Soundcore Liberty 2 Pro Manual de usuario
01 EN
Charging
• Slide to open or close the charging case to activate the LED battery indicator.
• Fully charge both the earbuds and the charging case before the rst use.
• To preserve battery lifespan, fully charge at least once every 45 days.
• To prevent damage, use the provided USB-C cable.
• You can charge the charging case by using a certied wireless charger (not provided).
• Fully dry off the earbuds and the USB port before charging.
< 30%
30% - 70%
> 70%
100%
Powering On/Off
Slide to open the charging case, the earbuds will automatically power on.
Place the earbuds back into the charging case and close the case, the earbuds will
automatically power off.
2
1
OFF
ON
LED indicators (Earbuds)
ON Steady white for 1 second
OFF Steady red for 1 second
• To manually power on, press and hold the multi-function button on either one of earbuds
for 1 second.
• To manually power off, press and hold the multi-function button on either one of earbuds
for 5 seconds.
Pairing
True Wireless Stereo Connection
Slide to open the charging case, the earbuds will automatically power on. The right earbud will
automatically connect with the left earbud.
EN 02
LED indicators (Earbuds)
Breathing white TWS connecting
Steady white for 1 second TWS connected
• When powered off, press and hold the multi-function button on both earbuds for 1
second, the earbuds will enter TWS connecting mode.
• When powered on and connected, place either one of the earbuds into the charging case
and close the case, you can keep using the other one.
• When powered on and connected, if either one of the earbuds is out of battery and
powered off, you can keep using the other one.
• When you are on a call, place either one of the earbuds into the charging case, the
microphone in the other earbud will be activated.
Bluetooth Pairing with your Device
The earbuds will enter pairing mode when powered on. You are requested to confirm the
connection when you see a pop-up.
2
13
Soundcore
Liberty 2 Pro
Soundcore
Liberty 2 Pro Bluetooth Pairing Request
“Headset” would like
to pair with your Phone
Cancel Pair
Pair
LED indiators (Earbuds)
Flashing white Bluetooth pairing
Steady white for 1 second Bluetooth connected
• In the pairing process, some devices are incompatible with Qualcomm True Wireless
Primary-Secondary dual pairing names, it may notice “connection unsuccessful” when you
tap “Pair” or even no screen pops up. Don’t worry and it will not inuence the using.
• Once successfully paired, the primary earbud connects with your device and transfers
signal to the secondary earbud, the latter one will not connect with your device. As a
result, in the Bluetooth pairing list on your device, it may indicate that only one side is
connected while the other side is not.
03 EN
To pair with another Bluetooth device, place the earbuds back into the charging case and
make sure they are being charged, keep the case cover open, then press and hold the button
on the charging case for 3 seconds. The LED indicator on the right earbud will ash rapidly.
3
Bluetooth Pairing Request
“Headset” would like
to pair with your Phone
Cancel Pair
Pair
Soundcore
Liberty 2 Pro
Soundcore
Liberty 2 Pro
3”
R
1 2
• Each time you power on your Soundcore earphones, it will automatically connect to your
last successfully connected device if available within the Bluetooth range.
• Mono mode: When Bluetooth connected, you can use either one of the earbuds only by
putting the other one back into the charging case and closing the cover.
Wearing
1. Choose the EarTips and EarWings that t your ears best.
2. Insert the earbuds into the inner canal of your ears.
3. Turn and nd the most comfortable position.
12 3
EN 04
Controls
All of the controls in stereo mode can be customized in the Soundcore App.
Play / Pause
L/R
1 Press (R/L)
Next track
R
2 Press twice (R)
Previous track
L
2 Press twice (L)
Volume up / down
• The volume up / down controls can be customized in
Soundcore App
• Control volume via the connected device
Answer / End a call
L/R
1Press (R/L)
Reject a call
L/R
1” Press and hold for 1 second (R/L)
Activate Siri or other voice
assistant software
L/R
Voice Assistant
1” Press and hold for 1 second (R/L)
05 EN
Soundcore App
Make sure the earbuds rmware is always up-to-date before using.
Download the Soundcore App for HearID, UI customization, EQ settings, and earbuds
rmware update.
• HearID: HearID maps your personal hearing sensitivity at multiple frequencies and analyzes
the results. It tailors the EQ settings and creates a personalized sound prole for you.
• UI customization: In stereo mode, all of the controls can be customized in the App. In
mono mode, the controls are xed.
• EQ settings: There’re more than 20 EQ settings you can choose in the App to optimize
your experience while enjoying different music genres.
• Earbuds rmware update: The earbuds rmware can be updated in the App. You will be
informed once the new version of firmware is detected when you connect the earbuds
with the App.
Soundcore
Apple and the Apple logo are trademarks
of Apple Inc.
Google Play and the Google Play logo are
trademarks of Google Inc.
Reset
Reset the earbuds if the earbuds cannot connect properly with each other or with your device.
Place the earbuds into the charging case and make sure they are being charged. Keep the
charging case open, then press and hold the button on the charging case for 10 seconds until
the LED indicators on both earbuds ash red 3 times.
All the memory data will be cleared.
1 2
10”
3
EN 06
Specifications
Specications are subject to change without notice.
Input 5 V 500 mA
Rated output power 5 mW @ 1% THD
Battery capacity 65 mA x 2 (earbuds); 500 mA (charging case)
Charging time 1.5 hours
Playtime (varies by volume level and
content) 8 hours (Totally 32 hours with the charging case)
Driver Dynamic and Balanced Armature
Frequency response 20 Hz - 20 kHz
Impedance 8 Ω
Bluetooth version V 5.0
Bluetooth range 10 m / 33 ft
Qualcomm® aptXTM Technical specications
Compression ratio: 4:1
Word depth: Support 16bit and 24bit
Decoding delay: Sample rate 48kHz<2ms
Dynamic range: 16bit>92dB, 24bit>120dB
Data rates: 352kbps
Decode mode: Stereo
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and
other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered
in the United States and other countries.
Otros manuales para Liberty 2 Pro
3
Tabla de contenidos
Otros manuales de Auriculares de Soundcore
Soundcore
Soundcore Liberty Air 3 PRO Manual de usuario
Soundcore
Soundcore Life A2 NC Manual de usuario
Soundcore
Soundcore Liberty 3 Pro Manual de usuario
Soundcore
Soundcore Life Q30 Manual de usuario
Soundcore
Soundcore Life P3 Manual de usuario
Soundcore
Soundcore Life Q35 Manual de usuario
Soundcore
Soundcore Life P3i Manual de usuario
Soundcore
Soundcore Liberty Neo Manual de usuario
Soundcore
Soundcore Life Note 3 Manual de usuario
Soundcore
Soundcore Space Q45 Manual de usuario
Soundcore
Soundcore Space A40 Manual de usuario
Soundcore
Soundcore Life Q35 Manual de usuario
Soundcore
Soundcore Liberty 2 Pro Manual de usuario
Soundcore
Soundcore Life Dot 2 NC Manual de usuario
Soundcore
Soundcore Liberty Lite Manual de usuario
Soundcore
Soundcore Liberty Air Manual de usuario
Soundcore
Soundcore Life Note Manual de usuario
Soundcore
Soundcore Liberty Air 2 Pro Manual de usuario
Soundcore
Soundcore Spirit Dot 2 Manual de usuario
Soundcore
Soundcore Soundcore Life P2 Manual de usuario
