SOYO SY-D6IBA Manual de usuario
SOYO™SY-D6IBA
ii
About This Guide
This User's Guide is for assisting system manufacturers and end users in setting up
and installing the mainboard. Information in this guide has been carefully checked for
reliability; however, no guarantee is given as to the correctness of the contents. The
information in this document is subject to change without notice.
Copyright Notice
Copyright 1998, Soyo Computer Inc. All rights reserved. This manual is copyrighted
by Soyo Computer Inc. You may not reproduce, transmit, transcribe, store in a
retrieval system, or translate into any language, in any form or by any means,
electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of
this publication without express written permission of Soyo Computer Inc.
Trademarks
Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property
of their owners.
Disclaimer
Soyo Computer Inc. makes no representations or warranties regarding the contents
of this manual. We reserve the right to revise the manual or make changes in the
specifications of the product described within it at any time without notice and without
obligation to notify any person of such revision or change. The information contained
in this manual is provided for general use by our customers. Our customers should be
aware that the personal computer field is the subject of many patents. Our customers
should ensure that their use of our products does not infringe upon any patents. It is
the policy of Soyo Computer Inc. to respect the valid patent rights of third parties and
not to infringe upon or assist others to infringe upon such rights.
Restricted Rights Legend
Use, duplication, or disclosure by the Government is subject to restrictions set forth in
subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause
at 252.277-7013.
Product Rights
Products mentioned in this manual are mentioned for identification purpose only.
Product names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies.
If you need any further information, please come to our home page on the Internet.
The address is "http://www.soyo.com.tw".
Edition: September 1998
Version 1.0
D6IBA SERIAL
FC
CTested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
POST CONSUMER
RECYCLED PAPER
100%
Table of Contents SY-D6IBA
iii
Table of Contents
SY-D6IBA MAINBOARD LAYOUT................................................1
CHAPTER 1 INTRODUCTION .....................................................2
1-1 KEY FEATURES.......................................................2
1-2 HANDLING THE MAINBOARD.................................5
1-3 ELECTROSTATIC DISCHARGE PRECAUTIONS.....5
CHAPTER 2 HARDWARE SETUP...............................................6
2-1 PREPARATIONS......................................................6
2-2 UNPACKING THE MAINBOARD...............................7
2-3 INSTALLATION GUIDE.............................................8
CHAPTER 3 BIOS SETUP UTILITY...........................................30
3-1 SOYO COMBO SETUP..........................................32
3-2 STANDARD CMOS SETUP....................................37
3-3 BIOS FEATURES SETUP.......................................40
3-4 CHIPSET FEATURES SETUP................................45
3-5 POWER MANAGEMENT SETUP ...........................48
3-6 PNP/PCI CONFIGURATION SETUP.......................52
3-7 LOAD SETUP DEFAULTS......................................55
3-8 INTEGRATED PERIPHERALS ...............................56
3-9 SUPERVISOR PASSWORD...................................61
3-10 USER PASSWORD ................................................62
3-11 IDE HDD AUTO DETECTION.................................63
CHAPTER 4 DRIVERS INSTALLATION.....................................64
CHAPTER 5 ULTRA-SCSI I/O SUBSYSTEM.............................67
5-1 INTRODUCTION TO ULTRA-SCSI.........................67
5-2 INSTALLING SCSI DEVICES..................................68
5-3 CONNECTING INTERNAL SCSI DEVICES............69
5-4 ADAPTEC RAIDPORT™.........................................70
Mainboard Layout SY-D6IBA
1
SY-D6IBA MAINBOARD LAYOUT
Back Panel SY-D6IBA Platform
COM 1
COM 2
USB 1
PRT
USB 2
PS/2 KB
Connector
PS/2 Mouse
Connector
ISA Slot #1
ISA Slot #2
Intel
82371 EB
Intel
82443 BX
IR1
15
Ultra
I/O Chipset
AGP Slot
ATX
Power
1
FDC
IDE 2
11
DIMM 1
DIMM 2
DIMM 3
DIMM 4
3V
Lithium
Battery
Flash BIOS
PWRBT
HDD LED
Turbo
LED
Reset
_
+
_
+
_
+
_
+
Speaker
Keylock
Power
LED
W83781D
828AC
SB-LINK
(PC-PCI)
JP5
CMOS Clear
Jumper
3
1
JP1
1 3 FAN1FAN2
CPUFAN
1
CPUFAN
1
RAID Port
Ultra-Wide SCSI
Connector (68-pin)
Fast SCSI
Connector (50-pin)
1
1
FAN3
1
IDE 1
PCI Slot #1
PCI Slot #2
PCI Slot #3
PCI Slot #4
adaptec
AIC - 7880P
AQWA741
Hardware Monitoring
(Optional)
(Optional)
(Optional)
(Optional)
Slot 1 #1 for
Pentium
II
processor Slot 1 #2 for
Pentium
II
processor
JP44
WOL
Header
13
Introduction SY-D6IBA
2
Chapter 1
INTRODUCTION
The SY-D6IBA AGP/PCI mainboard is a high-performance, Single
or Dual Pentium®II processor supported, ATX form-factor system
board. SY-D6IBA uses the 82440 BX Chipset technology and
supports most Pentium®
II class processors. This mainboard is fully
compatible with industry standards and adds many technical
enhancements.
