Southwestern Bell FA970 Manual de usuario

in some countries. Southwestern Bell Freedom

Phone® Retail Sales assumes no responsibility for

damages or penalties incurred resulting from the use of

this product in a manner or location other than that for

which it is intended.

This one-year warranty is in lieu of all other expressed

warranties, obligations, or liabilities.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR

LIABILITIES, INCLUDING BUT NOT LIMITED TO THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, SHALL BE

LIMITED IN DURATION TO THE ONE-YEAR

DURATION OF THIS WRITTEN LIMITED WARRANTY.

SOME STATES DO NOT ALLOW LIMITATIONS ON

HOW LONG AN IMPLIED WARRANTY LASTS, SO THE

ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

IN NO EVENT SHALL WE BE LIABLE FOR ANY

SPECIAL, INCIDENTAL OR CONSEQUENTIAL

DAMAGES FOR BREACH OF THIS OR ANY OTHER

WARRANTY, EXPRESSED OR IMPLIED,

WHATSOEVER.

Some states do not allow the exclusion or limitation of

special, incidental or consequential damages, so the

above limitation or exclusion may not apply to you.

This warranty gives you specific legal rights, and you

may also have other rights which may vary from state to

state.

Covered under the US patent: PAT. D422277

TOLL FREE HELP LINE

1-800-366-0937

http://www.swbfreedomphone.com

FA970 OWNER’S MANUAL

All-Digital Telephone

Answering System

with Voice Day/Time

Stamp

STOP — don’t take unit back to the store

LOOK — for the toll-free “help” telephone number

LISTEN — as our experts talk you through the problem

For immediate answers to your questions regarding

operation, missing parts or installation, call the

Southwestern Bell Freedom Phone®

Retail Sales Help Line:

1-800-366-0937

Monday - Friday 8:30 AM - 9:00 PM (EST)

Saturday 8:30 AM - 12:30 PM (EST)

http://www.swbfreedomphone.com

SOUTHWESTERN BELL

FREEDOM PHONE®

7475 N. GLEN HARBOR BLVD.,

GLENDALE, AZ 85307

FA970 IB-3340B Printed in Hong Kong LIB731Y2

LOCATION OF CONTROLS

TOP VIEW:

1. Battery Low LED

Indicator

2. Answer On/Off Button

3. Time Set / Repeat

Button

4. Mailbox 2 Message

LED Indicator

5. Mailbox 2 Play/Skip

Button

6. Mailbox 1 Play/Skip

Button

SIDE VIEW:

REAR VIEW:

7. Mailbox 1 Message

LED Indicator

8. Microphone

9. Greeting Button

10. Stop / Save Button

11. Rotary Volume Control

12. Ring Select 2/4/TS

13. Telephone Line

14. AC Adaptor Jack

15. Telephone Extension

Line

PLEASE READ IMPORTANT

SAFETY INSTRUCTIONS ON

PAGES 2-4 BEFORE USE.

Congratulations!

You have purchased an FA970 Digital Answering System

with Voice Day/Time Stamp manufactured to the highest

standards of SOUTHEWSTERN BELL FREEDOM

PHONE®RETAIL SALES.

Digital Technology

This digital design utilizes a computer chip to perform

answering system functions more efficiently and with

more versatile features than microcassette answering

machines.

BEFORE INSTALLING AND OPERATING THIS

ANSWERING SYSTEM, IT ISVERY IMPORTANTTHAT

YOU READ THIS OWNER’S MANUAL.

IMPORTANT SAFETY

INSTRUCTIONS

BEFORE USING YOUR TELEPHONE EQUIPMENT,

BASIC SAFETY PRECAUTIONS SHOULD ALWAYS

BE FOLLOWED TO REDUCE THE RISK OF FIRE,

ELECTRIC SHOCK AND INJURY TO PERSONS,

INCLUDINGTHE FOLLOWING:

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on the

product.

3. Unplug this product from the wall telephone jack and

power outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

4. Do not use this product near water, for example, near

a bath tub, wash bowl, kitchen sink, or laundry tub,

in a wet basement, or near a swimming pool.

5. Do not place this product on an unstable cart, stand,

or table. The product may fall, causing serious

damage to the product.

