Sony BKMA-U55 Manual de usuario
HARD DISC DRIVE UPGRADE KIT FOR MAV-555
BKMA-U55
INSTALLATION MANUAL
1st Edition
Serial No. 10001 and Higher
!WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so.Refer all servicing to
qualified service personnel.
!WARNUNG
Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.
!AVERTISSEMENT
Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien.Afin
de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les
réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.
Pour toute réparation faire appel à une personne compétente uniquement.
BKMA-U55
1 (E)
BKMA-U55
Table of Contents
Manual Structure
Purpose of this manual ........................................................................................ 3 (E)
Related manuals................................................................................................... 3 (E)
Contents ............................................................................................................... 3 (E)
Trademarks .......................................................................................................... 3 (E)
1. Installation
1-1. Operating Precautions When Replacing Hard Disk Drive....................1-1 (E)
1-2. Installation Conditions, Installation Space and
Power Source Specifications.................................................................1-3 (E)
2. Replacement of the Hard Disk Drive
2-1. Replacement Procedure.........................................................................2-1 (E)
2-2. Confirming Versions of MAV-555 and
BKMA-505/510/520/530/560 ...............................................................2-1 (E)
2-3. Replacing HDD of MAV-555 ...............................................................2-4 (E)
2-4. Setting Switches on the PU-109 Board .................................................2-6 (E)
2-5. Erasing All Materials after Installation of HDD (Logical Format).......2-7 (E)
2-5-1. Erasing All Materials in the HDD........................................2-7 (E)
2-6. Confirming Operation ...........................................................................2-8 (E)
3. Service Overview
3-1. HDD Unit ..............................................................................................3-1 (E)
3 (E)
BKMA-U55
Manual Structure
Purpose of this manual This manual is the installation manual of the BKMA-U55 Hard Disk Upgrade Kit
for the Multi-access Video Disk Recorder MAV-555.
This manual is intended for use by trained system and service engineers, and
describes the information regarding installation.
Related manuals Besides this Installation Manual, the following manuals are available for the
BKMA-U55.
..
..
.MAV-555, BKMA-505/510/511/512/570 Series
Maintenance Manual Volume 1 (Available on request)
This manual describes the information that premise the service based on parts
replacement (diagnostics, parts replacement, electrical alignment, and circuit
descriptions, etc.).
If this manual is required, please contact your local Sony Sales Office/Service
Center.
..
..
.MAV-555, BKMA-505/510/511/512/570 Series
Maintenance Manual Volume 2 (Available on request)
This manual describes the information that premise the service based on parts
replacement (parts list, block diagrams, schematic diagrams, board layouts, etc.).
If this manual is required, please contact your local Sony Sales Office/Service
Center.
Contents The following is a summary of all the section for understanding the contents of this
manual.
Section 1 Installation
Explains the operating precautions when replacing hard disk drive, the installation
environment, the power source specifications, etc.
Section 2 Replacement of the Hard Disk Drive
Explains the procedures to replace the hard disk drive.
Section 3 Service Overview
Explains the hard disk drive unit.
Trademarks Registered trademarks used in this manual are follows.
.Ethernet is a registered trademark of Xerox Corporation.
.Windows and Windows NT are the registered trademarks of Microsoft Corporation.
1-1 (E)
BKMA-U55
1-1. Operating Precautions When Replacing Hard Disk Drive
The Hard Disk Drives (HDD) are installed in the MAV-555.
The HDD is a precision part. The causes such as shock, vibration and static electricity to the unit, and the
conditions of temperature and humidity may damage HDD or its data.
Before installation, read fully the following cautions, and perform the installation with extra care.
Cautions about shock and vibration
When transporting and moving;
.Pack the unit using the packaging materials specified by the manufacturer.
.Use a proper cart.
.Put a cushion*on the cart.
.Avoid rough routes, and manage the cart gently.
When placing on a floor or table;
.Put a cushion*on stable and horizontal place, and put the unit on it gently.
.Do not place the unit near vibrating equipments.
For the unit;
.Never hit the unit by tool, and drop the tool on the unit.
Take extra care;
.Never give vibration or shock to the unit while the power is turned on, or within about 30 seconds after
turning off the power.
*Cushion: Polyethylene foam (density: 38 kg/m3, surface intrinsic resistance : 1011 to 1012 Z, thickness: 50 mm) or equivalent.
