Sony DWZ-B50I Manual de usuario

4-471-613-13 (1)

Digital Wireless

Package

Operating Instructions

Before operating the unit, please read this manual thoroughly

and retain it for future reference.

DWZ-B50I

DWZ-B50GB

2Table of Contents

Table of Contents

Package Contents .......................... 3

DWZ-B50I ............................... 3

DWZ-B50GB .......................... 4

Models Available

Separately ................................ 4

Features .......................................... 5

DWZ-B50I ............................... 6

DWZ-B50GB .......................... 6

ZTX-B01 ................................. 6

ZRX-HR50 .............................. 6

Parts Identification ........................ 7

Power Supply ............................... 10

Inserting Batteries .................. 10

Attaching the Supplied

Accessories ................................... 11

Attaching the Supplied

Accessories to the Half-Rack

Receiver (ZRX-HR50) .......... 11

Attaching the Supplied

Accessories to the Body-Pack

Transmitter (ZTX-B01) ......... 12

Using the Microphone (ECM-

GZ1UBMP) ........................... 12

Receiver Settings ......................... 14

Half-Rack Receiver

(ZRX-HR50) ......................... 14

Transmitter Settings ................... 17

Configuring the Transmitting

Channel Settings .................... 17

Channel Display .................... 18

Channel Frequency List.............. 19

System Configuration

Examples ...................................... 22

Configuration Examples for the

DWZ-B50I ............................. 22

Configuration Example for the

DWZ-B50GB ........................ 23

Troubleshooting ........................... 24

Important Notes on Use ...............27

Usage and Storage ..................27

Cleaning .................................28

Specifications ................................28

DWZ-B50I/B50GB ................28

Package Contents

This manual contains information on the Sony DWZ-B50I/B50GB Digital Wireless

Packages. The contents of each package are as follows.

DWZ-B50I

This set includes a microphone for acoustic instruments in addition to a body-pack transmitter

(ZTX-B01) and half-rack receiver (ZRX-HR50).

Supplied accessories

Antenna (2)

Half-rack receiver

(ZRX-HR50) (1)

Microphone

(ECM-GZ1UBMP) (1)

• Wind screen (1)

Warranty card (1)

(for UC model only)

Warranty booklet (1)

(for SYV model only)

Belt clip (1)

Body-pack transmitter

(ZTX-B01) (1)

Belt clip screw (1)

AC adapter (1)

Power cord (1)

(for KR4 model only)

Power cord (2)

(for E model only)

Conversion adapter (1)

(for E model only)

Before Use (1)

For optimal performance (1)

(EU8 model includes 2)

Quick Start Guide (1)

(EU8 model includes 2)

Operating Instructions

(CD-ROM) (1)

4Package Contents

DWZ-B50GB

This set includes a guitar cable in addition to a body-pack transmitter (ZTX-B01) and half-

rack receiver (ZRX-HR50).

Models Available

Separately

The transmitter and receiver in each

package are available for purchase

separately. The components provided with

each product are given below.

ZTX-B01

• Body-pack transmitter (ZTX-B01) (1)

• Belt clip (1)

• Belt clip screw (1)

• Before Use (1)

• Operating Instructions (Turkish) (1) (for

SYV model only)

• Operating Instructions (CD-ROM) (1)

• Warranty card (1) (for KR model only)

• Warranty booklet (1) (for SYV model

only)

Body-pack transmitter

(ZTX-B01) (1)

Supplied accessories

Belt clip (1)Guitar cable (1)

For optimal performance (1)

(EU8 model includes 2)

Quick Start Guide (1)

(EU8 model includes 2)

Operating Instructions

(CD-ROM) (1)

Belt clip screw (1)

AC adapter (1)

Power cord (1)

(for KR4 model only)

Power cord (2)

(for E model only)

Conversion adapter (1)

(for E model only)

Before Use (1)

Warranty card (1)

(for UC model only)

Warranty booklet (1)

(for SYV model only)

Half-rack receiver

(ZRX-HR50) (1)

Antenna (2)

Features

ZRX-HR50

• Half-rack receiver (ZRX-HR50) (1)

• AC adapter (1)

• Antenna (2)

• Before Use (1)

• Operating Instructions (Turkish) (1) (for

EU8 model only)

• Operating Instructions (CD-ROM) (1)

• Warranty card (1) (for UC model only)

Features

The DWZ series is a digital wireless system

that combines Sony’s consistently

developed superior audio technology,

highly reliable wireless technology, and

state-of-the-art digital signal processing

technology. Using an unlicensed 2.4 GHz

band, the system provides wide-range

functionality with simple, user-friendly

operability.

