Sony Wega KV-AZ212 Manual de usuario

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

Tr initron Color TV

KV-AZ212

2-687-422-E2 (1)

Operating Instructions

•Before operating the unit, please read this manual thoroughly and retain

it for future reference.

M91

01GB01COV-SOEMRus.p65 5/15/07, 2:05 PM1

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

110-240 V AC, 50/60 Hz

Indicated on the rear of the TV

B/G, I, D/K, M

PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43

NICAM Stereo/Bilingual B/G, I, D/K;

A2 Stereo/ Bilingual B/G

English, Russian

VHF : E2 to E12 /UHF : E21 to E69 /

CATV : S01 to S03, S1 to S41

UHF : B21 to B68 /CATV : S01 to S03, S1 to S41

VHF : C1 to C12, R1 to R12 /

UHF : C13 to C57, R21 to R60 /

CATV : S01 to S03, S1 to S41, Z1 to Z39

VHF : A2 to A13 /UHF : A14 to A79 /

CATV : A-8 to A-2, A to W+4, W+6 to W+84

75-ohm external terminal

10 W + 10 W

Input: 2 Output: 1 Phono jacks; 1 Vp-p, 75 ohms

Input: 3 Output: 1 Phono jacks; 500 mVrms

Input: 1 Y: 1 Vp-p, 75 ohms,

unbalanced, sync negative

C: 0.286 Vp-p, 75 ohms

Input: 1 Phono jacks;

Y: 1 Vp-p, 75 ohms,

sync negative

CB: 0.7 Vp-p, 75 ohms

CR: 0.7 Vp-p, 75 ohms

Output: 1 Stereo minijack

87.5 - 108.0 MHz

10.7 MHz

21 in.

Measured diagonally

589 ×472 ×515

ASpecifications

NoteKV-AZ212M91

Design and specifications are subject to change without notice.

Made in Malaysia.

Sony Corporation

1-7-1 Konan, Minato-ku,

Tokyo 108-0075, Japan.

Power requirements

Power consumption (W)

Television system

Color system

Stereo/Bilingual system

Teletext language

Channel coverage

B/G

D/K

8 (Antenna)

Audio output (Speaker)

Number of terminal

(Video)

(Audio)

(S Video)

(Component

Video)

i(Headphone)

FM Radio

Tuning Range

Intermediate

Frequency

Picture tube

Tube size (cm)

Screen size (cm)

Dimensions (w/h/d, mm)

Mass (kg)

http://www.sony.net/

01GB02WAR-SOEMRus.p65 5/15/07, 2:05 PM2

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

Clean the TV with a dry and soft

cloth. Do not use benzine, thinner,

or any other chemicals to clean the

TV. Do not attach anything (e.g.,

adhesive tape, cellophane tape,

glue) on the painted cabinet of the

TV. Do not scratch the picture

tube.

BWARNING

• Dangerously high voltages are present inside the TV.

• TV operating voltage: 110 – 240 V AC.

•Do not plug in the power cord until you have completed making all other

connections; otherwise a minimum leakage current might flow through the antenna

and other terminals to ground.

•To avoid battery leakage and damage to the remote, remove the batteries from the

remote if you are not going to use it for several days. If any liquid leaks from the

batteries and touches your skin, immediately wash it away with water.

Install the TV on a stable TV stand

and floor which can support the

TV set weight. Ensure that the TV

stand surface is flat and its area is

larger than the bottom area of the

TV.

Do not plug in too many

appliances to the same power

socket. Do not damage the power

cord.

For children’s safety, do not leave

children alone with the TV. Do not

allow children to climb onto it.

For your own safety, do not touch

any part of the TV, the power cord

and the antenna cable during

lightning storms.

Do not place any objects on the TV.

The apparatus shall not be

exposed to dripping or splashing

and that no objects filled with

liquids, such as vases, shall be

placed on the apparatus.

Do not operate the TV if any liquid

or solid object falls into it. Have it

checked immediately by qualified

personnel only.

Do not block the ventilation

openings of the TV. Do not install

the TV in a confined space, such

as a bookcase or built-in cabinet.

Do not open the cabinet and the

rear cover of the TV as high

voltages and other hazards are

present inside the TV. Refer

servicing and disposal of the TV

to qualified personnel.

Pull the power cord out by the

plug. Do not pull the power cord

itself. Even if your TV is turned

off, it is still connected to the AC

power source (mains) as long as

the power cord is plugged in.

