

shown in 0.1M/h or Km/h increments.

+/- Average Speed Indicator- An up

or down arrow

displayed in the

upper right side of

the screen shows

whether the cur-

rent speed is above or below the average

speed. The arrow is always displayed so

you know if you’re maintaining your aver-

age speed while in another mode.

Maximum

Speed (MXS)-

The maximum is

displayed on the

lower line of the

screen when MXS is shown on the left. The

maximum speed is retained in memory and

updated when a higher speed is attained.

The maximum speed can be reset by press-

ing the “FUNCTION” button for three sec-

onds.

Auto

Start/Stop

Timer (ATM)-

The stop watch

function will operate only when there is

speed input and records the actual time

spent riding. Pressing the “FUNCTION” key

for 3 seconds will reset the ATM display to

zero.

Timer Mode

(TM)- In TM mode

the stopwatch func-

tion will operate when the “FUNCTION”

button is pressed. The stopwatch will record

the total time after the button is pressed

regardless of whether there is speed input or

not. The average speed (AVS) will be calculat-

ed based on the time the timer mode is acti-

vated.

Trip Distance (DST)- Trip distance mode

will record up to 999.99 miles or kilometers

and then roll to zero. The trip distance func-

tion can be reset

by pressing the

“FUNCTION” but-

ton for three sec-

onds. The resolu-

tion is 0.01 miles

(0.01Kilometers). The trip distance is shown

on the lower line of the screen.

10 11

Odometer (ODO)- The odometer will

record the total distance traveled up to

99,999 miles or kilometers and then roll to

zero. The odometer can be reset by press-

ing the “FUNC-

TION” button for

three seconds.

The total distance

is shown on the

lower line of the

screen.

Programmable Odometer- The

odometer digits are user setable. This is

convenient for transferring your hard-earned

mileage that is usually lost when changing

batteries or computers.

Clock- The SpeedZone® Team has two

clocks, one digital and one analog. The

digital clock is accessed by pressing the

“MODE” button for three seconds. There is

an option of either 12 hour or 24 hour

clock settings and is shown on the lower

line of the screen. The analog clock is

always displayed in the upper right side of

the screen. The minute-hand of the analog

clock has twelve segments and can only

display time in five minute increments. The

hand will not jump to the next segment until

the digital clock reaches whole five minute

intervals.

Second Wheel Mode- For riders who

own more than one bicycle or who fre-

quently change tires, the SpeedZone®

Team is capable of storing two tire sizes.

You can change between the two sized by

pressing both the “MODE” and “FUNC-

TION” buttons simultaneously for three sec-

onds. The second wheel mode indicator

will change from 1 to 2. Mileage recorded

will be cumulative between the two sizes.

(an accessory handlebar mount is available

from your Specialized dealer)

Backlight- The backlight feature of your

SpeedZone® Team is activated by pressing

the “BACKLIGHT” button on the top of the

computer. When pressed the backlight will

remain on for 5 seconds. During this time

the current-speed display will be frozen,

however the SpeedZone® Team will con-

tinue to monitor time and distance functions.

Triple Display LCD- The display screen

on your SpeedZone® Team can provide

three pieces of information simultaneously:

Current Speed (always displayed on the top

line of the screen), Current Time (on analog

clock),and your choice of one of the follow-

ing: Average Speed, Maximum Speed,

Current Time (digital clock), Trip Distance or

Odometer.

Installing the Battery-

Your SpeedZone® Team Computer comes

with the battery installed at the factory.

Should you need to replace the battery,

push the computer backwards to remove it

from the handlebar mount. Before removing

the battery make a note of your odometer

reading and wheel circumference settings

so that you can re-enter them when you

restart the computer. Turn the computer over

so the display is facing downward. Use a

coin to unthread the battery cap from the

computer. Install the battery (model

CR2032) with the positive pole (+) facing

upward. Carefully thread the battery cap

back onto the case with a coin.

(See Figure 7)

If the LCD display is

blank or shows

incomplete digits, turn

the computer over

and press the “AC”

button on the bottom

of the case with the

tip of a pen or a paper clip. This will clear

all the data and re-start the computer.

Reinstall the computer by pushing it forward

into the mount until it snaps into place.

The Transmitter battery can be replaced by

using a small coin to unthread the battery

cap from the transmitter, replacing the bat-

tery (model 23A) and carefully threading

the battery cap back into place.

fig.7

12 13

Troubleshooting:

Display is blank: Change the battery

or press the AC button on the bottom of

the case

Display shows partial digits: Press

the AC button on the bottom of the case.

Speed/distance not recording:

Check transmitter/magnet alignment.

Make sure that the transmitter is no more

than 28 inches from the battery (move

the transmitter as close to the computer

as possible).l

Entire screen is dark: Did you leave

the bike parked in the hot direct sun

when it was parked? If so, move the bike

to the shade. The data will be OK.

Computer moves on handlebar:

Tighten mount or add sizing straps to

improve fit on handlebar.