6. Slots or openings in the cabinet and the back and

bottom are provided for ventilation, to protect it from

overheating. These openings must not be blocked

or covered. The openings should never be blocked

by placing the product on a bed, or other similar

surface. This product should never be placed near

or over a radiator or heat register.

7. This product should be operated only from the type

of power source indicated on the marking label. If

you are not sure of the type of power supply to your

home, consult your dealer or local power company.

8. Do not allow anything to rest on the power cord. Do

not locate this product where the cord will be abused

by persons walking on it. Do not attach the power

cord to building surfaces.

9. Do not overload wall outlets and extension cords as

this can result in the risk of fire or electric shock.

10. Never push objects of any kind into this product

through cabinet slots as they may touch dangerous

voltage points or short out parts that could result in

the risk of fire or electric shock. Never spill liquid of

any kind on the product.

11. To reduce the risk of electric shock, do not

disassemble this product, but take it to a qualified

serviceman when some service or repair work is

required. Opening or removing covers may expose

you to dangerous voltages or other risks. Incorrect

reassembly can cause electric shock when the

appliance is subsequently used.

12. Unplug this product from the wall outlet and refer

servicing to qualified service personnel under the

following conditions:

a. When the power supply cord or plug is damaged

or frayed.

b. If liquid has been spilled into the product.

c. If the product has been exposed to rain or water.

d. If the product does not operate normally by

following the operating instructions. Adjust only

those controls that are covered by the operating

instructions because improper adjustment of other

controls may result in damage and will often

require extensive work by a qualified technician

to restore the product to normal operation.

e. If the product has been dropped or cabinet has

been damaged.

f. If the product exhibits a distinct change in

performance.

123

Figure B

Figure A

10. Discard “dead” batteries as soon as possible since

“dead” batteries are more likely to leak in a product.

11. Do not store this product, or the batteries identified

for use with this product, in high-temperature areas.

Batteries that are stored in a freezer or refrigerator

for the purpose of extending shelf life should be

protected from condensation during storage and

defrosting. Batteries should be stabilized at room

temperature prior to use after cold storage.

Save These Instructions

GENERAL INFORMATION

BOX CONTENTS

This package contains:

• FA970 Digital Telephone Answering System

• One (1) AC Adaptor 120V AC

• Owner’s Manual

• One (1) Quick Installation Guide

• One (1) Remote Access Card

• Warranty Card (Part of Owner’s Manual)

If anything is missing or damaged, contact the place of

purchase, Keep the shipping carton and packaging, in

case you need to transport the telephone.

For your reference, keep a record of the date purchased.

Please save sales receipt for warranty reference.

Date of Purchase ____________________

INSTALLATION

CAUTION

1. Never install telephone wiring during a lightning storm.

2. Never install telephone jacks in wet locations unless

the jack is specifically designed for wet locations.

3. Never touch uninsulated telephone wires or terminals

unless the incoming telephone line has been

disconnected at the network interface.

4. Use caution when installing or modifying telephone

lines.

Note:

Refer to “FCC Requirements” section on page 18

before connection to telephone line.

13. Avoid using a telephone (other than a cordless type)

during an electrical storm. There may be a remote

risk of electric shock from lightning.

14. Do not use the telephone to report a gas leak in the

vicinity of the leak.

Save These Instructions

SAFETY INSTRUCTIONS FOR

BATTERIES

CAUTION

TO REDUCE THE RISK OF FIRE OR INJURY TO

PERSONS, READ AND FOLLOW THESE

INSTRUCTIONS.

1. Use only the 1604A size alkaline batteries mentioned

in the Owner’s Manual.

2. Do not dispose of the batteries in a fire. The cells

may explode. Check with local codes for possible

special disposal instructions.

3. Do not open or mutilate the batteries. Released

electrolyte is corrosive and may cause damage to

the eyes or skin. It may be toxic if swallowed.

4. Exercise care in handling batteries in order not to

short the batteries with conduction materials such

as rings, bracelets, and keys. The batteries or

conductors may overheat and cause burns.

5. Do not attempt to recharge the batteries identified

for use with this product. The batteries may leak

corrosive electrolyte or explode.