Unplug the TV before moving it

or if you are not going to use it for

several days.

To prevent fire or shock hazard, do

not expose the TV to rain or

moisture.

Your TV is recommended for

home use only. Do not use the TV

in any vehicle or where it may be

subject to excessive dust, heat,

moisture or vibrations.

01GB02WAR-SOEMRus.p65 5/15/07, 2:05 PM3

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

Insert the batteries (supplied) into the remote.

Note

•Do not use old or different types of batteries together.

Connect the antenna cable (not supplied) to 8

(antenna input) at the rear of the TV.

Tips

•Your TV can receive both TV and FM radio signals from the

appropriate connections through the 8(antenna input)

terminal (see E).

•You can also connect your TV to other optional components

(see E).

Plug in the power cord, then press !on the TV to turn

it on.

Note

• The 1(standby) indicator flashes green for a few seconds

when turning on the TV. This does not indicate a malfunction.

Set up the TV by following the instructions of the

“Начальная настройкa” (“Initial Setup”) menu

(see D).

CGetting Started

Step 1

Step 2

Step 3

Step 4

01GB02WAR-SOEMRus.p65 5/15/07, 2:05 PM4

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

Program Sorting/Edit

Off

Sorting mode

PROG

SkipLabel

Off01

Exit

Select Confirm

Program Sorting/Edit

Off

Sorting: Edit:

PROG

SkipLabel

Exit

Select Confirm

Setting up your TV (“Initial Setup”)

When you turn on your TV for the first time, the “Начальная настройкa”

(“Initial Setup”) menu will appear. You may change the menu language, preset

the TV channels automatically, sort or edit the channels and adjust the picture

position using the buttons on the remote control or TV top control panel.

1Press V or vto select the desired menu

language, then press .

The selected menu language appears.

2Press V or vto select “Yes”, then press to

preset the channels automatically.

The screen will indicate automatic

presetting is in progress.

After all available channels have been tuned

and stored, the “Program Sorting/Edit”

menu appears automatically on the screen.

To skip automatic channel presetting, select

“No”, then press .

If the message “No channel found. Please

connect cable/antenna” appears, check your

TV connections, then press .

3The “Program Sorting/Edit” menu enables

you to sort and edit the channels.

a) If you wish to keep the channels in the current

condition, press WEGA GATE to exit.

b) Press Vor vto select the program

number with the channel you wish to

change. The selected channel will appear

on the screen.

c) If you wish to store the channels in a

different order:

1) Press bto enter sorting mode.

2) Press Vor vto select the new program

number position for your selected

channel, then press B.

End

Select Confirm

End

Select Confirm

Program:

TV System: Auto

VHF Low

End

01GB02WAR-SOEMRus.p65 5/15/07, 2:05 PM5

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

d) If you wish to edit the channels, press

to change to edit mode.

Press buntil the mode that you wish to edit

is highlighted: Label, Skip, (block symbol).

Then press .

1) To label, press Vor vto select the

alphanumeric characters for the label.

Then press .

2) To skip the program number, press Vor vto

select “On”. Then press .

You can skip this program number when

using PROG +/–.

3) To block unwanted program number,

press Vor vto select . Then press .

e) Repeat step b) to d) if you wish to change other

channels.

Press WEGA GATE to go to the next menu.

4Press B or bto adjust the bars on the top

and bottom of the menu if they are

slanted, then press .

If no adjustment is necessary, then press .

5To prevent this “Initial Setup” menu from

appearing again when you turn on the TV

by pressing !, press V or vto select “No”,

then press .

To allow this menu to appear again, select

“Yes”, then press .

Tip

•You can immediately go to the end of the ”Initial Setup” menu by pressing WEGA GATE.

End

Select Confirm

Picture Rotation

Select Confirm

Display this menu next time?

Yes

Initial Setup

Exit

Select Confirm

Program Sorting/Edit

Edit mode

Label Skip

PROG

Off

Setting up your TV (“Initial Setup”) (continued)

Exit

Select Confirm

Program Sorting/Edit

Edit mode

Label Skip

PROG

Off

Exit

Select Confirm

Program Sorting/Edit

Edit mode

Label Skip

PROG

Off

01GB02WAR-SOEMRus.p65 5/15/07, 2:05 PM6

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

EConnecting optional components

Connecting to the video input terminal ( t)

Notes

• If you connect a VCR to 8(antenna input), preset the signal output from the VCR to the

program number 0 on the TV (see M).

