Sony CDP-XA555ES Manual de usuario

Getting Started

3-867-064-11 (1)

1999 by Sony Corporation

Operating Instructions

Mode d’emploi

Manual de instrucciones

CDP-XA555ES

Compact Disc

Player

2GB

WARNING

To prevent fire or shock

hazard, do not expose

the unit to rain or

moisture.

To avoid electrical shock,

do not open the cabinet.

Refer servicing to

qualified personnel only.

Do not install the

appliance in a confined

space, such as a bookcase

or built-in cabinet.

Welcome!

Thank you for purchasing the Sony

Compact Disc Player. Before operating

the unit, please read this manual

thoroughly and retain it for future

reference.

About This Manual

The instructions in this manual are for

model CDP-XA555ES.

Conventions

• Instructions in this manual describe

the controls on the player.

You can also use the controls on the

remote if they have the same or similar

names as those on the player.

• The following icons are used in this

manual:

Indicates that you can do the

task using the remote.

Indicates hints and tips for

making the task easier.

This appliance is classified as a CLASS 1

LASER product.

The CLASS 1 LASER PRODUCT

MARKING is located on the rear

exterior.

Getting Started

3GB

TABLE OF CONTENTS

Getting Started

Unpacking............................................................................................................................. 4

Hooking Up the System...................................................................................................... 4

Playing a CD............................................................................................................................. 6

Playing CDs

Customising the Sound of Your Music (Digital Filter Function).................................. 8

Using the Display ................................................................................................................ 9

Locating a Specific Track .................................................................................................. 10

Locating a Particular Point in a Track ............................................................................ 11

Playing Tracks Repeatedly ............................................................................................... 11

Playing in Random Order (Shuffle Play) ....................................................................... 12

Creating Your Own Programme (Programme Play) .................................................... 13

Playing Only Specific Tracks (Delete Play).................................................................... 15

Recording From CDs

Recording Your Own Programme .................................................................................. 16

Recording a CD by Specifying the Tape Length (Time Edit/Just Edit) .................... 17

Fading In or Out................................................................................................................. 18

Useful Tips for Recording ................................................................................................ 19

Storing Information About CDs (Custom Files)

What You Can Do With the Custom Files ..................................................................... 20

Indexing a Disc (Custom Index) ...................................................................................... 20

Storing Specific Tracks of a Disc (Delete Bank)............................................................. 22

Additional Information

Precautions ......................................................................................................................... 23

Notes on CDs...................................................................................................................... 23

Troubleshooting .................................................................................................................24

Specifications ...................................................................................................................... 24

Index........................................................................................................................................... 25

Getting Started

4GB

ANALOG OUT

FIXED

Unpacking

Check that you received the following items:

• Audio connecting cord (1)

• Remote commander (remote) (1)

• R6 (size AA) batteries (2)

• Stabilizer (1)

Inserting batteries into the remote

You can control the player using the supplied remote.

Insert two R6 (size AA) batteries by matching the +

and – on the batteries to the diagram inside the battery

compartment.

Insert the negative (–) end first, then push in and down

until the positive (+) end clicks into the position.

When using the remote, point it at the remote sensor g

on the player.

Hooking Up the System

Overview

This section describes how to hook up the CD player to

an amplifier. Be sure to turn off the power of each

component before making the connections.

When to replace batteries

With normal use, the batteries should last for about six

months. When the remote no longer operates the player,

replace all the batteries with new ones.

Notes

• Do not leave the remote near an extremely hot or humid

place.

• Do not drop any foreign object into the remote casing,

particularly when replacing the batteries.

• Do not expose the remote sensor to direct sunlight or

lighting apparatuses. Doing so may cause a malfunction.

• If you don’t use the remote for an extended period of time,

remove the batteries to avoid possible damage from battery

leakage and corrosion.

To mains

CD player

DIGITAL OUT

(COAXIAL)

ANALOG OUT

(VARIABLE)

DIGITAL OUT

(OPTICAL)

To mains

Amplifier

What cords will I need?

pWhen making analog hookups

•Audio cord (supplied) (1)

White

(L)

Red

(R)

White

(L)

Red

(R)

pWhen making digital hookups

•Optical cable (not supplied)

•Coaxial cable (not supplied)

: Signal flow

DIGITAL OUT

ON/OFF

Getting Started

5GB

Hookups

pWhen making analog hookups

When connecting an audio cord, be sure to match the

colour-coded cord to the appropriate jacks on the

components: Red (right) to Red and White (left) to

White. Be sure to make connections firmly to avoid

hum and noise.

