Sony Trinitron KD-32NX200AUS Manual de usuario

4-102-518-12(1)

KD-32NX200AUS

Operating Instructions

Before operating the TV, please read the ‘Safety Information’ section of this

manual. Retain this manual for future reference.

Trinitron

Integrated Digital

Television

410251812

Thank you for choosing this

FD Trinitron Integrated

Digital Television

Before operating the TV, please read this instruction

manual thoroughly and retain it for future reference.

All instructions in this manual refer to buttons on the

supplied remote control unless stated otherwise.

The model and serial numbers are located on the back

of the TV. Record the serial number in the space

provided below. Refer to these numbers whenever

you call your dealer regarding this product.

Model No. KD-32NX200AUS

Serial No. ______________

Please note: The information in this manual was correct at the time of

going to print. However, some minor changes may have been made late

in the product’s development. All illustrations in this manual have been

created during the product’s development and may differ slightly to the

finished product.

TRINITRON COLOUR TV

32NX200AUS

SER. No.

6000001

MANUFACTURED IN UK

PRODUCT BY SONY CORP

TOKYO / JAPAN

MODEL NO. KD-

220-240V 50/60Hz 154W

N50

Serial No.

Table of Contents

Table of Contents 1

Table of Contents

Safety Information

Safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Getting Started

Checking the supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Inserting batteries into the remote control . . . . . . . . . . . . . . . . . . . . . . 3

Connecting an aerial and VCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Switching on the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Automatically tuning the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Switching between digital and analogue mode . . . . . . . . . . . . . . . . . . 5

Adjusting the Brightness, Colour and Sharpness settings . . . . . . . . . . 6

Adjusting the sound settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Basic Operation

Overview of the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Overview of the TV buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Everyday use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Screen Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Digital Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Analogue Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Advanced Operation

The Channel Index menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

The Digital Electronic Programme Guide (EPG) . . . . . . . . . . . . . . . . . 15

The Info menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

The Main menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Detail Set-up menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Using the TV menu system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Picture Adjustment menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Sound Adjustment menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Features menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Set Up menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Manual Set Up menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Manual Programme Preset menu. . . . . . . . . . . . . . . . . . . . . . . . . 24

Further Programme Preset menu . . . . . . . . . . . . . . . . . . . . . . . . . 24

Connecting Other Equipment

Overview of the rear sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Overview of the front sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Connecting other equipment to the TV. . . . . . . . . . . . . . . . . . . . . . . . . 27

Connecting HD equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Viewing pictures from equipment connected to the rear sockets. . . . . 27

Viewing pictures from equipment connected to the front sockets . . . . 27

Remote control of other equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Programming the remote control. . . . . . . . . . . . . . . . . . . . . . . . . . 28

Controlling a DVD player. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Controlling a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Additional Information

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

How to lift the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back cover

Safety Information

2Safety Information

This set is to operate on a 220-240V AC

supply only. Take care not to connect too

many appliances to the same power socket

as this could result in fire or electric shock.

For environmental and safety reasons, it is

recommended that the TV is not left if

standby when unused. Disconnect from the

mains. However, some TVs may have

features which need the TV to be left in

standby to work correctly. The instructions

in this manual will inform you if this applies.

Never push objects of any kind into the set

as this could result in a fire or electric shock.

Never spill liquid of any kind on the set. If

any liquid or solid object does fall through,

do not operate the TV. Have it checked

immediately by qualified personnel.

Do not open the cabinet and the rear cover

of the TV. Refer to qualified service

personnel only.

To prevent fire or shock hazard, do not

expose the TV to rain or moisture.

For your own safety, do not touch any part

of the TV, power lead or aerial lead during

lightning storms.

Do not cover the ventilation openings of the

TV. For ventilation, leave a space of at least

10cm all around the set.

Never place the TV in hot, humid or

excessively dusty places. Do not install the

TV where it may be exposed to mechanical

vibrations.

