Source SEM-IP20 TW SP Manual de usuario

Installation &

Self Test Instructions

EMERGENCY TWIN SPOT

PRODUCT CODE: SEM-IP20 TW SP

Quality

Assurance

years

Unit 7/8 Ashbourne Business Centre, Ballybin Road, Ashbourne, Co. Meath, Ireland, A84 YP58,

Phone: 00353 1 835 7447

Unit 32 Junction One Business Park, Valley Road, Birkenhead, Merseyside, UK, CH41 7ED,

UK Ph: 0330 551 7000

Website: www.sgd.ie

For more information contact:

IP65

COMPLIANT

Product end of life instruction.

This Lighting product is in the scope of EU 2019/2020 directive on Waste Electrical and Electronic Equipment

(WEEE). This product must be disposed according to the legislation. This document is intended for use by

end of life recyclers or treatment facilities. It provides the basic information to assure an appropriate end of life

treatment for the components and materials of the product.

Please follow pictured diagram on the back of this manual showing how to dismantle the product into di󰀨erent

components which should be disposed of correctly. These components consist of plastic, metal and electronic

materials. It is the responsibility of the end user to dispose of this product correctly. Contact www.weeeireland.ie

or your local council for further information.

DISASSEMBLY INSTRUCTIONS

Please refer to this chart for more complete description / fault indication

Test Button Status

Green LED Constant Mains On / No Fault

Green LED Slow Flash Function for 2 minutes

Green LED Fast Flash 3 hour duration Test

Red LED 1 Flash Battery Fault

Red LED 2 Flash Lamp Fault

Red LED 3 Flash Duration Test Fault

Self-Test

Self-Test ttings perform a self-commissioning test at rst power on. After charging for 24 hours a full duration test (3 hours) is

performed. Initial function and duration tests are randomly generated.

They are then performed in accordance with standard requirements (every 30 days for function tests and every 52 weeks for

duration tests).

A single bi-colour indicator LED is tted in all Self-Test products. This LED is clearly visible for manual inspection. It indicates the

module status.

The LED shows permanent green or ashing green when conditions are normal and ashing red if a fault condition is present.

Function test

A function test is a 2 minutes test that simulates a mains failure and checks the operation of the emergency light source from the

battery supply.

The local indicator LED slow ashes green whilst the 2 minutes function test is in progress.

If there is a failure during a function test the local indicator LED changes to a ashing red.

Duration test

A duration test simulates a mains failure. It also checks the operation of the emergency light source from the battery supply for

the rated duration of the module.

The local indicator LED fast ashes green whilst the duration test is in progress.

If there is a failure during a duration test the local indicator LED either changes to ashing red.

The battery is required to be fully charged before a duration test can be started.

The test button of the unit has the following functions

Test Button Green LED Status

Press for about 1s O󰀨 Emergency mode for 1 second

Press for about 5s Slow ash Function for 30 seconds

Press for about 7s Fast ash 3 hour duration test

Press for about 10s End the duration test

General Instructions

These instructions should be read carefully and retained after installation by the end user for future reference

and maintenance These instructions should be used to aid installation of the product

Safety Instructions

• Installation of this luminaire should only be carried out by a qualied electrician or competent person

to the latest Building and current IEE Wiring Regulations

(BS7671)

• Recommended routine test procedures are in line with BS

5266 & BS EN 50172 & I.S3217:2013-A1:2017

• Please isolate mains prior to installation/maintenance

• Check the total load on the circuit (including when this

luminaire is tted) does not exceed the rating of the circuit

cable, fuse or circuit breaker

• Please note the IP (Ingress of Protection) rating of this

luminaire when deciding the location for installation

• Installing in areas where the temperature consistently drops

below 0°C may shorten the battery life

• We recommend a minimum charge period of 24 hours before doing an emergency duration test

• This product is Class II, double insulated

• This product is non-dimmable

• This product is IP20 rated

Installation

• Remove the centre front screw, push near

locking tabs to clear and remove the front

cover.

• Open your selected cable entry and feed

mains cable through.

• Connect the cables to the terminal block as

shown in the diagram. Connect the mains

supply to the PERMANENT LIVE (L) and

NEUTRAL (N) connections.

• Connect the battery

• Ret the cover.

• Ret the screw back into the front cover to secure.

• Reconnect the mains supply.

General

The LED lamps tted in this product are non-

replaceable. The unit should be recycled in the

correct manner when it reaches the end of its life.

If the batteries have been left in a discharged

state for a period of time, we recommend that

several charge and discharge cycles must be

preformed to restore the battery to it full capacity.

The batteries in this tting are 3.2V LiFePO4

battery and must be disposed of correctly.

Clean with a soft dry cloth only, do not use

agressive cleaning products or solvents which

may damage the tting.

Warning

This product has a warranty of 5 years (excluding battery) from date of purchase. Failure to install this product

in accordance with the current edition of the IEE Wiring Regulations, improper use, or removal of the batch

codes will invalidate the warranty. If this product should fail within its warranty period it should be returned to

the place of purchase for a free of charge replacement. SGD does not accept responsibility for any installation

costs associated with the replacement product. Your statutory rights are not a󰀨ected. SGD reserve the right to

alter product specication without prior notice.

Specication

Series: (Non-maintained) 220-240 V AC 50Hz

Input: 3.2V LiFePO4 battery IP20

Emergency Battery Duration: 3 Hours

Colour Temperature 6000K

Ingress Protection: IP20

Operating Temperature 0°C to +30°C

Wattage: 2 x 3W

Protection Class CLASS II

Testing & Commissioning

• Ensure the power is connected.

• Connect the battery

• Switch on the unswitched supply - check the charge LED illuminates

• Use the test button to test the emergency operation.