6. Do not attempt to rejuvenate the batteries identified

for use with this product by heating it. Sudden release

of the battery electrolyte may occur causing burns

or irritation to eyes or skin.

7. When replacing batteries, all batteries should be

replaced at the same time. Mixing fresh and

discharged batteries could increase internal cell

pressure and rupture the discharged batteries.

8. When inserting batteries into this product, the proper

polarity or direction must be observed. Reverse

insertion of the batteries can cause charging, and

that may result in leakage or explosion.

9. Remove the batteries from this product if the product

will not be used for a long period of time (several

months or more) since during this time the batteries

could leak in the product.

456

To Connect the AC Adaptor

Connect the AC adaptor into the back of the unit. Plug

the other end into the AC wall power outlet (Fig C). Do

not attach (staple, etc.) the AC Adaptor cord to the

building wall.

To Install One 9 Volt Battery

IMPORTANT NOTICE

Connect the AC adaptor Before installing the

battery

One 9 volt battery (not included) is required to maintain

your personalized greeting and recorded messages

during a power failure. If there is a power failure and the

battery is not installed, both your personalized greeting

and recorded messages will be lost.

1. Using a small Philips type screwdriver, remove the

screw located in the battery compartment on the

bottom of the base and lift the battery compartment

door (Fig A).

2. Install one 9 volt battery. (Fig B)

3. Replace battery compartment door, and replace

screw.

Note:

Install a replacement battery once a year to insure

proper operation of the power failure protection feature.

The battery status is indicated by the BATT. LOW

indicator. If a fresh battery is installed, the LED indicator

stays off, when the unit is in the ANSWER ON mode. If

the battery is low/not installed, the indicator will flash.

Choosing Your Location

Before making any connections, locate FA970 near an

AC power outlet and a wall telephone jack (RJ11C).

To Connect the Telephone Line

1. Plug the telephone line cord (connected to the back

of the FA970) into the modular outlet in your telephone

wall jack.

2. If you are connecting your FA970 to an extension

telephone, plug one end of the extension telephone

line cord to the extension line jack (located on back

of unit). Plug the other end into the telephone.

RECORDING YOUR GREETING

There are approximately 11 minutes of total recording

time shared by your greeting and incoming messages.

Your system comes with a prerecorded outgoing

greeting: “Please leave your message after the beep.”

To record your own personalized outgoing greeting:

To Record Your Greeting

1. Press and hold the GREETING button.

Note:

You have a maximum of 30 seconds to record

your outgoing greeting.

2. After you hear one beep, speak clearly towards the

built in microphone (in the speaker holes).

3. When finished, release the GREETING button.

4. The unit will beep once and play back your recorded

greeting.The message LEDs will be lit solid to indicate

the unit is in Answer On mode.

Note:

The FA970 has two personalized mailboxes.You

have an option to have callers leave messages in either

of the two mailboxes.

If you want the caller to leave a message in a particular

mailbox, your greeting should instruct the callers to press

either the “1” or “2”button before their message recording.

If the caller doesn’t press a key, presses a key other

than “1” or “2”, or waits longer than 3 seconds before

pressing a key, the caller’s message will be automatically

recorded in Mailbox 1.

Sample Message:

“Hello, this is ______________.

I can’t come to the phone right now, but please leave

your name and phone number after you hear the beep.

I’ll return your call as soon as possible. If you wish to

leave a message specifically for Bob, press “1”, for

Joan, press “2”.Thank you for calling.”

Note:

If the FA970 beeps while recording, you have

exceeded the 30 seconds time limit. Record a shorter

greeting, by repeating the steps above.

To Check the Greeting

1. To check the greeting, press and release the

GREETING button quickly.

2. Your outgoing greeting will be played back to you,

and then your system will reset to answer incoming

calls.

Volume Control

Use the rotary VOLUME Control on the side of your unit

to set the volume to the desired sound level.

ANSWERING MACHINE

FEATURES

Voice Time/Day Stamp

The FA970 records the time and day at the end of each

message, if set.

Note:

When setting the Time/Day, do not allow more than

20 seconds to elapse between any step:

Setting Voice Time/Day Stamp

Day Set

1. Press and hold the TIME SET/REPEAT button for 2

seconds. The unit will say “Monday”.