Clean the screen and cabinet with a soft,

lightly dampened cloth. Do not use any type

of abrasive pad, alkaline cleaner, scouring

powder or solvent, such as alcohol or

benzine, or antistatic spray. As a safety

precaution, unplug the TV before cleaning it.

Pull out the power lead by the plug. Do not

pull on the power lead itself. Take care not to place heavy objects on the

power lead as this could result in damage.

We recommend you wind any excess lead

around the holders provided on the rear of

the TV.

Unplug the power lead before moving the

TV. Avoid uneven surfaces, quick steps or

excessive force. If the set has been

dropped or damaged, have it checked

immediately by qualified service personnel.

Do not cover the ventilation openings of the

TV with items such as curtains or

newspapers etc.

Do not place any objects on the TV. To

prevent fire, keep inflammable objects or

naked lights (e.g. candles) away from the TV.

Place the TV on a secure stable stand. Never

attempt to move the TV and stand together -

always move the TV and stand separately.

Do not place the TV on its side or face up. Do

not allow children to climb on to it.

Getting Started

Getting Started 3

Follow steps 1 - 8 to install the TV and view programmes

Check that you have the following items:

• Always observe the correct polarity when inserting batteries.

• Please dispose of batteries in an environmentally friendly way.

• Do not use old or different types of batteries together.

• To avoid battery leakage and damage to the remote control, remove the

batteries if you are not going to use the remote for several days. If any liquid that

has leaked from the batteries touches you, wash it away immediately with water.

Batteries

Checking the supplied accessories

Inserting batteries into the remote control

RF lead

Remote control

Scart lead

Scart adaptor

MADE IN INDONESIA FABRIQUÉ EN INDONÉSIE

AAA LR03 AM4 1.5V

MADEIN INDONESIA FABRIQUÉENINDONÉSIE

AAA LR03 AM4 1.5V

Coin

DIGITAL/a

GUIDE

MODE

INDEX

Getting Started

4Getting Started

1. Connect your aerial lead to the socket labelled DIGITAL on the rear of

the TV.

2. Connect the supplied RF lead from the socket labelled on the rear of

the TV to the socket labelled IN* on your VCR.

3. Connect an RF lead from the socket labelled OUT* on your VCR to the

socket labelled ANALOGUE on the rear of the TV.

4. Connect the supplied scartlead from thesocket labelled i3/r3 on the

rear of the TV to the audio/video sockets labelled TV* on your VCR.

5. Insert a pre-recorded tape into the VCR and press the ‘PLAY’ button.

This enables the TV to locate and store the video channel during the

‘Automatically tuning the TV’ procedure.

Connecting an aerial only

1. Connect your aerial lead to the socket labelled DIGITAL on the rear of

the TV.

2. Connect the supplied RF lead from the sockets labelled and

ANALOGUE on the rear of the TV.

z*Socket names may vary depending on make and model of VCR. Refer to your

VCR instruction manual for details.

Supplied RF lead

Rear of VCR

Supplied Scart lead

V/L/R connectors

Rear of TV

Connecting an aerial and VCR

Y/U/V connectors

Getting Started

Getting Started 5

1. When you switch on the TV for the first time, the Sony logo is displayed

on the TV screen, followed by the ‘Picture Rotation’ prompt. Sometimes

the Earth’s natural magnetism can cause the screen to look slanted.

a) If no correction is required, press Bto select ‘Not Necessary’.

b) If some correction is required, press OK to select ‘Adjust now’.

Press Vor vto correct the slant. Press OK to confirm.

2. The ‘Autotune’ prompt appears on the TV screen. Press OK to select

‘Yes’.

3. The ‘Region Set-up’ menu appears on the TV screen. Press Vor vto

highlight your chosen region. Press OK to confirm.

The digital autotune display appears on screen and the TV starts to

search for all the available digital channels. This may take some time,

please be patient and do not press any buttons on the TV or remote

control.

If no digital or analogue channels are found, a message appears asking

to confirm that the aerial is connected correctly. Check all the aerial

connections and press OK to start the automatic tuning process again.