1-1 KEY FEATURES
Supports Single or Dual Intel Pentium®
II processors (233-550MHz)
Auto-detect CPU voltage
Soft CPU settings in BIOS with the “SOYO COMBO Setup”
SCSI and RAIDport™onboard (optional)
PC97, ACPI, Ultra DMA/33
Supports system memory up to 1GB (1000 Mbytes)
Power-on by modem or alarm
Supports Wake-On-LAN (WOL)
Supports Power-On by PS/2 keyboard
Supports Creative SB-LINK™(PC-PCI) for PCI audio
Supports onboard hardware monitoring and includes
Hardware Doctor™utility
1 x 32-bit AGP slot
4 x 32-bit bus mastering PCI slots
2 x USB ports onboard
1 x IrDA port
Supports multiple-boot function
DMI utility
ATX power connector
Introduction SY-D6IBA
3
SY-D6IBA PLATFORM FEATURES
Board Size 4-layer PCB, 25x30.5cm (9.8”x 12”),
ATX Form Factor
Slot1 2 x Slot 1 for Pentium®
II Processor
ØSupports Single or Dual Pentium®
II processor
ØSupports the following processors:
lwith 100MHz FSB:
Pentium®
II 350/400/450/500*/550* MHz
lwith 66MHz FSB:
Pentium®
II 233/266/300/333 MHz
* The SY-D6IBA mainboard is specially designed to
support processors with large frequencies of up to
550MHz. Please note that 500/550MHz processors are
not presently available for testing.
ØSupports both boxed and non-boxed type of CPUs
ØIncludes two CPU mount kits with retention clips
(to equip each Dual Pentium®
II processor)
ØAlso includes a CPU heat-sink support stand used
for heavier non-boxed type CPUs
ØFeatures Auto-detection of CPU voltage
Chipset 82440 BX AGP/PCI Set
ATX Power 20-pin Male Connector
FAN1 Slot1 #1 CPU: 3-pin CPU Cooling Fan Connector
FAN2 Slot1 #2 CPU: 3-pin CPU Cooling Fan Connector
FAN3 Chassis Cooling Fan Connector
Memory DIMM Bank (DIMM1~4)
ØFour strips of 168-pin Unbuffered and Registered
SDRAM DIMM
ØSupports 8/16/32/64/128/256MB DIMM modules in
each bank
ØProvides up to 1 Gbytes (1000 MB) of main memory
ØSupports ECC configuration
BIOS System BIOS built-in, Award BIOS
ØAPM, ACPI and "Plug-and-Play" functions
ØSupports multiple-boot function
ØOnboard FLASH memory for easy upgrade
ØDMI utility
Introduction SY-D6IBA
4
Bus Controller Compliant with v2.1 PCI specifications
PCI Slots 4 x 32-bit Bus Mastering Slots
AGP Slot 1 x 32-bit AGP Slot
ISA Slots 2 x 16-bit ISA Slots
IDE1, IDE2 2 x 40-pin Bus Mastering E-IDE/ATAPI Ports
ØIDE1: Primary IDE Device Connector
ØIDE2: Secondary IDE Device Connector
ØSupports Ultra DMA/33
FDC 1 Floppy Disk Drive (FDD) Port
(Supports 1.2MB/1.44MB/2.88MB and LS120/3-mode FDD)
IR 5-pin Serial Infrared Device Header
Keylock 5-pin KeyLock Header
Reset 2-pin Reset Switch Header
Speaker 4-pin PC Speaker Header
TB_LED 2-pin Turbo LED Header
HDD_LED 2-pin IDE Device LED Header
PWRBT ATX Power On/Off Switch 2-pin Header
JP5 CMOS Clear Jumper
JP1 Power-On by PS/2 Keyboard Jumper
JP44 WOL (Wake-On-LAN) 3-pin Header
SBLINK™PCI Audio Card Header, (PC-PCI)
Ultra-Wide SCSI
68-pin Ultra-Wide SCSI Connector onboard (optional)
Fast SCSI 50-pin Fast SCSI Connector onboard (optional)
RAIDport™60-pin Adaptec®
RAIDport™Slot onboard (optional)
SY-D6IBA BACK-PANEL FEATURES
PRT 1 x Onboard 26-pin Female Parallel Printer Port
ØECP/EPP/SPP multi-mode parallel printer port
COM1, COM2 2 x Onboard RS-232 Serial Ports
ØFeature 2 x high-speed UARTs (with 16550 FIFO)
PS/2 KB 1 x Onboard PS/2 Keyboard Connector
PS/2 Mouse 1 x Onboard PS/2 Mouse Connector
USB1, USB2 2 x Onboard USB (Universal Serial Bus) Connectors
Introduction SY-D6IBA
5
1-2 HANDLING THE MAINBOARD
To avoid damage to your mainboard, follow these simple rules while
unpacking:
ØBefore handling the mainboard, ground yourself by grasping an
unpainted portion of the system's metal chassis.