2. Press the ANSWER ON/OFF button until you hear

the correct day.

3. To return to the previous day, press the MAIL 1 or

MAIL 2 button.

Hour Set

1. Once you hear the correct day, press the TIME SET/

REPEAT button to set the hour. The unit will say

“Twelve”.

2. Press the ANSWER ON/OFF button until you hear

the correct hour.

To return to the previous hour, press the MAIL 1 or

MAIL 2 button.

Minute Set

1. Once you hear the correct hour, press the TIME SET/

789

LED INDICATIONS

LED Indicator Status

BATT. LOW LED blinks rapidly.

Mailbox 1 or Mailbox 2 LED blinks to

indicate new messages received.

Mailbox 1 and Mailbox 2 LEDs are lit

solid.

Mailbox 1 and Mailbox 2 LEDs are off.

Reason

A 9 volt alkaline battery (not included)

has not been installed or needs to be

replaced.

New messages have been received.

System is in Answer On Mode.There

are no saved messages

Unit is in the Answer Off mode.

Actions

Install a fresh 9 volt alkaline battery.

Press PLAY button to hear your

messages.

No Action required. Unit is ready to

receive calls.

Press Answer ON/OFF button to turn

on machine.

Figure C

REPEAT button to set the minute.The unit will say “0”

(which sounds like “oh”).

2. Press the ANSWER ON/OFF button until you hear

the correct minute. To return to the previous minute,

press the MAIL 1 or MAIL 2 button.

AM/PM Set

1. Once you hear the correct minute, press the TIME

SET/REPEAT button to set AM/PM.The unit will say

“AM”.

2. Press the ANSWER ON/OFF button.The unit will say

“PM”. Press the MAIL 1 or MAIL 2 button to return to

“AM”.

3. Once you hear the correct AM/PM setting, press the

TIME SET/REPEAT button to complete the procedure.

The unit will announce the day and time that is now

set.

Note:

To check the current day and time, press and

release the TIME SET/REPEAT button. If you did not

set the Voice Time/Day Stamp, the unit will say “Time is

not set”.

Recording Memo Message

You can record a memo message, for another member

of your household, in either of the two mailboxes (Mailbox

1 or Mailbox 2). It will be played back, along with other

messages, in the corresponding mailbox.

To Record Memo

1. Press and hold one of the MAIL 1 or MAIL 2 buttons.

A beep will sound and all the message LEDs will turn

off.

2. Record your message (up to 60 seconds) through

the microphone in the speaker holes.

3. When your message is completed, release the button.

A beep will sound, and the corresponding message

LED will be increased by one.

Note:

When the total number of combined messages in

Mailbox 1 and Mailbox 2 equal 30 or more, new MEMO

messages can be recorded in Mailbox 1 only.

Message Playback

When the message LED indicators blinks, you have

received new messages. It will blink to indicate the

number of messages received (up to 9 times).

To Hear Your Messages

1. Press and release the corresponding Mailbox button

on your unit.

2. The FA970 will automatically playback your messages

in the order they were received.

3. The set time and day will be heard at the end of each

message, if you set the Voice Time/Day Stamp.

4. Your FA970 will automatically stop and sound 3 beeps

after the last message has played back.The message

count will reset, and the message LEDs will be lit solid.

5. NEW INCOMING MESSAGES WILL REPLACE OLD

MESSAGES UNLESS YOU FOLLOW THE SAVE

PROCEDURE. (see below)

To Stop Message Playback

During message playback, press and release the STOP/

SAVE button. Your FA970 will reset and will save all

messages.

To Repeat the Current Message

During playback, press and quickly release the TIME

SET/REPEAT button ONCE.

To Repeat the Previous Message

During playback, press and quickly release TIME SET/

REPEAT button TWICE within 2 seconds.

To Skip the Current Message

During playback, press and quickly release the

respective SKIP button.

To Save All of Your Messages

MESSAGE WILL BE ERASED UNLESS YOU SAVE

THEM. If you wish to save your messages after listening

to them:

After the last message has played back, and 3 beep

sound, press and release the STOP/SAVE button. Both

Mail 1 and Mail 2 LEDs will flash rapidly for 20 seconds.