Amplifier

AmplifierCD player

• If you have an analog power amplifier

Connect the amplifier via the ANALOG OUT (VARIABLE)

jacks using the supplied audio cord. Be sure to set the

DIGITAL OUT ON/OFF switch to OFF (the factory setting)

when you make this connection. You can adjust the output

level with the ANALOG OUT/PHONE LEVEL control on

the player or the ANALOG OUT LEVEL buttons on the

remote.

• If you have a digital component with an optical digital

input connector

Connect the component via the DIGITAL OUT (OPTICAL)

connector using the optical cable (not supplied). Take off

the cap and plug in the optical cable.

CD player

Digital component

CD player

FIXED

VARIABLE

INPUT

ANALOG OUT

FIXED

VARIABLE

INPUT

DIGITAL OUT

OPTICAL

OFF

COAXIAL

DIGITAL IN

OPTICAL

• If you have a digital component with a coaxial digital

input connector

Connect the component via the DIGITAL OUT (COAXIAL)

connector using the coaxial cable (not supplied).

Digital componentCD player

Note

When you connect via the DIGITAL OUT connector, noise

may occur when you play CD software other than music, such

as a CD-ROM.

Connecting the mains lead

Connect the mains lead to the mains.

Removing the notice sheet

Remove the notice sheet from the player before using.

pWhen making digital hookups

You can prevent deterioration of the signal during

transmission, since the music signal output through

the digital output connectors retains digital form.

You can connect a digital component such as a

digital amplifier, D/A converter, DAT, or MD. When

you connect a DAT or MD, you can make digital

recordings from CDs.

Be sure to set the DIGITAL OUT ON/OFF switch to

ON when you make this connection.

Note that you cannot use the fade in/out function

(page 18) when making this connection.

OPTICAL COAXIAL

DIGITAL OUT

OFF

DIGITAL IN

COAXIAL

Basic Operations

6GB

Playing a CD

•See pages 4 – 5 for hookup

information.

If you turn on the player with

a CD in the tray

You can start playing

automatically from the

beginning of the CD. If you

connect a commercially

available timer, you can set

the timer to play at any time.

If“–––––”appears in the

display

Place the supplied stabilizer

on the CD.

If you do not, this indication

appears.

Note

In Step 3, be careful not place

two or more CDs on the disc

tray.

Otherwise, you may damage the

discs and/or the player.

If play doesn’t start from the

first track

Press PLAY MODE

repeatedly until

“SHUFFLE,” “PROGRAM”

and “CUSTOM INDEX”

disappear from the display

(or press CONTINUE on the

remote).

Turn on the amplifier and select the CD player position.

Press Uto turn on the player.

Press §OPEN/CLOSE, and place a CD on the tray.

CHECK CLEAR FILTER

PUSH ENTER

AMS

REPEAT TIME

TIME FADE FILE ERASE

EDIT/

PHONE LEVEL

ANALOG OUT

PHONES

MIN MAX

OPEN/CLOSE

MODE

PLAY

Connect the

headphones.

Adjust the

headphones volume.*

Press (.

The disc tray closes and the player plays all the tracks once

(Continuous Play).

Adjust the volume on the amplifier.

With the label side up Place the supplied stabilizer on the

CD.

*The output level from the ANALOG OUT

(VARIABLE) jacks will also change.

Basic Operations

7GB

To stop playback

Press p.

When you want to

Pause

Resume play after pause

Go to the next track

Go back to the preceding track

Stop play and remove the CD

You need to

Press P

Press Por (

Turn ≠AMS ±clockwise. (When

using the remote, press +.)

Turn ≠AMS ±anticlockwise.

(When using the remote, press =.)

Press §OPEN/CLOSE

Playing CDs

8GB

Customising the Sound of Your

Music (Digital Filter Function)

This player has a variable coefficient (V.C.) digital

filter. By selecting the type of filter you want, you can

adjust the sound to match your system, your room, the

music source, etc.

≠AMS ±FILTER

3Push ≠AMS ±to select the filter.

The original display reappears.

The selected digital filter number is stored in

memory even if you turn off the power.

You can also change the digital filter number by

pressing the FILTER button while the indicator is

flashing.

Selecting the filter using the remote Z

1Press DIGITAL FILTER.

The display shows the currently selected filter

number and the filter indicator flashes.