By providing a package that is optimized

for specific usage environments, the system

offers a wireless solution to users ranging

from those inexperienced with wireless

systems to seasoned professionals.

A new microphone that can

comprehensively pick up the wide dynamic

range produced by instruments has also

been developed (DWZ-B50I).

Superb audio quality

By transmitting audio signals via 24-bit

high-quality linear PCM digital

transmission, without signal compression,

decompression (available only when the RF

mode is set to Narrow Mode (NARROW)),

or similar processing, the system provides

superb audio quality and high-bandwidth

transmissions that approach that of wired

microphones.

High reliability

By allowing you to select from two RF

modes based on your intended use and

incorporating Sony’s unique data

processing technology, the system provides

highly-reliable wireless transmission in

wireless LAN environments. In addition,

the two RF modes each consist of six

channels, allowing you to select the

appropriate RF mode and channel

according to your intended purpose. The

receiver is equipped with two antennas with

6Features

the antenna with the best reception status

selected automatically via space diversity,

providing stable reception with minimized

audio breakup and noise occurrences.

DWZ-B50I

The DWZ-B50I is a package that includes a

microphone ideal for use with saxophones,

trumpets, and other wind instruments, a

body-pack transmitter (ZTX-B01), and a

half-rack receiver (ZRX-HR50).

DWZ-B50GB

The DWZ-B50GB is a package that

includes a body-pack transmitter

(transmitter: ZTX-B01) and a half-rack

receiver (receiver: ZRX-HR50) and is ideal

for use with electric guitars, electric

acoustic guitars, electric bass guitars, etc.

ZTX-B01

A transmitter designed with a sturdy metal

body.

Equipped with a muting function, an

instrument/mic input switching function,

and an attenuator adjustment function, the

unit supports a wide range of audio input

levels. The supplied belt clip can be rotated

in 90-degree increments, allowing you to

adjust the direction in which the cables

extend based on your environment.

ZRX-HR50

A half-rack receiver equipped with large-

screen high-resolution color LCD that

combines high-functionality with simple

operability.

The Best Channel Selection and Clear

Channel Scan functions allow quick and

easy configuration of safe channels. The

cable tone generator also allows you to

match the quality of wireless and wired

audio. This reduces the amount of equalizer

adjustment necessary on the amp side

during wireless transmission. In addition,

the 5-band graphic equalizer allows wide-

range audio-quality adjustment. You can

also select whether the muting function

applies to the UNBALANCED/

BALANCED OUTPUT connector.

Using the optional RMM-HRD1 Rack

Mount Kit allows you to mount the unit on

a rack.

Parts Identification

Parts

Identification

Body-pack transmitter

(transmitter: ZTX-B01)

aAntenna cover

Contains the antenna.

Do not squeeze the antenna cover. Doing so

will weaken the signal that is transmitted,

decreasing the transmission range.

bBATT (remaining battery) indicator

Indicates the remaining battery charge

when the unit is turned on.

The remaining battery indication only

appears when alkaline dry cell batteries are

being used.

cButton lock switch

Locks the POWER/MUTING button and

the CHANNEL SELECT button. This

prevents unintentional operations, such as

accidentally turning the power off. The

factory default setting is UNLOCK.

LOCK: Locks the buttons to disable their

operation.

UNLOCK: Releases the lock to enable

button operation.

You cannot turn on the unit while this

switch is set to the LOCK position, as even

the power button is disabled. Set the switch

to the UNLOCK position to perform

operations.

dAudio input connector

Connect the supplied microphone

(DWZ-B50I), or connect a guitar or similar

instrument here using the supplied guitar

cable (DWZ-B50GB).

eAUDIO/MUTING indicator

Indicates the input level of the audio signal

and the status of the muting function.

fINPUT switch

Set this based on the connected equipment.