When the digital autotune is complete, the analogue autotune starts to

search for all the available analogue channels.

Once all available digital and analogue channels have been stored, the

TV returns to normal operation, displaying the digital channel stored on

channel number 1. If no digital channels were found, the analogue

channel stored on channel number 1 is displayed.

The TV has now tuned

in all the available channels

1. Press the DIGITAL/abutton to switch between digital and analogue

mode.

In digital mode, an information banner appears briefly on screen when

the channel is changed.

In analogue mode, the channel number appears in green lettering when

the channel is changed.

Switching between digital and analogue mode

The ‘Autotune’ prompt.

Automatically tuning the TV

The ‘Picture Rotation’ prompt.

Do you want to start

automatic tuning?

Yes:

No:

The ‘Region Set-up’ menu.

Digital Set-up

Region Set-up

Press OK key to set your region

NEW SOUTH WALES / AUSTRALIAN CAPITALTERRITORY

VICTORIA

QUEENSLAND

SOUTH AUSTRALIA

WESTERN AUSTRALIA

TASMANIA

Back

NORTHERNTERRITORY

If picture slants, please

adjust picture rotation.

Not Necessary:

Adjust Now:

1. Connect the TV plug to your mains socket (220 - 240V AV, 50Hz)

2. Push in the On/Off button (labelled !) on the front of the TV.

z If the red standby mode indicator on the front of the TV is lit, press the TV I/1

button on the remote control to switch on the set. Please be patient as the picture

may take a few moments to appear on the TV screen.

Switching on the TV

100Hz

DigtialPlus

On/Off

button

Getting Started

6Getting Started

This TVhas fourpicture mode settings, ‘Live’, ‘Personal’, ‘Movie’ and ‘Game’. ‘Live’,

‘Movie’ and ‘Game’ are preset modes and only the ‘Contrast’ setting can be

adjusted. ‘Personal’ mode however, also allows you to adjust the ‘Brightness’,

‘Colour’ and ‘Sharpness’ settings.

This TV has four sound settings, ‘Personal’, ‘Dolby V*, ‘Dynamic**’ and ‘Natural**’

1. Press the MENU button on the remote control to display the TV menu

system on the TV screen.

2. Press the bbutton to enter the ‘Picture Adjustment’ menu.

3. The ‘Picture Mode’ option is highlighted. Press the bbutton.

4. Press the Vor vbutton to highlight ‘Live’, ‘Personal’, ‘Movie’ or ‘Game’.

Press the OK button to confirm.

5. a) If you have selected ‘Live’, ‘Movie’ or ‘Game’:

Go to step 6.

b) If you have selected ‘Personal’:

You can now adjust the ‘Brightness’, ‘Colour’ and ‘Sharpness’ settings.

(Sharpness is not adjustable in digital mode).

Press the Vor vbutton to highlight ‘Brightness’, ‘Colour’ or ‘Sharpness’.

Press the bbutton. Press the Bor bbutton to adjust the setting. Press

the OK button to store.

6. Press the MENU button to exit the TV menu system and return to normal

TV operation.

1. Press the MENU button on the remote control to display the TV menu

system on the TV screen.

2. Press the vbutton to select the ‘Sound Adjustment’ menu.

3. Press the bbutton to enter the ‘Sound Adjustment’ menu.

4. The ‘Sound Effect’ option is highlighted. Press the bbutton.

5. Press the Vor vbutton to highlight ‘Personal’, ‘Dolby V’, ‘Dynamic’ and

‘Natural’ Press the OK button to confirm.

6. a) If you have selected ‘Dolby V’, ‘Natural’ or ‘Dynamic’:

Go to step 7.

b) If you have selected ‘Personal’:

You can now adjust the sound using the ‘Equaliser Adjustment’ option.

With the ‘Equaliser Adjustment’ option highlighted, press bto adjust.

Press Bor bto select the required frequency band. Press Vor vto adjust

the frequency level. Press OK to confirm.

7. Press the MENU button to exit the TV menu system and return to normal

TV operation.