Within this period, press MAIL 1 button to save Mailbox

1 messages or press MAIL 2 button to save Mailbox 2

messages.

To Save Selected Messages

IF YOU WISH TO SAVE A PARTICULAR MESSAGE

(BUT NOT ALL OF THE MESSAGES), PRESS THE

ANSWER ON/OFF BUTTON DURING PLAY BACK OF

THAT MESSAGE. After you press the ANSWER ON/

OFF button to save a particular message, the

corresponding MAIL 1 or MAIL 2 LED will blink rapidly

during the remaining playback of that message.

IMPORTANT

1. You must follow the above “SAVE” procedure each

time you listen to your incoming messages and before

the system answers a new incoming call or all

messages will be lost.

2. The maximum digital recording memory of your FA970

answering system is approximately 11 minutes.

3. The maximum digital recording time for each incoming

message is 60 seconds.

Message Capacity Full Detection

Your FA970 signals the caller when the message

capacity is full. When the message capacity is full, the

unit will answer with 3 beeps on the 10th ring, pause 20

seconds, and then automatically disconnect the

telephone line.

Voice Activated Recording (VOX)

Your FA970 records messages for up to 60 seconds, as

long as the caller speaks.

To avoid unnecessary pauses due to hang-ups and to

save message capacity, your unit will automatically stop

recording after 7 seconds of silence.

To Turn Unit Off

If you do not want your system to answer calls, press

the ANSWER ON/OFF button. All indicators will turn off.

Call Interrupt

If the unit answers before you do, you can turn it off by

picking up any extension phone. If the unit does not stop

answering, press the hook switch of your telephone for

about one second and release.You may also press the

STOP/SAVE button.

Call Screening

To listen to an incoming call without picking up the phone,

let your unit answer the phone when it rings. If you don’t

want to talk to the caller, just let your unit take a message,

and adjust the volume control on the side of the unit to

listen. If you don’t want to listen to the caller’s message,

just lower the volume.

Note:

Callers will be unaware that you are screening

their calls. If you want to talk to the caller, pick up the

10 11 12

phone and talk.

Battery Low Indicator

The Batt. Low LED will flash to indicate the 9 volt battery

(not included) needs to be installed or replaced.

Power Failure Protection/Battery Back Up

If an AC power failure occurs, or the power plug comes

out of the wall, your unit will shut down until the power is

restored.

When the power is restored, any messages recorded

before the power failure will be saved IF YOU HAVE

INSTALLED A 9 VOLT BATTERY.The message indicator

LED will flash to indicate the number of new messages

received.

If your unit is not operating properly when the power is

restored, proceed with a unit reset.

To Reset Unit

1. Unplug the AC adaptor from the power outlet and

telephone line.

2. Remove the 9 volt battery and plug the AC adaptor

back into the power outlet.

3. Replace with 9V alkaline battery and insert the

telephone back into the wall jack.

4. Record a new outgoing greeting or you can use the

pre-recorded announcement.

5. Reset the Voice Day/Time Stamp.

Ring Select

You can select the number of rings in which a call will be

answered. Set the Ring Select switch (on the side of

unit) to 2 or 4 rings, or Toll Saver (TS).

Toll Saver (TS)

Your unit has a built-in automatic toll saving feature.This

feature lets you know if you have received any messages

before it answers, thus saving you on long distance costs.

How Toll Saver Works

IF YOU HAVE SET THE RING SELECT SWITCH TO

TOLL SAVER (TS), when calling your unit from a remote

location to check for messages, listen to the number of

rings:

No Messages Received

If your phone rings more than two times, you have no

new messages.You can hang up on the third ring before

your unit answers, and save the cost of the call.

Note:

If no new messages are received, your unit will

answer the call after the fourth ring.

Messages Received

If your unit answers after only 2 rings, you have received

new messages, which you can then retrieve by following

the Remote Message Playback section, below.

TONE REMOTE OPERATION

Remote Security Code

To access answering functions from an outside line, you

will need to enter the three digit security code located

on the bottom of your unit. Write this number on the

Remote Access Card, which you can keep in your wallet.

Remote Turn On

If you forget to turn on your unit:

1. Call your unit from a touch-tone phone.

2. Wait 12-14 rings until the machine answers.

3. The FA970 will automatically answer by playing your

greeting.You may hang up the phone, and subsequent

calls will be answered.