Cautions about rack mounting the unit
.Be careful not to give shock to the HDD.
Caution about static electricity
.Keep static-producing items such as plastics away from the working area.
Cautions about temperature and humidity
.Temperature and humidity of storage and operating condition must be kept within the correct specified
range.
.Never turn on the power with the cabinet is removed in consideration of the air-cooling effect.
Cautions when an error appears in a HDD
.Treat this unit conform to the above cautions, even when an error appeared.
.Keep the unit in the condition in which the error appeared, and record the details of the error.
Section 1
Installation
1-2 (E) BKMA-U55
H
D
D
Prolonging Life of Hard Disk Drive
The life of the hard disk drive (HDD) is shortened by vibration, shock,
temperature, humidity and static electricity.
To prolong the life of the hard disk drive, observe the following precautions. Read these
precautions before
using the hard disk
drive!
Static Electricity
Static electricity can reach up to several kilo volts and instantaneously
damage the HDD board.
.Be sure to touch the metal rack or similar earthed part
before touching the HDD in order to discharge the static
electricity of your body. We recommend wearing an earthed
wrist-band.
Vibration, Shock
Excessive vibration and shock to the HDD can damage the internal
heads and media.
In some cases, it may take several months for the heads and media to
become damaged after the vibration or shock is applied.
.Take great care not to drop the product or HDD assembly, and to
avoid collision when handling the product and HDD.
.The HDD is at greatest risk of damage when the power is
turned on, and for thirty seconds after the power is
turned off. Never move, transport or tap the product
during these times.
.Be sure to pack the product and the HDD assembly in the
packaging materials specified by the manufacturer or in a
carrying case that protects the HDD from shock and vibration
when transporting the HDD assembly or the product.
Temperature, Humidity
Use of the HDD in an environmental temperature exceeding the product
specification will accelerate wear of the parts and components of the HDD.
A sharp change of environmental temperature and humidity can cause
troubles inside the HDD such as condensation, even if the environ-
mental temperature and humidity are within the product specifica-
tions.
.The HDD starts up automatically when the main power of the
product is turned on. Always operate the HDD under the
specified environmental temperature and humidity once
the main power is turned on.
.When the HDD is moved into a warm indoor room from the cold
outdoors, the HDD assembly should be left for three hours
or more without removal from the packaging materials or
carrying case.
1-1. Operating Precautions When Replacing Hard Disk Drive
1-3 (E)
BKMA-U55
1-2. Installation Conditions, Installation Space and Power Source
Specifications
Installation conditions, installation space and power source specifications are the same as those of the
MAV-555.
Refer to the MAV-555 Installation Manual.
1-2. Installation Conditions, Installation Space and Power Source Specifications
Tabla de contenidos
Otros manuales de Almacenamiento de Sony
Sony
Sony PWSK-4501 Manual de usuario
Sony
Sony PHU-60K Series Manual de usuario
Sony
Sony HD-P Series Manual de usuario
Sony
Sony StorStation AITi130 Manual de usuario
Sony
Sony MSFD-20U Manual de usuario
Sony
Sony CDL1100 Manual de usuario
Sony
Sony USD5G Manual de usuario
Sony
Sony NSS-S2 Manual de usuario
Sony
Sony PXU-MS240 Manual de usuario
Sony
Sony SxS PRO Manual de usuario
Sony
Sony VGC-RA710G Guía
Sony
Sony csm-20s Manual de usuario
Sony
Sony VAIO VGP-UHDM08 Manual de usuario
Sony
Sony MicroVault USM-L Manual de usuario
Sony
Sony USM8GM Manual de usuario
Sony
Sony VGN-AW Series Guía
Sony
Sony ERA-MS008 Manual de usuario
Sony
Sony StorStation AITi90 Manual de usuario
Sony
Sony VGN-FJ170 Guía
Sony
Sony MSX-M1GST Manual de usuario
Manuales populares de Almacenamiento de otras marcas
Spectra Logic
Spectra Logic T-Series Spectra T50e Manual de usuario
Panasonic
Panasonic LKM-F931-1 Manual de usuario
Tabernus
Tabernus Enterprise Erase E2400 Manual de usuario
Rocstor
Rocstor COMMANDER 3F series Manual de usuario
HP
HP P9000 Manual de usuario
Western Digital
Western Digital Ultrastar Data60 Manual de usuario