• When both (S video) and (video) for t1 are connected at the same time,

(S video) is automatically selected. To view (video), disconnect the S video cable.

TV front panel

Antenna cable

(not supplied)

DVD player

TV rear panel

Audio/

Video cable

(not supplied)

Audio/Video cable

(not supplied)

Camcorder

S Video cable

(not supplied)

Antenna cable

(not supplied)

TV, CATV, Satellite

When there is no

FM signal

Antenna

selector

FM signal

TV signal

VCR

(MONO)

(

MONO)

(

MONO)

01GB03INS-SOEMRus.p65 5/15/07, 2:04 PM7

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

DVD player

TV rear panel

Component video

cable

(not supplied)

Audio cable

(not supplied)

(MONO)

Connecting to the component video input terminal ( )

Notes

•If your DVD player can output interlace and progressive mode signals, select the interlace

output when connecting to (component video input) on your TV. Your TV can receive

either 525i/60Hz or 625i/50Hz interlace signals.

•The component video terminals on your DVD player are sometimes labeled Y/CB/CR, Y/PB/

PR, Y/Cb/Cror Y/B-Y/R-Y.

• If you select “DVD” on your TV screen, the signal from the T(monitor output) jacks will not

be output properly. This does not indicate a malfunction.

TV rear panel

Audio system

(

MONO)

(

MONO)

VCR

Audio/Video

cable

(not supplied)

Connecting to the monitor output terminal ( T )

Connecting optional components (continued)

01GB03INS-SOEMRus.p65 5/15/07, 2:04 PM8

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

FTroubleshooting

If you find any problem while viewing your TV, you can either use the “Factory

Settings” function or check the Troubleshooting guide below. If the problem

persists, contact your Sony dealer.

“Factory Settings” function

Press the WEGA GATE button. Choose “Settings” and go to “Setup” ( )

menu. From “Setup” menu, select “Factory Settings”. Then select “Yes” and

press . Your TV will go blank for a few seconds, then the “Initial Setup”

menu will appear. Your TV will be set to factory settings, but certain problems

may be solved.

Snowy picture,

noisy sound

Distorted picture,

noisy sound

Good picture,

noisy sound

No picture,

no sound

Good picture,

no sound

Dotted lines or

stripes

Double images

or “ghosts”

No color

Symptom Solutions

•Check the antenna cable and connection on the TV, VCR and at the wall

(see E).

•Check the antenna setup. Contact a Sony dealer for advice.

•Display the “Channel Setup” menu and select “Manual Program” to preset

the channel again (see M).

•Display the “Channel Setup” menu and set the “Signal Booster” to “Auto”

from “Manual Program” (see M).

•Try using an external booster.

•Turn off or disconnect the external booster if it is in use.

•Display the “Channel Setup” menu and set the “Signal Booster” to “Off”

from “Manual Program” (see M).

•Display the “Channel Setup” menu and select the appropriate

“TV System” from “Manual Program” (see M).

•Check the power cord, antenna and VCR connections (see E).

•Press ?/1 (power) to turn on the TV (see G).

•Press !(main power) on the TV to turn off the TV for about five seconds,

then turn it on again (see H).

•Press 2+ to increase the volume level (see G).

•Press to cancel the muting (see G).

• Do not use a hair dryer or other equipment near the TV.

•Check the antenna setup. Contact a Sony dealer for advice.

•Use a highly directional antenna.

•Use the fine tuning (“Fine”) function (see M).

•Check the antenna setup. Contact a Sony dealer for advice.

•Turn off or disconnect the external booster if it is in use.

•

Display the “Picture” menu and select “Custom” from “Picture Mode”, then

adjust the “Color” level from “Picture Adjustment” (see

•Display the “Setup” menu and check the “Color System” setting

(usually set this to “Auto”) (see N).

•Check the antenna setup. Contact a Sony dealer for advice.

01GB03INS-SOEMRus.p65 5/15/07, 2:04 PM9

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

Picture slant

Abnormal color

patches

Teletext display

is incomplete

(snowy picture

or double images).

TV cannot receive

stereo broadcast

sound.

Stereo broadcast

sound switches on

and off or is

distorted.

TV cannot receive

FM radio station.

The 1(standby)

indicator on your

TV flashes red

several times after

every three

seconds.

The TV screen

sometimes goes

blank for

slightly longer

than usual

during channel

change.

TV cabinet creaks.

A small “boom”

sound is heard

when the TV is

turned on.

•Keep external speakers or other electrical equipment away from the TV.