Remote Message Playback

1. Call your unit from a touch-tone telephone.

2. After your FA970 answers, it plays the outgoing

greeting and beeps once. Dial your three digit security

code within 20 seconds after the beep, pressing and

holding each digit for 1-2 seconds. Allow a 2 seconds

interval between each digit.

3. Your FA970 will sound one beep to indicate the code

was entered correctly. (If there are no beeps, enter

your code again.)

4. You can press the following buttons on your keypad:

Option Press

Playback Mailbox 1 Messages (1)

Playback Mailbox 2 Messages (2)

Record Memo Message (3)

Record New Greeting (8)

Turn Off Answer Mode (9)

If you press “1” or “2” (to playback messages), you have

the follow options:

Option Press

Erase Current Message (0)

Repeat Current Message (4)

Repeat Previous Message (4) repeatedly

Stop Message Playback (5)

Skip to Next Message (6)

To SAVE messages, hang up the telephone.

Note:

Your FA970 will sound a series of beeps if there

are no messages.

Remote Record New Greeting

If you press 8 (to record new greeting):

1. When you hear a beep, begin recording your new

greeting (up to 30 seconds).

2. When you have finished recording your new greeting,

press (5). The unit will beep, and the new greeting

will playback to you.

3. Hang up the telephone.

Remote Record Memo

If you press 3 (to record memo message):

1. Within three seconds of pressing “3”, press “1” or “2”

to select Mailbox 1 or Mailbox 2. Otherwise, the memo

will be recorded in Mailbox 1.

2. When you hear a beep, begin recording your memo

(up to 60 seconds).

3. When you have finished recording your memo

message, press (5).

4. The corresponding Mailbox message count will be

increased by one.

To Retrieve Messages when Recording

Memory is Full

1. When the message capacity is full, the unit will sound

3 beeps after answering the phone.

2. Within 20 seconds after the 3 beeps, dial your 3 digit

security code.

3. Your FA970 will sound one beep to indicate the code

was entered correctly.

13 14 15

4. Follow the remote message playback procedure.

IMPORTANT

Remote message retrieval will not work when calling

from a rotary or push button pulse dialing phone, unless

a tone generator is used.

Also, some touch tone phones only output tones for a

fraction of a second. If you experience difficulty with

remote operation, try another phone, or use a separate

tone generator.

ANSWERS TO COMMONLY ASKED

QUESTIONS

Section One-General

Q. My answering machine won’t work.What do I do?

A. You may need to reset your machine. Refer to the

“To Reset” section on page 13. If that doesn’t work,

call the Toll Free Help line at 1-800-366-0937 Monday

- Friday 8:30 AM - 9:00 PM and Saturday 8:30AM -

12:30 PM (EST).

Q. Why are the message LED indicators flashing?

A. Refer to the “LED Indications” section on page 7.

Q. Can my unit be left on for a long period of time?

A. Your unit is designed to be on 24 hours a day.

Q. My AC Adaptor feels warm to the touch. Is this

normal?

A. It is characteristic of your AC Adaptor to feel slightly

warm. There is no need to be alarmed.

Q. Will my unit operate in a very cold or hot

environment?

A. Your unit is designed to perform most efficiently at

room temperature. However, it can be used in

environments ranging from 50° to 120° Fahrenheit.

Q. How do I know my machine is set to answer calls?

A. When the message LEDs are lit solid or flash your

unit is ready to answer calls. After most modes of

operation (such as after recording your greeting) the

unit will automatically switch to the Answer ON mode.

Q. What is the maximum length of incoming

messages I can record on my unit?

A. Incoming message recording time is up to 60

seconds.

Section Two-Outgoing Greeting

Q. The first portion of my greeting will not record.

Why?

A. After you press and hold the GREETING button, do

not begin speaking until after you hear the beep.This

signals you to begin your greeting.

Q. When I try to record a new greeting, the pre-

recorded greeting plays back.Why?

A. Pressing the GREETING button for less than 2

seconds will playback the current greeting.

To record the new greeting, you must hold down the

GREETING button for more than 2 seconds. Release

the button when you are finished recording.