Adjusting the Brightness, Colour and Sharpness settings

Adjusting the sound settings

The ‘Picture Adjustment’ menu.

The ‘Sound Adjustment’ menu.

z*When ‘Dolby V’ is selected, the TV

simulates the full effects of Dolby Pro

Logic Surround sound without the need

for additional speakers. Manufactured

under licence from Dolby Laboratories.

‘Dolby’, ‘Pro Logic’ and the ; symbol

are trademarks of Dolby Laboratories.

**’Dynamic’ and ‘Natural’ are functions

of the ‘BBE High Definition Sound

System’. This system enhances clarity,

detail, presence of sound and increased

musical realism.

Sound Adjustment

Sound Effect

Equaliser

Adjustment

Virtual Effect

Balance

AutoVol. Control

Dual Sound

Select: Enter:

/Audio-outVol.

iDual Sound

Stereo

Off

Stereo

DolbyV

Picture Adjustment

PersonalPicture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

DRC-MF

ColourTone

Auto

DRC1250

Cool

Select: Enter:

Basic Operation

Basic Operation 7

Overview of the remote control

1% - Mute button

Press to mute the TV sound. Press again to restore.

2VIDEO I/1- VCR/DVD Standby button

Press to switch off your VCR/DVD player temporarily. Press again to return to

normal operation.

3TV I/1- TV Standby button

Press to switch off the TV temporarily. The red standby indicator on the front of the

TV is lit. Press again to return to normal operation.

4- Screen Mode button

Press to change the screen mode. Refer to page 10.

5DIGITAL/a- Digital/Analogue mode, TV button

In TV mode: Press to switch between digital and analogue mode.

In analogue text, video input mode, TV menu system, INFO menu, EPG and

Channel Index menu: Press to return to normal TV operation.

6/ -Input Select/Text Hold button

In TV mode: Press to view signals from equipment connected to the TV sockets.

Refer to page 27 .

In analogue text mode: Press to hold the current page. Refer to page 13.

7Numbered buttons

In TV mode: Press to select the required channel number. For channel numbers 10

and above, enter the second digit within two seconds.

In analogue text mode: Press to enter the three digital page number. Refer to page 13.

8GUIDE - Guide button

In digital TV mode: Press to access digital text and interactive services (depending

on availability).

9- Previous channel button

In analogue TV mode: Press to return to the previous channel watched (provided

that the channel was watched for more than five seconds).

In digital TV mode: Press to remove any interactive prompts from the TV screen.

In digital text mode: Press to cancel a selection/go back a step. Refer to page 12

q; MODE - Remote control mode selector

This remote control can be programmed to operate the basic functions of most DVD

players and VCRs. Once programmed, press this button repeatedly to select TV,

VCR or DVD mode. Refer to page 28.

qa •REC - VCR RECORD button

With the remote control in VCR mode: Press to start your VCR’s RECORD function

qs /- Text button

In digital TV mode: Press to access digital text. Refer to page 12.

In analogue TV mode: Press to access analogue text. Refer to page 13.

qd INDEX - Channel Index button

In digital TV mode: Press to access the Channel Index menu. Refer to page 14.

qf - EPG button (Electronic Programme Guide)

In digital TV mode: Press to access the Digital EPG. Refer to page 15.

qg - INFO button

In digital TV mode: Press to access the Info menu. Refer to page 17.

In analogue TV mode: Press to display information such as current channel number

and screen mode. Press again to cancel.

qh OK button

In TV menu system: Press to confirm a selection. Refer to page 20.

In digital TV mode: Press to access the Channel Index menu. Refer to page 14.

In analogue TV mode: Press to access the Programme Index table. Press the

button

to highlight an analogue channel. Press the

button to display the chosen channel.

qj V, v, Band bbuttons

In TV menu system: Press to move through the options. Refer to page 20.

qk Coloured buttons

In digital menu systems: Press to select the options at the bottom of the screen in

the Info, Main, Channel Index and EPG digital menus.