The factory default setting is INST.

INST: Set to this position when a guitar or

similar instrument is connected.

MIC: Set to this position when a

microphone is connected.

Caution

Indicator Status

Lit (green) Good

Lit (red) Almost dead

Caution

Indicator Status

Lit (green) Audio input present

Lit (red) Excessive audio

input

Off Audio input weak or

nonexistent

Blinking (orange) Muting function

enabled (i.e., audio

disabled)

8Parts Identification

• If microphones other than the supplied

ECM-GZ1UBMP or other than the

ECM-HZ1UBMP/LZ1UBMP (not

supplied) are connected, problems such

as lack of sound and phase inversion may

occur.

• Do not set the switch to the MIC position

while inputting audio from an audio

mixer or similar device. Outputting audio

at excessive levels may distort audio or

damage the playback/recording device.

For details on the setting, see “System

Configuration Examples” (page 22).

gATT (attenuator) switch

Set the attenuation level based on the

connected equipment. Under factory

default settings, this is set to 0 dB for units

supplied with the DWZ-B50GB and 20 dB

for units supplied with the DWZ-B50I.

hBattery compartment

Insert two LR6 (size AA) batteries here.

For details on how to insert batteries, see “Inserting

Batteries” (page 10).

iPOWER/MUTING button

Turns the unit on or off. This button can

also be used to enable or disable the muting

function.

jChannel display

Displays the transmission channel.

The display disappears after about 10

seconds. You can display it again by

pressing the channel selection button.

For details on the channel display, see “Channel

Display” (page 18).

kCHANNEL SELECT button

Allows you to select the RF mode and the

transmitting channel.

For details on selecting the RF mode and

transmitting channel, see “Configuring the

Transmitting Channel Settings” (page 17).

Half-rack receiver (receiver:

ZRX-HR50)

aPOWER button

Turns the unit on or off.

bPOWER indicator

Lights when the unit is turned on.

Caution

Attenuation

level (dB)

When to use

0 Standard switch position

10 Set to this position if the

AUDIO/MUTING

indicator on the receiver

occasionally lights red.

20 Set to this position if the

AUDIO/MUTING

indicator on the receiver

is always lit red.

Function Button operation

Turn power on Press the button for

at least 1 second

Turn power off Press the button until

indicator turns off

Enable muting

function

Press the button

Disable muting

function

Front

Parts Identification

cDisplay

Displays setting configurations and other

information.

AReceiving channel indicator

Displays the receiving channel.

BRemaining transmitter battery

indicator

Displays the remaining battery charge of

the transmitter.

An approximate duration is displayed for

the remaining usage time. This duration

appears only when signals are being

received.

CAudio level meter

Displays the audio level.

Set the audio level so that the red bar is not

displayed continuously.

DEqualizer status

Displays the on/off status of the equalizer.

EReceiving level indicator

Displays the reception status of the radio

signal.

More bars indicate more stable reception.

dESC (escape) button

Cancels operations, or returns to the main

screen from the settings screen.

eRotary encoder

Allows you to change settings.

For details on changing settings, see “Receiver

Settings” (page 14).

aANTENNA a/b connector (BNC

type)

Connect the supplied antenna here.

bUNBALANCED OUTPUT AUX/

TUNER (external audio output)

connector (headphone jack)

Connect monitoring equipment and similar

peripheral devices here.

The audio output from the UNBALANCED

OUTPUT AUX/TUNER connector will

continue, even if the muting function of the

transmitter is enabled. You can enable or

disable the audio from this connector via

the settings in the receiver’s display.

For details on settings, see “Configuring the

transmitter muting function for the output

connectors” (page 16).

For details on connections, see “System

Configuration Examples” (page 22).

cUNBALANCED OUTPUT MAIN

(main audio output) connector

(headphone jack)

Connect a mixer or an amp here.

For details on connections, see “System

Configuration Examples” (page 22).

Rear

10 Power Supply

dBALANCED OUTPUT connector

(XLR type)

Connect a mixer or similar device here.

For details on connections, see “System

Configuration Examples” (page 22).

eMIC/LINE (audio output level)

selector

Selects the audio output level of the

BALANCED OUTPUT connector. The

factory default setting is MIC.