Q. What is the maximum length of the greeting I can

record on my unit?

A. Your greeting recording time is up to 30 seconds.

Q. When I re-recorded a new greeting and my unit

automatically checked the recording, there was

no sound.Why?

A. Adjust the volume level. Use the rotary VOLUME

Control on the right side of the unit to increase the

volume.

Q. How do I erase the incoming messages to make

room for more?

A. Your FA970 automatically erases old messages that

have already been listened to when new ones are

recorded (unless you save them with the message

save command). (page 11)

Q. Are my messages automatically saved?

A. No, you must follow the Save procedures (page 11)

to save your messages. New messages will replace

old messages unless you follow the Save procedure.

Section Three-Remote Operation

Q. I am checking my messages remotely from a

touch tone telephone, but my unit will not play

back my messages. Why?

A. Although the telephone you are using is a push-

button telephone, it is possible that the telephone

line over which you are calling is not a standard touch

tone line.Try calling your unit from a different location

(i.e., a pay telephone).

Q. Does my unit have to be connected to a touch-

tone telephone for remote operation to work?

A. No, it is not necessary. However, to retrieve your

recorded messages remotely, you must call from a

touch-tone telephone system.

Q. I am calling from a remote phone to check my

messages. What will happen if I hang up before

all my messages are played back?

A. Your unit will save your messages and reset to

answer incoming calls.

Q. What is the range of my remote feature?

A. Your remote will work from any touch-tone telephone

in the world that is compatible to the U.S.A.

specifications. In addition, the telephone over which

you are calling must not have any unusual or loud

background noise, and the phone must be able to

produce a tone of at least 2 seconds when you enter

your security code.

FCC WANTS YOU TO KNOW

This equipment complies with Part 68 of the FCC rules.

On the bottom of the base of this equipment is a label

that contains, among other information, the FCC

Registration Number and Ringer Equivalence number

(REN) for this equipment. You must, upon request,

provide this information to your telephone company.The

REN is useful to determine the quantity of devices you

may connect to your telephone line and still have all of

those devices ring when you telephone number is called.

In most, but not all areas, the sum of the RENs of all

devices connected to one line should not exceed five

(5.0). To be certain of the number of devices you may

connect to your line, as determined by the REN, you

should contact your local telephone company to

determine the maximum REN for your calling area.

If your telephone equipment causes harm to the

telephone network, the telephone company may

discontinue your service temporarily. If possible, they will

notify you in advance. But if advance notice isn’t practical,

you will be notified as soon as possible. You will be

16 17 18

informed of your right to file a complaint with the FCC.

Your telephone company may make changes in its

facilities, equipment, operations, or procedures that could

affect the proper functioning of your equipment. If they

do, you will be notified in advance to give you an

opportunity to maintain uninterrupted telephone service.

If you experience trouble with this telephone equipment

disconnect from the network until the problem has been

corrected or until you are sure that the equipment is not

malfunctioning.

This equipment may not be used on coin service provided

by the telephone company. Connection to party lines is

subject to state tariffs.

Warning: Changes or modifications to this unit not

expressly approved by the party responsible for

compliance could void the user’s authority to operate

the equipment.

NOTE: This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequently energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is

no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Increase the separation between the equipment and

receiver.

• Connect the equipment into and outlet on a circuit

different from that to which the receiver is connected.

• Consult the dealer or an experienced radio TV

19 20 21

technician for help.

SERVICE

According to FCC regulations, this equipment, which has

been certified and registered by the FCC, may only be

repaired by authorized persons. If repairs or adjustments

are made by an unauthorized person, the FCC

certification may be voided. Should you encounter any

problems, please call the Southwestern Bell Freedom

Phone®Retail Sales Toll-Free Customer Help Line for

assistance: 1-800-366-0937, Monday - Friday 8:30 AM -

9:00 PM, and Saturday 8:30 AM - 12:30 PM (EST). You

can also visit our website at

http://www.swbfreedomphone.com.

