Sound Projections OPT-500 Manual de usuario
Remote Control Func ons Only
To program MP3 tracks on USB key or Card.
1. Insert USB key or Card. Press PROG bu on to enter
program mode.
2. Press the I SKIP I bu ons to select folder. Press
PROG bu on again followed by I SKIP I bu ons for
desired track followed by PROG bu on. Repeat un l all
tracks are programmed.
3. To play programed tracks, press PLAY bu on.
(NOTE: to return to normal play mode from program
mode, press STOP bu on followed by PLAY bu on. To
return back to program mode press STOP bu on fol-
lowed by PROG bu on followed by PLAY bu on)
4. To clear programmed tracks, press PROG bu on fol-
lowed by STOP bu on.
(NOTE: Programed tracks will be erased upon power off
of the BlueTooth player)
INTRO bu on
Press INTRO bu on to play fi rst 10 seconds of track, then automa cally skip to next
track. Press I Play bu on to turn off INTRO
ID3 bu on
Press ID3 bu on to display the tle, ar st, or album on upper display line. Tracks
without this program informa on may display nothing.
560-0037 Rev 5 OPT-500 06/19
www.soundprojec ons.com
4
While track is playing, press the A-B bu on once at the beginning of the por on you
want to select (B will begin fl ashing in the display). Press the A-B bu on again to
select the end of the sec on you wish to playback. The selected sec on will then
play repeatedly. To return to normal play, press the A-B bu on again.
A-B Mode (use to select a por on of a track to playback repeatedly)
IR remote can only be controlled when standing behind speaker facing BT unit
Volume Control
VOL bu ons will control volume of BT/USB player from 0-30.
NOTE: Factory preset (recommended) volume is set at 30,
with all adjustments done with BT/USB Volume on rear panel.
All Func ons below work with USB or SD card ONLY.
User Guide
For OPT-500 BT/MP3 Player
1
BEFORE YOU BEGIN:
The OPT-500 BlueTooth device will also play forma ed MP3 fi les recorded to USB
key.
NOTE: If you plan to copy MP3 fi les from your iTunes directory, make sure your im-
port se ngs are correct. By default, iTunes imports fi les as .AAC, not .MP3. Please
follow the steps below to verify your iTunes se ngs:
- Open your iTunes program
- Click Edit > Preferences
- Under the “General Tab”, click the “Import Se ngs” bu on
- Verify “import using” > MP3 Encoder
By changing this se ng, all FUTURE imports will be saved as .MP3. Any fi les that
you have already saved in other formats will have to be converted to .MP3 before
they can be played in the OPT-500 player.
Built-in BlueTooth/MP3 Player with USB
This User Guide is for Sound Systems with the op onal built-in BlueTooth/
MP3 player (OPT-500). If your BlueTooth player does not look like the image
below, contact Sound Projec ons for the correct instruc ons for your player.
Opera ng the BlueTooth Player
1. Turn the sound system’s main power “on”.
2. BlueTooth Player will automa cally turn on when system is turned on.
3. To turn off player, push and hold Power bu on un l screen displays
“good bye”.
2
BlueTooth
Playback of MP3 tracks recorded to USB/SD Card
1. Insert a USB memory drive or SD card into the unit.
2. Press the FUNCT bu on un l the “USB” or “Card” is displayed
3. Press the PLAY bu on to begin play of fi rst MP3 track. (NOTE: If all MP3
tracks are in folders, playback will begin on fi rst track of fi rst folder)
4. To play a desired track: Press the FOLDER bu ons un l the spe-
cifi c folder is displayed. Press the I SKIP I bu ons to select specifi c
track. (NOTE: During playback, you may use the FOLDER bu ons
to change to other folders.)
5. While track is playing, press and hold I SKIP I bu ons to fast forward
or reverse scan.
!! NOTE: Be sure to turn the BT/USB player off before removing the USB key.
Repeat Mode
Press REPEAT bu on one or more mes to select one of the following
modes: Repeat Track, Repeat Folder (.MP3 mode only), Repeat All, Play All
Random, and Play All.
3
1. Press the FUNCT bu on un l “BLUETOOTH PARING” is displayed
(Note: “Audio BlueTooth” will be displayed on your BlueTooth playback
device)
2. If your playback device does not automa cally pair with the BT-500,
press the II Pair bu on to match with your BT device.
3. Press the II Pair bu on for 3 seconds To disconnect device to allow for
diff erent device.
Recommenda on: We recommend you set you BT playback device at
75-80% volume and then adjust the BT/MP3 player knob on rear panel.
Features: The STOP, II PLAY, and SKIP bu ons will control your
BT playback device. (CAUTION: When using these bu ons, a “BEEP” will be heard
over the sound system)
Play 1
Press PLAY 1 bu on while track is playing, and audio will stop once track is
fi nished. Press PLAY 1 bu on again to return to normal play.
All Func ons below work with USB or SD card ONLY.
Otros manuales de Reproductor de MP3 de Sound Projections