MIC: Sets the audio output level to the mic

level.

LINE: Sets the audio output level to the

line level.

Do not set the selector to the LINE position

while outputting audio to an audio mixer or

similar device. Inputting audio at excessive

levels may distort audio or damage the

playback/recording device.

fCable clamp

Secures the cable of the supplied AC

adapter.

gDC IN 12V (power input) connector

Connect the supplied AC adapter here.

Power Supply

This section describes the power supply for

each device.

For details on how to insert batteries, see “Inserting

Batteries” (page 10).

Body-pack transmitter (ZTX-

B01)

Power supplied by two LR6 (size AA)

batteries.

The following types of battery can be used.

• Alkaline dry cell batteries

• Rechargeable nickel-metal hydride

batteries

• Lithium batteries

Half-rack receiver (ZRX-HR50)

Power supplied by the supplied AC adapter.

Inserting Batteries

CAUTION

Danger of explosion if battery is incorrectly

replaced.

Replace only with the same or equivalent

type recommended by the manufacturer.

When you dispose of the battery, you must

obey the law in the relative area or country.

• Always use sets of the same type of

battery. Do not use batteries of different

types or remaining charges together as a

set.

• Replacing the batteries during operation

will result in high noise. Be sure to turn

off the unit before replacing the batteries.

Caution

Notes

Otros manuales para DWZ-B50I

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Receptor de Sony

Sony

Sony IFU-WH1 Manual de usuario

Sony

Sony FA-WRR1 Manual de usuario

Sony

Sony STR-DG710 Manual de usuario

Sony

Sony STR-DH590 Guía del usuario

Sony

Sony STR-DN2010 Manual de instrucciones Manual de usuario

Sony

Sony STR-DH700 Manual de usuario

Sony

Sony STR-DA3300ES - Multi Channel Av Receiver Manual de usuario

Sony

Sony STR-DA4ES - Fm Stereo/fm-am Receiver Manual de usuario

Sony

Sony STR-V220 Manual de usuario

Sony

Sony STR-DB900 Manual de usuario

Sony

Sony DRC-BT15 Manual de usuario

Sony

Sony STR-AV780 Manual de usuario

Sony

Sony SAT-A55 RM-Y802 Manual de usuario

Sony

Sony STR-DA5500ES Manual de usuario

Sony

Sony HCD-GZR9D Manual de usuario

Sony

Sony TA-VA8ES Manual de usuario

Sony

Sony STR-DA1500ES Manual de usuario

Sony

Sony STR-DA5800ES Manual de usuario

Sony

Sony HCD-AZ2D Manual de usuario

Sony

Sony STR-KM5500 Manual de usuario

Sony

Sony XDR-S100CD Manual de usuario

Sony

Sony STR-D350Z - Fm-am Receiver Manual de usuario

Sony

Sony STR-DH700 Manual de usuario

Sony

Sony STRDG820 - STR AV Receiver Manual de usuario

Manuales populares de Receptor de otras marcas

Garmin

Garmin GA 23 Manual de usuario

Aiphone

Aiphone PS-12F Manual de usuario

IMES

IMES TCS-01CA-PMI Manual de usuario

BWI Eagle

BWI Eagle AIR-EAGLE SR Manual

AMIMON

AMIMON AMN12310 WHDI Manual de usuario

Dual

Dual DMCPA79BT Instrucciones de funcionamiento

Sound Associates

Sound Associates SA652P Manual de usuario

Sherwood

Sherwood NewCastle R-772 Manual de usuario

Audio

Audio A10-RX Series Manual de usuario

AllSee

AllSee PushShare PSRV1.1 Manual de usuario

DEMAG

DEMAG DRC-DR D2 Manual de usuario

Teleco

Teleco TVRCL868A02 Manual de usuario

Bosch

Bosch RF3222E Manual de usuario

Kramer

Kramer 631R Manual de usuario

Xpress

Xpress xmc10 Manual de usuario

JVC

JVC KD-MR1BTS Manual de usuario

Omega Engineering

Omega Engineering UWTC-REC3 Manual de usuario

e-survey

e-survey E300 Pro Manual de usuario