FOR IN-WARRANTY SERVICE:

Package your complete unit (including all adapters, line

cords, and other accessories) and ship the unit postage

prepaid* and insured (for your protection) to:

SOUTHWESTERN BELL FREEDOM PHONE®

DEPT.: In Warranty

7475 North Glen Harbor Blvd., Glendale, AZ 85307

Be sure to include your return address, proof of purchase,

a daytime phone number, $9.50 for postage and

handling*, and a brief explanation of your difficulties.

*NOTE: California residents need only provide proof

of purchase and should call 1-800-366-0937 for

shipping instructions.

FOR OUT-OF-WARRANTY REPLACEMENT:

You may call our toll-free Help Line for the price of a

replacement before returning your unit. Please follow all

instructions for In-Warranty service (above) to return your

unit, and mark the package: DEPT.: Out-of-Warranty.

QUESTIONS?

STOP — don’t take unit back to the store

LOOK — for the toll-free “help” telephone number

LISTEN — as our experts talk you through the problem

For immediate answers to your questions regarding

operation, parts or installation, call:

Southwestern Bell Freedom Phone®

Retail Sales Help Line at:

1-800-366-0937

LIMITED WARRANTY

This Southwestern Bell Freedom Phone®is warranted

to the original purchaser to be free from defects in

materials and workmanship under normal installation,

use and service for a period of one (1) year from the

date of purchase as shown on the purchaser’s receipt.

The obligation of Southwestern Bell Freedom Phone®

Retail Sales, under this one (1) year warranty shall be

limited to repair or replacement (at our option), during

the warranty period of any part which proves defective

in material or workmanship under normal installation,

use and service, provided the product is returned to

Southwestern Bell Freedom Phone® Retail Sales or

to one of our authorized Service centers

TRANSPORTATION CHARGES PREPAID. (California

residents should call 1-800-366-0937 for shipping

instructions.) Products returned to us or to an Authorized

Service Center must be accompanied by a copy of the

purchase receipt. In the absence of such purchase

receipt, the warranty period shall be one (1) year from

the date of manufacture.

To obtain service under this warranty, return the defective

product to the service center nearest you together with

your sales slip and $9.50 for postage and handling.

California residents need only provide proof of purchase

and should call 1-800-366-0937 for shipping instructions.

You may also have other warranty rights which vary from

state to state.

This warranty shall be invalid if the product is damaged

as a result of defacement, misuse, abuse, neglect,

accident, destruction or alteration of the serial number,

improper electrical voltages or currents, repair, alteration

or maintenance by any person or party other than our

own service facility or an authorized service center, or

any use violative of instructions furnished by us.

This warranty is also rendered invalid if this product is

removed from the country in which it was purchased, if it

is used in a country in which it is not registered for use,

and/or if it is used in a country for which it was not

designed. Due to variations in telephone and

communications laws, this product may be illegal for use

Otros manuales para FA970

Tabla de contenidos

Otros manuales de Contestador automático de Southwestern Bell

Southwestern Bell

Southwestern Bell FA970 Manual de usuario

Southwestern Bell

Southwestern Bell GH3150 Manual de usuario

Southwestern Bell

Southwestern Bell FREEDOM PHONE FA970B Manual de usuario

Manuales populares de Contestador automático de otras marcas

Radio Shack

Radio Shack TAD-795 Manual de usuario

AT&T

AT&T 2455 Manual de usuario

Panasonic

Panasonic KX-TG2583CB Manual de usuario

Panasonic

Panasonic KX-TGE820E Manual de usuario

BellSouth

BellSouth GH9488 Guía de seguridad

GE 2-9985 Manual de usuario

Panasonic

Panasonic KX-TG2631 Manual de usuario

Panasonic

Panasonic KX-TCD961CXB Manual de usuario

Krown

Krown PortaPrinter 2000STD Manual de usuario

AT&T

AT&T 1717 Manual de usuario

Alcatel

Alcatel TEMPORIS 55-CE Manual de usuario

AT&T

AT&T E2562 Manual de usuario

Telstra

Telstra Monitor 420 Manual de usuario

Kortex

Kortex IAM V90 Manual de usuario

Panasonic

Panasonic EASA-PHONE KX-T1451 Manual de usuario

Philips

Philips VOIP8551B/05 Manual de usuario

Topcom

Topcom LUCCA Answering Machine Manual de usuario

Panasonic

Panasonic KX-TGM420 Manual de usuario