Southwest Graphic Whizard PT320 CC Manual de usuario

PT320 CC

Business card cutter

SET UP/OPERATOR’S MANUAL

755 Griffith Court, Burlington, Ontario, CANADA Tel +905-633-7663 Fax +905-637-4419

WWW.GRAPHICWHIZARD.COM

Table of Contents

Chapter 1 Safety........................................................................................4

1 Safety Precautions .........................................................................4

1-1 Safety Precautions....................................................................4

1-2 Warning Labels.........................................................................5

2 Safety Devices................................................................................5

2-1 Operational Safety Guidelines...................................................6

Chapter 2 General......................................................................................7

1 Outline of mechanism .....................................................................7

1-1 Purpose ...................................................................................7

1-2 Main technical parameters ........................................................7

1-3 Accessories ..............................................................................7

1-4 Machines Diagram....................................................................8

Chapter 3 Set-up, operation and maintenance .............................................9

1 Set-up............................................................................................9

1-1 Set-up Guide............................................................................9

1-2 Set-up Guidelines ...................................................................10

2 Operation .....................................................................................11

2-1 Cutting ..................................................................................11

2-2 Operation Panel......................................................................12

2-3 Datum Selection.....................................................................13

2-4 Cutting mode.........................................................................14

24 UP - 12" x 18" QUICK SET-UP….………………………………………………………………………..14

2-5 Set-up of the Cutting Parameters.............................................30

2-6 Job Guidelines........................................................................34

2-7 Longitudinal Knife Assembly Replacement................................36

2-8 Paper Weight Adjustment........................................................37

3 Troubleshooting............................................................................38

3-1 Safety cover fails....................................................................38

3-2 Paper Jamming ......................................................................38

3-3 Long Blade Jam......................................................................39

3-4 Cut Mark■not detected..........................................................39

3-5 Cut Mark Sensor failed............................................................40

3-6 Paper Size..............................................................................40

3-7 Paper Feeding........................................................................41

4 Aftercare......................................................................................42

4-1 Maintenance

4-2 Machine Parts Lifespan ...........................................................42

5 System troubleshooting analysis .........................................42

Chapter 1 Safety

This manual is designed to help you operate and maintain the PT320 CC

machine. Please read, understand and keep this manual in a convenient place

for easy access.

DO NOT operate the machine until you have read and understand the

instructions in this manual.

Graphic Whizard Inc. shall not be held liable for incidental consequential

damages resulting from: improper or inadequate maintenance by the

customer; unauthorized modifications or misuse; or operation outside of the

environment specified for the machine.

Graphic Whizard Inc. is committed to continually improving the design and

performance of our product line. Please note: The design and specifications

of this machine are subject to change without notice and without our legal

obligation.

All rights are reserved. No part of this manual may be photocopied, reproduced

or translated to another language without the prior written consent of Graphic

Whizard Inc.

1 Safety Precautions

1-1 Safety Precautions

To prevent any accidents, please follow the precautions below strictly.

(1) Have the ground-wire of the power supply well grounded.

(2) Ensure that any loose hair or clothing are tied back and away from moving

parts of the machine when operating.

(3) Do not touch any electric components of the machine and ensure electrical

components stay dry and out of contact.

(4) Always turn the machine off when not in use.

(5) In case of any issue with the machine, turn off the main power.

(6) Please contact your dealer or Graphic Whizard with any questions or

concerns and before attempting to service machines.

1-2 Warning Label

Operators are required to pay special attention to the places fitted with

the warning labels during operation.

Description of the warn labels

2 Safety devices

To prevent accidents and possible injury to the machine and operator

safety measures have been put in place. Please ensure the Operator is aware of

all safety features and possible hazards on the machine.

2-1 Operational Safety Guidelines

Both fixing and lock covers are set to prevent any tools and clothes from

being rolled into the machine.

A. This warning indicates a pinch point.

Please exercise caution and ensure you are

well clear of nay moving parts

B. This warning indicates a chance of

electric shock. Please do not tamper with

or attempt to repair any electrical machine

components.

C. The machine uses an extremely sharp

cutting blade- do not attempt to touch

anywhere near working parts while it is

running and exercise caution when near

the blades.

Never run the machine if either of the covers are open or damaged. Once

the lock cover is opened, the machine will stop moving right away.

2-1-2 Lock cover, fixing cover

⒈Upper cover ⒉Switch for lock cover

⒊Left-side cover

⒋Right-side cover

⒌Front cover

Fig.1-1Front

Fig. 1-2 Top Fig. 1-3 Back

Safety Labels

⒍Take care- pinch point ⒎Take care of sharp cutter edge

⒏Take care of sharp cutter edge ⒐Take care of sharp cutter edge

⒑Take care of electric shock

Chapter 2 General

1 Outline of mechanism

1-1 Purpose

A quick and simple card cutting machine to expertly cut finished cards from a

12” by 18” stock.