• All Emergency lighting tests must be logged. The Emergency lighting logbook must be provided in order to

be covered by any warranties.

Manby Business Park, Manby, Lincolnshire

R1.1 20012021 241840

Typical Wiring Diagram:

�Ensure the power is connected.

�Connect the

�

Name: Tel:

Luminaire Details:- Lamp Type—LED

ROUTINE TEST RECORD

Year 1 Year 2 Year 3 Year 4 Year 5

Monthly Test Date Date Date Date Date

Three Hour

BATTERY

BATTERY CHARGER

BATTERY CONNECTION

MAINS INPUT

CONNECTION

TEST BUTTON

CHARGE LED

Manby Business Park, Manby, Lincolnshire

R1.1 20012021 241840

Typical Wiring Diagram:

�Ensure the power is connected.

�Connect the

�

Name: Tel:

Luminaire Details:- Lamp Type—LED

ROUTINE TEST RECORD

Year 1 Year 2 Year 3 Year 4 Year 5

Monthly Test Date Date Date Date Date

Three Hour

BATTERY

BATTERY CHARGER

BATTERY CONNECTION

MAINS INPUT

CONNECTION

TEST BUTTON

CHARGE LED

These instructions should be read carefully and retained after installation by the end user for future

reference and maintenance.

These instructions should be used to aid installation of the following product:

EMTWINPC

GENERAL INSTRUCTIONS

SAFETY

INSTALLATION

• Installation of this luminaire should only be carried out by a qualiﬁed electrician or competent

person to the latest Building and current IEE Wiring Regulations (BS7671)

• Please isolate mains prior to installation/maintenance

• Check the total load on the circuit (including when this luminaire is ﬁtted) does not exceed the

rating of the circuit cable, fuse or circuit breaker

• Please note the IP (Ingress of Protection) rating of this luminaire when deciding the location for

installation

• Installing in areas where the temperature consistently drops below 0°C may shorten the battery life

• We recommend a minimum charge period of 24 hours before doing an emergency duration test

• This product is Class II, double insulated

• This product is non-dimmable

• This product is IP20 rated

• Connect the luminaire to the mains supply (via the terminal connector) ensuring the correct polarity

is observed (see Fig 2). Live (brown), Neutral (blue) and Earth (green and yellow). Note that the earth

on this PCB is non-functional.

• Connect the battery to the battery connector on the PCB (see Fig 2)

• Replace the front cover on the luminaire

• Switch on power supply and ensure the green LED indicator is illuminated

• The test button can be pressed to ensure the luminaire comes on (note this will only work when the

battery holds at least a small charge)

The LED lamps ﬁtted in this product are non-replaceable. The unit should be recycled in the correct

manner when it reaches the end of its life. Check local authorities for where facilities exist.

If the batteries have been left in a discharged state for any period of time, we recommend that several

charge and discharge cycles be performed to restore the battery to its full capacity.The batteries in this

ﬁtting are Nickel Cadmium and must be disposed of correctly.

Please contact the local authorities for the disposal of this toxic waste.

Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage

the ﬁtting.

• Provide power to the required point of installation. Suitable IP rated junction boxes should be used

where required

• With the aid of a slotted screwdriver remove the front cover to access the terminal block (See Fig 1)

• Feed the power cable into the luminaire and secure to required surface

This product has a warranty of 3 years (excluding battery) from date of purchase. Failure to install

this product in accordance with the current edition of the IEE Wiring Regulations, improper use,

or removal of the batch codes will invalidate the warranty. If this product should fail within its

warranty period it should be returned to the place of purchase for a free of charge replacement. ML

Accessories does not accept responsibility for any installation costs associated with the replacement

product. Your statutory rights are not affected. ML Accessories reserve the right to alter product

speciﬁcation without prior notice.

Fig 1

Fig 2

WARNING

GENERAL

Use slotted

screwdriver here



Fig2



•ConnectthebatterytothebatteryconnectoronthePCB(seeFig2)

•Placethefrontcoverbackontotheluminaire.

•SwitchonpowersupplyandensurethatthegreenLEDindicatorisilluminated

•Thetestbuttoncanbepressedtoensurethattheluminairecomeson(notethatthiswillonlyworkwhenthe

batteryholdsasmallamountofcharge)

GENERAL

TheLEDlampsfittedinthisproductarenonreplaceable.Theunitshouldberecycledinthecorrectmannerwhenit

reachestheendofitslife.Checklocalauthoritiesforwherefacilitiesexist.

Ifthebatterieshavebeenleftinadischargedstateforlongperiodoftime,werecommendthatoneormorechargeand

dischargecyclesarerequired.Thisshouldrestorethebatterytoitsfullcapacity.

ThebatteriesinthisfittingareNickelCadmiumandmustbedisposedofcorrectly.Pleasecontactthelocalauthoritiesfor

thedisposalofthistoxicwaste.

Cleanwithasoftdryclothonly,donotuseaggressivecleaningproductsorsolventswhichmaydamagethefitting.

Warranty

Thisproducthasawarrantyof3years(excludingbattery)fromdateofpurchase.Failuretoinstallthisproductin

accordancewiththecurrenteditionoftheIEEWiringRegulations,improperuse,orremovalofthebatchcodeswill

invalidatethewarranty.Ifthisproductshouldfailwithinitswarrantyperioditshouldbereturnedtotheplaceofpurchase

forafreeofchargereplacement.MLAccessoriesdoesnotacceptresponsibilityforanyinstallationcostsassociatedwith

thereplacementproduct.Yourstatutoryrightsarenotaffected.MLAccessoriesreservetherighttoalterproduct

specificationwithoutpriornotice.



N

Test

button

L

Battery

connector

E

Neutral(blue)

Earth(Greenandyellow)

(blue)

Live(brown)

LED

indicator

Earth (green and yellow)