Sony SDX-500V Manual de usuario

AIT Drive

4-680-373-11(1)

2003 Sony Corporation

AIT-2 TAPE DRIVE

SDX-500V

AIT-1 TAPE DRIVE

SDX-400V

User’s Guide

This document contains proprietary

information which is protected by

document may be photocopied,

reproduced or translated to another

language without prior written consent

of Sony.

The information contained in this

document is subject to change without

notice.

SONY MAKES NO WARRANTY

OF ANY KIND WITH REGARD TO

THIS DOCUMENT.

Sony shall not be liable for errors

contained herein, indirect, special,

incidental or consequential damages in

connection with the furnishing,

performance or use of this document.

Your AIT TAPE DRIVE is assigned a

Model No. ATDNA2 for regulatory

compliance certifications.

The number is indicated on the model

number label on your drive along with

the rated voltoge and current.

VORSICHT

Diese Ausrüstung erfüllt die

Europäischen EMC-Bestimmungen für

die Verwendung in folgender /

folgenden Umgebung(en):

• Wohngegenden

• Gewerbegebiete

• Leichtindustriegebiete

(Diese Ausrüstung erfüllt die

Bestimmungen der Norm EN55022,

Klasse B.)

IMPORTANT SAFEGUARDS

For your protection, please read these

safety instructions completely before

operating the appliance, and keep this

manual for future reference.

Carefully observe all warnings,

precautions and instructions on the

appliance, or the one described in the

operating instructions and adhere to

them.

USE

Power Sources –This unit should be

operated only from the type of power

source indicated on the marking label.

If you are not sure of the type of

electrical power, consult your dealer or

local power company.

For the unit with a three-wire

grounding type ac plug:

If you are unable to insert the plug into

the outlet, contact your electrician to

have a suitable plug installed. Do not

defeat the safety purpose of the

grounding plug.

AC Power cord: (for AC mains

operating unit only)

The AC power cord should have

appropriate safety approvals or

marking for the country in which the

equipment will be used. Consult your

dealer or local power company.

Cleaning –Unplug the unit from the

wall outlet before cleaning or

polishing it. Do not use liquid

cleaners or aerosol cleaners.

Use a cloth lightly dampened with

water for cleaning the exterior of the

unit.

Object and Liquid Entry –Never

push objects of any kind into the unit

through openings as they may touch

dangerous voltage points or short out

parts that could result in a fire or

electric shock. Never spill liquid of

any kind on the unit.

INSTALLATION

Water and Moisture –Do not use

power-line operated units near water -

for example, near a bathtub,

washbowl, kitchen sink, or laundry

tub, in a wet basement, or near a

swimming pool, etc.

Power-Cord Protection –Route the

power cord so that it is not likely to be

walked on or pinched by items placed

upon or against them, paying

particular attention to the plugs,

receptacles, and the point where the

cord exits from the appliance.

Accessories –Do not place the unit on

an unstable cart, stand, tripod, bracket,

or table. The unit may fall, causing

serious injury to a child or an adult,

and serious damage to the unit. Use

only a cart stand tripod, bracket, or

table recommended by the

manufacturer.

Ventilation –The slots and openings

in the cabinet are provided for

necessary ventilation. To ensure

reliable operation of the unit, and to

protect it from overheating, these slots

and openings must never be blocked or

covered.

• Never cover the slots and openings

with a cloth or other materials.

• Never block the slots and openings

by placing the unit on a bed, sofa,

rug or other similar surface.

• Never place the unit in a confined

space, such as a bookcase, or built-

in cabinet, unless proper ventilation

is provided.

SERVICE

Damage Requiring Service –Unplug

the unit from the wall outlet and refer

servicing to qualified service

personnel under the following

conditions:

• When the power cord or plug is

damaged or frayed.

• If liquid has been spilled or objects

have fallen into the unit.

• If the unit has been exposed to rain

or water.

• If the unit has been subject to

excessive shock by being dropped,

or the cabinet has been damaged.

• If the unit does not operate normally

when following the operating

instructions. Adjust only those

controls that are specified in the

operating instructions. Improper

adjustment of other controls may

result in damage and will often

require extensive work by a

qualified technician to restore the

unit to normal operation.

• When the unit exhibits a distinct

change in performance - this

indicates a need for service.

Servicing –Do not attempt to service

the unit yourself as opening or

removing covers may expose you to

dangerous voltage or other hazards.

Refer to all servicing to qualified

service personnel.

Contents

Overview ..................................................................................................................6

Introduction ..............................................................................................................7

About AIT Drives ............................................................................................7

Precautions .......................................................................................................8

Installation ..............................................................................................................10

SCSI Connection/Setting the SCSI ID ...........................................................10

Option Switches (DIP Switch) .......................................................................11

Mounting Holes..............................................................................................13

Reconfiguring from 5.25" Model to 3.5" Model............................................14

Orientation......................................................................................................15

Attaching and Removing the Dust Cover...............................................................16

Attaching the Dust Cover...............................................................................16

Removing the Dust Cover .............................................................................. 18

Operation ................................................................................................................19

Location of 3 LEDs ........................................................................................ 19

Drive Operation..............................................................................................20

Emergency Tape Removal Procedure ............................................................ 22

WORM Function .................................................................................................... 24

Interface Implementation........................................................................................26

Supported SCSI Messages .............................................................................26

Supported SCSI Commands...........................................................................26

Specifications .........................................................................................................27

Product Specifications....................................................................................27

Sony Contacts .........................................................................................................30

For further information, please contact:.........................................................30

Overview

The Sony SDX-500V and SDX-400V drives are high capacity data storage

devices using Advanced Intelligent tape (AIT) technology. The SDX-500V

and SDX-400V drives achieve high data reliability through Read-After-

Write, an additional level of Error Correction Code, and other features.