ØRemove the mainboard from its anti-static packaging. Hold the
mainboard by the edges and avoid touching its components.
ØCheck the mainboard for damage. If any chip appears loose,
press carefully to seat it firmly in its socket.
Warning: Do not apply power if the mainboard appears
damaged. If there is damage to the board, contact your
dealer immediately.
1-3 ELECTROSTATIC DISCHARGE PRECAUTIONS
Make sure to ground yourself before handling the mainboard or
other system components. Electrostatic discharge can easily
damage the components. Note that you must take special
precautions when handling the mainboard in dry or air-conditioned
environment.
To protect your equipment from electrostatic discharge, take the
following precautions:
ØDo not remove the anti-static packaging until you are ready to
install.
ØGround yourself before removing any system component from
its protective anti-static packaging. (To ground yourself, grasp
the expansion slot covers or other unpainted portions of the
computer chassis.)
ØFrequently ground yourself while working or use a grounding
strap.
ØHandle the mainboard by its edges and avoid touching its
components.
Hardware Setup SY-D6IBA
6
Chapter 2
HARDWARE SETUP
Congratulations on your purchase of SY-D6IBA Mainboard. You are
about to install and connect your new mainboard.
Note: Do not unpack the mainboard from its protective anti-static
packaging until you have made the following preparations.
2-1 PREPARATIONS
Gather and prepare all the following hardware equipment to
complete the installation successfully:
1. Single or Dual Pentium®
II processor with built-in CPU cooling
fan (boxed type).
Note: This mainboard supports non-boxed type CPUs. The
heavier CPU cooling fan requires the installation of a CPU
support stand included in the mainboard package.
2. DIMM memory module
3. Computer case and chassis with adequate power supply unit
4. Monitor
5. PS/2 Keyboard
6. Pointing Device (PS/2 mouse)
7. Speaker(s) (optional)
8. Disk Drives: HDD, CD-ROM, and Floppy drive…
9. External Peripherals: Printer, Plotter, and Modem (optional)
10. Internal Peripherals: Modem and LAN cards (optional)
11. Internal SCSI Devices: Hard/Floppy/CD-ROM Drives,
Tape Drives, Removable Media Drives, etc. (optional)
Hardware Setup SY-D6IBA
7
2-2 UNPACKING THE MAINBOARD
When unpacking the mainboard, check for the following items:
ØThe SY-D6IBA 82440 BX AGP/PCI Mainboard
ØThe Quick Start Guide *
ØThe Installation CD-ROM *
ØTwo SCSI Driver Installation Diskettes
labeled “7800 Family Manager Set V2.10”(optional)
ØOne IDE Device Flat Cable
ØOne Floppy Disk Drive Flat Cable
ØOne 50-pin Fast SCSI Cable (optional)
ØOne 68-pin Ultra-Wide SCSI Cable (optional)
* If your board comes with a driver disc and a paper manual, the Quick Start Guide
and the CD-ROM are not included in the package.
Warning: Do not unpack the mainboard from its anti-static
packaging until you are ready to install it.
Like most electronic equipment, your mainboard may be damaged
by electrostatic discharge. To avoid permanent damage to
components ground yourself while working by using a grounding
strap. Otherwise, ground yourself frequently by touching the
unpainted portion of the computer chassis to drain the static
charges.
Handle the mainboard carefully, holding it by the edges.
You are now ready to start the installation.
Otros manuales para SY-D6IBA
1
Tabla de contenidos
Otros manuales de Placa madre de SOYO
SOYO
SOYO SY-6BA+ Manual de uso y cuidado
SOYO
SOYO SY-7VDA Manual de usuario
SOYO
SOYO SY-7ISA+ Manual de usuario
SOYO
SOYO SY-6BA+ Manual de uso y cuidado
SOYO
SOYO Motherboard SY-6ZB Manual de usuario
SOYO
SOYO Mainboard SY-5S Manual de usuario
SOYO
SOYO SY-P4I845PE Manual de usuario
SOYO
SOYO 82440 FX Manual de uso y cuidado
SOYO
SOYO SY-6ILA Manual de uso y cuidado
SOYO
SOYO SY-6IEB Manual de uso y cuidado
SOYO
SOYO SY-6KE Manual de usuario
SOYO
SOYO SY-K7AIA Manual de usuario
SOYO
SOYO Super 7 SY-5EMA Manual de usuario
SOYO
SOYO SY-K7VMP Manual de usuario
SOYO
SOYO SY-K7ADA Manual de usuario
SOYO
SOYO SY-7VBA 133 Manual de usuario
SOYO
SOYO 486 PCI/VESA Manual de uso y cuidado
SOYO
SOYO SY-P4VM800 Manual de usuario
SOYO
SOYO SY-7IZB+N Manual de usuario
SOYO
SOYO SY-K7VTA PRO Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