In analogue text mode: Press to use Fastext. Refer to page 13.

ql 2+/- Volume buttons

Press to increase (+) or decrease (-) the TV volume.

w; PROG +/- buttons

In TV mode: Press to view the next (+) or previous (-) channel.

In analogue text mode: Press to view the next (+) or previous (-) page. Refer to page 13.

wa MENU button

Press to access the TV menu system. Refer to page 20.

DIGITAL/a

GUIDE

MODE

INDEX

8 9

q; qa

qs qd

qf qg

ql w;

Basic Operation

8Basic Operation

10- Reset button

Press to return picture and sound levels to the factory settings.

2t- Video Input button

Press to view pictures from equipment connected to the TV sockets.

32+/- buttons

Press to increase (+) or decrease (-) the TV volume.

4PROG +/- buttons

In TV mode: Press to view the next (+) or previous (-) channel.

5!- On/Off button

Press to switch the TV on or off.

Overview of the TV buttons

100Hz

DigtialPlus

100Hz

Digital Plus

Press gently on the symbol to open the door.

4 4 o4

51 2 3 4

4 4 o4

Tabla de contenidos

Otros manuales de TELEVISOR de Sony

Sony

Sony BRAVIA KD-55X75K Manual de usuario

Sony

Sony Wega Trinitron KV-27FS13 Manual de usuario

Sony

Sony KDL S2000 Series Manual de uso y cuidado

Sony

Sony KV-32LS65AUS Manual de funcionamiento

Sony

Sony Bravia KD-50X8 K Series Manual de usuario

Sony

Sony KDL-32S5600 Manual de usuario

Sony

Sony BRAVIA XR-85X90K Manual de usuario

Sony

Sony Trinitron KV-29F3A Manual de usuario

Sony

Sony KD-55S8500D Manual de usuario

Sony

Sony PlasmaPro FWD-42PV1 Instrucciones de uso

Sony

Sony KDL-26U4000 Manual de usuario

Sony

Sony wega KV-AZ212 Manual de usuario

Sony

Sony BRAVIA XBR-55X700D Manual de usuario

Sony

Sony BRAVIA KDL-26S2000 Manual de usuario

Sony

Sony FD Trinitron KV-28FQ75 U Manual de usuario

Sony

Sony Bravia KDL-60W600B Manual de usuario

Sony

Sony FD Trinitron WEGA KV-32FS12 Manual de usuario

Sony

Sony Trinitron WEGA KV-DB34 Manual de usuario

Sony

Sony KE-MR50M2 Manual de usuario

Sony

Sony KD-34XBR960 - 34" Fd Trinitron Wega Manual de usuario

Sony

Sony XR-55A90J Guía de referencia

Sony

Sony XBR-75X945C Manual de usuario

Sony

Sony XR-65A90J Manual de usuario

Sony

Sony KV-32HS500 - 32" Fd Trinitron Wega Manual de usuario

Manuales populares de TELEVISOR de otras marcas

Philips

Philips Colour Television Manual de usuario

Toshiba

Toshiba 27A10 Manual de usuario

Philips

Philips 42PF9630A/37 Manual de usuario

Hitachi

Hitachi 32FX48B Manual de usuario

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manual de usuario

Changhong Electric

Changhong Electric uhd55b6000is Manual de usuario

Philips

Philips Matchline 21CE7551 Manual de usuario

Panasonic

Panasonic Genus TX-G10 Manual de usuario

Toshiba

Toshiba 19A20 Manual de usuario

Philips

Philips 25PT4523-16 Manual de usuario

Philips

Philips PR0930X3 Manual de usuario

Philips

Philips Brilliance 231P4QPY Manual de usuario

Samsung

Samsung 55S9 B Series Manual de usuario

Philips

Philips 32HF9385D Guía de solución de problemas

Sharp

Sharp LC-40FI5012E Manual de usuario

Loewe

Loewe Table Stand Reference 55 Manual de usuario

Philips

Philips 32PFH5300 Manual de usuario

Sylvania

Sylvania 6427FB Manual de usuario