1-2 Main technical parameters

Cutting Longitudinal: cutting by a roller;

horizontal: cutting by a lateral guillotine blade

Feeding Automatic soft friction feeding

Paper size A3(297×420mm) 11” x 17”，SRA3(320×450mm) 12” x 18”

Paper thickness

0.20mm（180g/m²）--- ~0.35mm（350g/m²）

Cutting speed 250 business cards in under 2 minutes

Cutting size Longitudinal:( 89, 85,90,95)mm

Horizontal:(45;50;54;90;95;127)mm;40-250mm,customize)

Mechanical

dimension 550mm×350mm×240mm (L x W x H)

Operating

environment -15

℃

～+40

℃

humidity 35%～70%

Weight About 21Kg, 46 lbs

Power supply AC 90~260V，50/60HZ,0.5A

1-3 Accessories

Item

Quantity

Remark

1 Operating instructions 1 (This manual)

2 Business card catcher 1 For collecting name cards

3 Cross Screwdriver 1 For machine adjustments

1-4 Machine Diagram

1 Left side cover 2 Right side cover

3 Operation panel 4 Upper cover

5 Paper feed tray 6 Feeding wheel

7 Power switch 8 Frontal cover

9 Power cord 10 Lock nut

11 Paper weight adjustment needle 12 Paper weight adjustment needle

13 Left paper guide plate 14 Right paper guide plate

15 Paper feed wheel 16 Horizontal knife

17 Cut wheel 18 Static prevention

19 Business card catcher 20 Waste collection

Setting 320CC Parameters

The 320 Card Cutter is capable of cutting 24 business cards from 12X18 sheet stock. To produce the

cleanest cuts, some adjustments may be required. Let’s start by defining the menu options.

When the 320CC is powered on and ready, the screen will display the current settings. Here’s a

breakdown of the selected settings in the image below.

0024 –this displays the number of cards the cutter will cut from a sheet of 12X18

SRA3 –although this is a European size definition, the 320CC has been set up to accept 12X18 sheets.

The actual measurements for this setting is 12.59 X 17.71, which is well within the capabilities of the

320CC.

3.50X2.00* - defines the size of the cut cards

in –the current measurement value.

Now, this can be changed according to your needs. There are 4 buttons above the display that let you

make changes to the current cut options.

Mode Changeover –allows the user to change the cut size of the business card. See appendix for all

available options

Set Parameter –allows the user to make changes to the parameters with is a subscribed mode.

Start (+) –starts the cut process. The + is used to change parameter settings.

Stop (-) –stops the cut process. The –is used to change parameter settings.

Now we will take a look at the Set Parameter options. Press the Set Parameter button to navigate

through the options.

Note: though many of the parameters are adjustable, the selected mode will program the default

parameters. Some changes should not be required.

Cut Pieces –this is defined by the Mode. In this instance the 320CC is set to cut 24 pieces. This number

increases in increments of 24.

Datum selection: frontal end or mark █–this sets the datum type. In this instance, the 320CC will use

the frontal end. Mark █will read the registration mark.

Tabla de contenidos

Manuales populares de Cortador de otras marcas

Milwaukee

Milwaukee HEAVY DUTY M12 FCOT Manual de usuario

Makita

Makita DCS552 Manual de usuario

SignWarehouse.com

SignWarehouse.com Bobcat BA-60 Manual de usuario

Makita

Makita 4112HS Manual de usuario

GEISMAR STUMEC

GEISMAR STUMEC MTZ 350S Manual de usuario

Hitachi

Hitachi CM 4SB2 Guía de solución de problemas

Dexter Laundry

Dexter Laundry 800ETC1-20030.1 Manual de usuario

GCC Technologies

GCC Technologies AFJ-24S Manual de usuario

DeWalt

DeWalt XR LI-ION DCS350N Manual de usuario

Baudat

Baudat ES1 Manual de usuario

Mafell

Mafell ZAF 200 Guía

Makita

Makita 4100NH Manual de usuario

Formax

Formax FD 574 Manual de usuario

EINHELL

EINHELL TE-MA 1500 Manual de usuario

Husqvarna

Husqvarna Cut-n-Break K 760 Manual de usuario

CLEAN ROOM DEVICES

CLEAN ROOM DEVICES CRD130SS Manual de usuario

TRI tool

TRI tool 301A Manual de usuario

Roller

Roller King 1 1/4 Manual de usuario