Important!

Pay attention to traffic and road condi-

tions at all times. Your first obligation is

to be attentive and to ride safely.

• Keep your computer in good shape

and use it safely:

• Do not expose it to direct sunlight

except when you are riding

• Do not disassemble it

• Make sure the magnet and the

transmitter are well aligned. Check them

regularly.

• Keep the computer and all of its com-

ponents tightly attached, and check them

regularly. If any of the components come

loose, it could become tangled in your

spokes and cause an accident.

• See your authorized Specialized deal-

er if you have any trouble installing or

maintaining your computer.

• Clean the unit with a mild detergent

and a soft dry cloth. Never use any kind

of solvent or alcohol.

• The SpeedZone® Team computer is

intended for use on bicycles only and

should not be used on any motorized

vehicle.

Warranty Information:

Specialized cycling computers are guaran-

teed to be free from defects in materials

and/or workmanship (excluding battery) for

a period of two years from the date of pur-

chase. Specialized will at its option, repair

or replace your defective computer.

To receive warranty service send the unit, a

copy of the sales receipt and a brief

description of the problem to:

Specialized Bicycle Components Inc.

15130 Concord Circle

Morgan Hill, CA. 95037

Attn: Product Services/Computer

Warranty

Specifications:

Current Speed: 0.0 to 99.9 MPH

0.0 to 99.9 Km/H

Average Speed 0.0 to 199.9 MPH

(AVS) 0.0 to 199.9 Km/H

Maximum Speed 0.0 to 199.9 MPH

(MXS) 0.0 to 199.9Km/H

Stopwatch 0 to 9hrs, 59min,

(TM) 59sec. recycling type

Automatic Timer 0 to 9hrs, 59min, )

(ATM) 59sec. recycling type

Trip Distance 0 to 999.99 miles or Km

(DST)

Odometer 0 to 99,999 miles or Km

(ODO)

Operating Temp 40°F to 104°F

(4°C to 40°C)

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios para bicicletas de Specialized

Specialized

Specialized SpeedZone Pro Manual de usuario

Specialized

Specialized Globe Throttle Manual de usuario

Specialized

Specialized Command Post Adjustable Height Seat Post Manual de usuario

Specialized

Specialized FireBalls Comp Manual de usuario

Specialized

Specialized Roval Rapide Wheelset None Manual de usuario

Specialized

Specialized SPEEDZONE SPORT CYCLOCOMPUTER Manual de usuario

Specialized

Specialized Stumpjumper Adjustable Dropout Manual de usuario

Specialized

Specialized SpeedZone Manual de usuario

Specialized

Specialized Turbo Pro 23A Manual de usuario

Specialized

Specialized SpeedZone Sport Manual de usuario

Specialized

Specialized SpeedZone Sport Bicycle Manual de usuario

Specialized

Specialized SpeedZone Manual de usuario

Specialized

Specialized SPEEDZONE SPORT DOUBLE WIRELESS Manual de usuario

Specialized

Specialized HPRT-0027 Manual de usuario

Specialized

Specialized Turbo Comp Manual de usuario

Specialized

Specialized Speedzone Sport CR2032 Manual de usuario

Specialized

Specialized Turbo Elite Manual de usuario

Specialized

Specialized AFR Rear Shock EPA Manual de usuario

Specialized

Specialized Rockhopper Adjustable Dropout RH Dropout Manual de usuario

Specialized

Specialized S-WORKS CARBON HARDTAIL Manual

Specialized

Specialized AFR E100 Manual de usuario

Specialized

Specialized SpeedZone Elite Manual de usuario

Specialized

Specialized Speedzone Comp Manual de usuario

Specialized

Specialized SPEEDZONE II Manual de usuario

Manuales populares de Accesorios para bicicletas de otras marcas

Sigma

Sigma BC 16.16 Manual de usuario

Playcore

Playcore Dero Setbacks Manual de usuario

VDO Cyclecomputing

VDO Cyclecomputing x3dw Manual de usuario

Cateye

Cateye RAPID X2 Manual de usuario

buratti meccanica

buratti meccanica Clorofilla Trail Manual de usuario

Shimano

Shimano SG-8R20 Instrucciones de funcionamiento

BOB

BOB YAK Manual de usuario

APLIC

APLIC 303303/20190717TW012 Manual de usuario

SRAM

SRAM AXS BlipBox Manual de usuario

Garmin

Garmin EDGE 500 Manual de usuario

Shimano

Shimano FD-RX810 Manual de usuario

Cateye

Cateye V2C - Manual de instrucciones

KMART

KMART 43115907 Manual de usuario

SIGMA SPORT

SIGMA SPORT Buster 2000 Manual de usuario

NVO Components

NVO Components STEM Manual de usuario

DAXYS

DAXYS BP188 Manual de usuario

XLC

XLC BV-W17 Manual de usuario

Deda Elementi

Deda Elementi SUPERBOX Manual de usuario