The Sony SDX-500V and SDX-400V drives store data on tape using

standard formats called AIT (Advanced Intelligent Tape) and ALDC

formats.

Introduction

About AIT Drives

The SDX-500V is an internal AIT drive unit that uses data cartridges

conforming to the AIT-2 format. The SDX-400V is an internal AIT drive

unit that uses data cartridges conforming to the AIT-1 format. The SDX-

500V supports AIT-1 and AIT-2 formats. The SDX-400V supports only

AIT-1 format.

Features

The AIT Drive Unit SDX-500V has the following features:

•Supports reading and writing to data cartridges conforming to the AIT-1

and AIT-2 formats.

•Read After Write Function and third-level error correction code

guarantee high data reliability.

•Data compression provides 130 gigabytes of storage on 230 m tape-

length cartridge.*1

The native capacity is 50 gigabytes of storage on 230 m tape-length

cartridge.

•Stored data are automatically checked for compression.

•Wide Ultra SCSI LVD/SE interface is fully supported for host computer

access.

The AIT Drive Unit SDX-400V has the following features:

•Supports reading and writing to data cartridges conforming to the AIT-1

format.

•Read After Write Function and third-level error correction code

guarantee high data reliability.

•Data compression provides 91 gigabytes of storage on 230 m tape-length

cartridge.*1

The native capacity is 35 gigabytes of storage on 230 m tape-length

cartridge.

•Stored data are automatically checked for compression.

•Wide Ultra SCSI LVD/SE interface is fully supported for host computer

access.

*1 This is assuming 2.6 : 1 compression ratio.

The degree of data compression attained while recording data varies according to

system environment and data type.

Precautions

Installation

Avoid placing the drive in a location subject to:

–high humidity

–high temperature

–mechanical shock and vibration

–direct sunlight

*For details, see “Specifications”on page 27.

Operation

•Do not move the drive while it is operating. It may cause malfunction.

•Avoid exposing the drive to sudden changes from a low to high

temperatures. This may cause water condensation to collect inside the

drive. If the ambient temperature should suddenly rise while the drive is

turned on, wait at least one hour before turning on the drive. If you

attempt to operate the drive immediately after a sudden increase in

temperature, a malfunction may occur.

•Turning off the power to the drive while it is writing to tape may cause

the tape to become unreadable. All previously negotiated parameters will

be lost, whenever power to the drive is cycled.

Transportation

•Keep the original packing materials to facilitate safe transportation of the

drive.

•Always remove the tape/media cartridge before moving the drive. After

removing the drive from the computer, repack the drive into its original

packing.

SCSI Termination

The SDX-500V and SDX-400V conform to the Microsoft PC97 standard

which requires the internal (naked) drive to be terminated with an internal

terminator.

Microsoft PC97 SCSI requirements

SCSI peripherals must not terminate the bus. Both internal and external cable ends are

instead terminated by plug-in connectors.

Terminato

68p cable

Host Computer Wide SCSI

This drive

Example of SCSI setup

Installation

SCSI Connection/Setting the SCSI ID

SCSI 68pin Connector

5 V

Power Connector

1234

GND GND 12 V

Disable

Enable

Parity

Note :

= CLOSED/Jumper

Don’t care

OPEN/Jumper not

installed

Parity Disable

No Connection

SCSI ID 3

SCSI ID 2

SCSI ID 1

SCSI ID 0

Jumpers

SCSI ID

P.D.

N.C.

Parity Disable Jumper

Parity check function can be disabled by Jumper. Parity check is disabled

while left end jumper is installed. Parity generate function is always

enabled.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Almacenamiento de Sony

Sony

Sony SDX-500 Series Manual de usuario

Sony

Sony AITi200STS Manual de usuario

Sony

Sony CDL1100 Manual de usuario

Sony

Sony MicroVault USM-V Series Manual de usuario

Sony

Sony HD-B Series Manual de usuario

Sony

Sony MSA1GU2 - 1GB Memory Stick Micro M2 Manual de usuario

Sony

Sony MicroVault USM2GL Manual de usuario

Sony

Sony ODS-D77F Manual de usuario

Sony

Sony SDX-800V Series Manual de usuario

Sony

Sony BKMA-U70 Manual de usuario

Sony

Sony SAITe1300-F Manual de usuario

Sony

Sony MRW68E/D1/181 - Pro Duo USB Manual de uso y mantenimiento

Sony

Sony SDX-D250V Manual

Sony

Sony MicroVault USM-L Manual de usuario

Sony

Sony SF Series Manual de usuario

Sony

Sony HD-EG5 Manual de usuario

Sony

Sony StorStation LIB-81 Manual de usuario

Sony

Sony SxS PRO Manual de usuario

Sony

Sony StorStation AITe90V-UL Manual de usuario

Sony

Sony SDX-900V Series Manual de usuario

Sony

Sony SRR1000 Manual de usuario

Sony

Sony TSL-S11000 Manual de usuario

Sony

Sony CDL1100 Manual de usuario

Sony

Sony ODS-L100E Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario