SPE MARPO Dredger Manual de usuario
MARPO_Dredger
Version 9.16.1
Instruction Manual
SPE GMBH &CO. KG
Dredge Control
Survey
Engineering
Ritscherstraße 5, 21244 Buchholz, Tel.: +49 40-390 63 55, Fax: +49 40-390 63 36, info@spe-electronics.de, www.spe-electronics.de
Hamburg office: Klopstockstr. 11-13, 22765 Hamburg
Document version created on: 25. June 2019
MARPO_Dredger instruction manual
Contents
1PRELIMINARY REMARKS ..............................................................................1
2OVERVIEW...................................................................................................2
3PLAN VIEW ..................................................................................................3
3.1 Colour scale Mining depth............................................................................5
3.2 Depth display echo sounder.........................................................................5
3.3 Position symbols...........................................................................................5
3.4 Data Display Mode .......................................................................................5
3.5 Compass........................................................................................................5
3.6 Colour scale Terrain model...........................................................................6
3.7 Scale..............................................................................................................7
3.8 Mining Thickness mode................................................................................7
3.9 Grid Coordinate Mode..................................................................................9
3.10 Box Cut mode (optional).............................................................................10
3.11 Data display mode: mining, sounder data, origin ......................................12
4PROFILE VIEW............................................................................................ 13
4.1 Depth scale .................................................................................................14
4.2 Auxiliary line loosening tool depth.............................................................14
4.3 Orientation arrows .....................................................................................15
4.4 Box Cut Line (optional) ...............................................................................15
4.5 Target horizon ............................................................................................15
4.6 Sounder line................................................................................................15
5MENU BAR ................................................................................................ 16
5.1 Water level display .....................................................................................17
5.2 Status display..............................................................................................17
5.3 Save mode ..................................................................................................18
5.4 Zoom function ............................................................................................18
5.5 Menu for plan view ....................................................................................19
5.5.1 Plan up ................................................................................................20
5.5.2 View ....................................................................................................20
5.6 Menu for profile view.................................................................................21
5.7 Project menu ..............................................................................................25
5.7.1 Select project ......................................................................................26
5.7.2 Import data.........................................................................................28
5.7.3 Export data .........................................................................................29
5.8 Auxiliary menu............................................................................................31
5.8.1 MARPO_Monitor ................................................................................33
5.9 Status bar....................................................................................................34
MARPO_Dredger instruction manual
5.10 Full screen mode ........................................................................................34
5.11 Additional functions ...................................................................................35
5.11.1 Plan .....................................................................................................36
5.11.2 DXF/DWG............................................................................................41
5.11.3 Marks ..................................................................................................42
5.11.4 GeoTif..................................................................................................44
5.11.5 Service.................................................................................................44
5.11.6 Survey .................................................................................................44
5.11.7 Status ..................................................................................................44
5.11.8 Target Offset.......................................................................................45
5.11.9 Execute................................................................................................45
5.11.10 MiningCourse..................................................................................46
6USER ACCOUNT CONTROL.................. FEHLER! TEXTMARKE NICHT DEFINIERT.
7TROUBLESHOOTING................................................................................... 49
7.1 Echo sounder line shows distinctive jagged outliers..................................49
7.2 Overview of error messages.......................................................................51
Preliminary remarks
MARPO_Dredger instruction manual
1
1PRELIMINARY REMARKS
The software MARPO_Dredger is part of the MARPO_DGPS_K extraction monitoring
system. It is able to display and save positions and extraction depths of the excavation
tool of a dredger during the dredging process in a mining area.
This instruction manual describes the operation and function of MARPO_Dredger.
The different display options are explained by the help of screenshots.
The use of this software does not prevent wrong excavation processes…
Overview
MARPO_Dredger instruction manual
2
2OVERVIEW
Plan view
page 3
Profile view
page 13
Navigation bar
page 16
Status display
page 17
Zoom function
page 18
Menu for the Plan view
page 19
Menu für die Profile view (Cut)
page 21
Project menu
page 25
Auxiliary menu
page 31
Status bar
page 34
Additional functions (.Set.Funct.)
page 35
Plan View
MARPO_Dredger instruction manual
3
3PLAN VIEW
The upper part of the screen is called the plan view. It contains the digital terrain model
(DTM), which is created by using survey data, approval limits and a digital dredger model.
The plan view is a flexible 3D-visualisation, which allows the user to get a preferably
flexible and individual observation of the mining area. Center of this view is always the
loosening tool.
By default, the plan view starts in Terrain mode, in which the colour rendering refers to
the existing depth. In other modes certain display styles are changing. This chapter refers
to the default setting Terrain. The different views are described in the following sections
in detail.
Plan View
MARPO_Dredger instruction manual
4
In the following figure, the main components of the plan view are marked with numbers
and listed in the table below.
Colour scale Mining depth
Page 5
Depth display Echo sounder
Page 5
Position symbols
Page 5
Data display mode
Page 5
Compass
Page 5
Colour scale Terrain model
Page 6
Scale
Page 7
Plan View
MARPO_Dredger instruction manual
5
3.1 Colour scale Mining depth
The colour scale refers to the current distance in
meters to the target horizon (excavation limit). Above
the target horizon, the status is displayed in green and
below in red. The adjustment of the colours is
described in section 3.8.
The coloured field on the righthand side in the status
display shows the current status. (Dark green here, i.e.
> 1 m distance to the target horizon).
3.2 Depth display echo sounder
Measured depth of the echo sounder.
3.3 Position symbols
Position of the loosening tool (excavation point)
Position of the DGPS receiver
Position of the echo sounder scanner (if used)
3.4 Data Display Mode
The terrain model shows the mining data.
The terrain model shows the echo sounder data.
The terrain model does not show any stored data. It shows
the DTM as it was originally.
The data display mode can be changed by klicking on the respective view button several
times (see section 5.5.2).
3.5 Compass
The compass shows the direction of the map (yellow long line) and the
direction of the dredger (short white line).
Here the map is oriented to the south and the dredger to the southwest.
Plan View
MARPO_Dredger instruction manual
6
3.6 Colour scale Terrain model
The colour scale is used as a visual tool to quickly distinguish between different depth
zones.
In the Terrain view, the DTM is displayed in different colours with
reference to the height values. The red line below the value "0.00"
symbolises the water level. The depth is indicated with a negative value
downwards. The scaling can also be changed to meter NHN via Project
Settings DGM Allgemein using the button Under W.L.
The colour scale can be individually adjusted. By clicking with the right
mouse button or tapping with the finger on the scale, the following menu
opens.
The value Upper (here: 1.30 m) is the maximum height outside the water body in
the terrain model.
Tabla de contenidos
Otros manuales de Equipos de construcción de SPE