•Display the “Setup” menu and adjust “Picture Rotation” so that the

picture position is optimal (see N).

• Keep external speakers or other equipment away from the TV. Do not

move the TV while the TV is turned on. Press !(main power) on the TV

to turn off the TV for about 15 minutes, then turn it on again to

demagnetize the TV.

•Check the antenna cable and connection on the TV, VCR and at the wall

(see E).

•Check the antenna setup. Contact a Sony dealer for advice.

•Display the “Channel Setup” menu and set the “Signal Booster” to “Auto”

from “Manual Program” (see M).

•Try using an external booster.

•Use the fine tuning (“Fine”) function (see M).

•Check the antenna cable and connection on the TV, VCR and at the wall

(see E).

•Check the antenna setup. Contact a Sony dealer for advice.

•Connect a separate FM antenna and the TV channel source through an

antenna selector (switch) to your TV (see E).

•Count the number of times the 1(standby) indicator flashes.

Press !(main power) to turn off your TV. Contact your nearest Sony

service center.

•The “Signal Booster” is functioning to detect a weak signal. This does not

indicate a malfunction.

•Changes in room temperature sometimes make the TV cabinet expand or

contract, causing a noise. This does not indicate a malfunction.

•The TV’s demagnetizing function is working. This does not indicate a

malfunction.

Symptom Solutions

Troubleshooting (continued)

01GB03INS-SOEMRus.p65 5/15/07, 2:04 PM10

Black

Otros manuales para wega KV-AZ212

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de TELEVISOR de Sony

Sony

Sony BRAVIA KLV-40S550AE Manual de usuario

Sony

Sony KV-27FV310 - 27" Fd Trinitron Wega Manual de usuario

Sony

Sony KV-30XBR910 Manual de usuario

Sony

Sony KV-32FX65U Manual de usuario

Sony

Sony KDL-32BX305 Manual de usuario

Sony

Sony TRINITRON KV-2565MT Manual de usuario

Sony

Sony BRAVIA KDL-32BX320 Manual de usuario

Sony

Sony WEGA KV 32HV600 Manual de usuario

Sony

Sony WEGA KV-BZ21 Manual de usuario

Sony

Sony Bravia KDL-65W950B Manual de usuario

Sony

Sony Trinitron KV-13M42 Manual de usuario

Sony

Sony Trinitron KD-32NX200AUS Manual de usuario

Sony

Sony Bravia KDL-55W802A Manual de usuario

Sony

Sony TRINITRON KV-9400 Manual de usuario

Sony

Sony TRINITRON KV-ES34M31 Manual de usuario

Sony

Sony KD-27FS170, KD-32FS170, KD-36F Manual de usuario

Sony

Sony Bravia KDL-32CX520 Manual de usuario

Sony

Sony Trinitron KV-27XBR96S Manual de usuario

Sony

Sony WEGA KV-HW21 Manual de usuario

Sony

Sony KV-EF29N90 Manual de usuario

Sony

Sony KDP-51WS550 - 51" High Definition Projection... Guía de instalación

Sony

Sony Bravia KDL-40V4000 Manual de usuario

Sony

Sony KV-1946R Manual de usuario

Sony

Sony Grand Wega KF-50SX200U Manual de usuario

Manuales populares de TELEVISOR de otras marcas

Philips

Philips Colour Television Manual de usuario

Toshiba

Toshiba 27A10 Manual de usuario

Philips

Philips 42PF9630A/37 Manual de usuario

Hitachi

Hitachi 32FX48B Manual de usuario

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manual de usuario

Changhong Electric

Changhong Electric uhd55b6000is Manual de usuario

Philips

Philips Matchline 21CE7551 Manual de usuario

Panasonic

Panasonic Genus TX-G10 Manual de usuario

Toshiba

Toshiba 19A20 Manual de usuario

Philips

Philips 25PT4523-16 Manual de usuario

Philips

Philips PR0930X3 Manual de usuario

Philips

Philips Brilliance 231P4QPY Manual de usuario

Samsung

Samsung 55S9 B Series Manual de usuario

Philips

Philips 32HF9385D Guía de solución de problemas

Sharp

Sharp LC-40FI5012E Manual de usuario

Loewe

Loewe Table Stand Reference 55 Manual de usuario

Philips

Philips 32PFH5300 Manual de usuario

Sylvania

Sylvania 6427FB Manual de usuario

Sony wega KV-AZ212 Manual de usuario

Manuales populares de TELEVISOR de otras marcas