2Press DIGITAL FILTER repeatedly until the

display shows the digital filter number you want.

The digital filter number is stored and the original

display reappears.

Characteristics of each digital filter

The contents and characteristics of the five digital

filters are as follows:

Std: Standard (sharp roll-off)

Provides a wide frequency range and spatial feeling, as

it holds the most information among the five filters.

Suitable for playback of classical music.

1: Clear (slow roll-off)

Provides smooth and powerful sound with clear image

position.

Suitable for playback of jazz band performances and

jazz vocals.

2: Plain (slow roll-off)

Provides fresh and energetic sound with rich vocal

expression.

Suitable for playback of vocal-performances.

3: Fine (slow roll-off)

Provides well-balanced natural sound, with a of large

scale feel and rich reverberation.

Suitable for listening to any kind of music when you

are relaxed.

4: Silky (slow roll-off)

Provides a wide scale feel with associated subtleties.

Suitable for light classical music, especially strings.

DIGITAL FILTER

nStd n1 n2 n3 n4

Playing CDs

Selecting the filter directly on the player

1Press FILTER.

The display shows the currently selected filter

number and the filter indicator flashes.

2Turn ≠AMS ±until the digital filter number

you want appears in the display.

As you turn the ≠AMS ±control, the digital

filter number changes cyclically as follows:

If you are playing a disc, the sound will be

interrupted momentarily.

Playing CDs

9GB

Sharp roll-off filter Slow roll-off filter

Pre-ringing Post-ringing Pre-ringing Post-ringing

Comparison of impulse response for sharp roll-off filter

and slow roll-off filter

-120

022.05k

Response

(dB) (Slow roll-off filter)

(Sharp roll-off filter)

Frequency (Hz)

Comparison of cutoff characteristics for sharp roll-off filter

and slow roll-off filter

What is a variable coefficient (V.C.) digital

filter?

CD players use digital filters to eliminate the noise

generated during sampling. You can change the tone of

your music by changing the cutoff characteristics of the

digital filter.

Sharp roll-off and slow roll-off

Digital filters can be roughly classified into sharp roll-

off types and slow roll-off types, according to their

cutoff characteristics.

Sharp roll-off filters quickly cut off noise over

22.05 kHz generated during sampling. This is a

superior way of completely reproducing signals below

20 kHz and is the basic principle behind digital audio.

On the other hand, slow roll-off filters cut off noise

generated during sampling, and are able to hold pre-

ringing and post-ringing (a kind of sound smearing) in

the impulse response signal to a minimum.

Note

The Digital Filter function primarily changes characteristics

outside the audible frequency. They cannot affect changes

within the audible frequency such as those provided by the

tone controls of the amplifier. Therefore, with certain

combinations of hardware and software, there may be no

noticeable effect after switching the filter.

Using the Display

You can check information about the disc using the

display.

TIME DISPLAY MODE

Checking the total number and playing

time of the tracks

Press TIME before you start playing.

The display shows the total number of tracks, total

playing time, and music calendar.

Total playing time

Total number of

tracks Music calendar

TIME

12345

678910

MIN SEC

While in Shuffle Play mode (“SHUFFLE” appears in

the display; see page 12), a one-second access time

blank is added between each track. This increase is

automatically added to the total playing time in the

display.

If the disc has more than 15 tracks, the zindication

appears next to 15 on the music calendar.

The information also appears when you press

§OPEN/CLOSE to close the disc tray.

Playing CDs

10GB

Display information while playing a disc

While playing a disc, the display shows the current

track number, index number, playing time, and the

music calendar.

Current track

number Playing time Music calendar

Index number (page 11) or Custom Index

number (page 20)

The track numbers in the music calendar disappear

after they are played.

Checking the remaining time

Each time you press TIME while playing a disc, the

display changes as shown in the chart below.

If the remaining time exceeds 100 minutes in programme

mode, “––.––”appears instead of the remaining time.

Press

Playing time

and number

of the current

track

Remaining

time on the

current

track

Remaining

time on the

disc

Press

12345

678910

MIN SECINDEX

Locating a Specific Track

You can quickly locate any track while playing a disc

using the AMS (Automatic Music Sensor) on the player

or the number buttons on the remote.

Number

buttons

>10

=/+

To locate

The next or

succeeding tracks

The current or

preceding tracks

A specific track

directly Z

When you directly locate a track numbered over 10

Press >10 first, then the corresponding number buttons

on the remote. To enter “0,” use button 10/0.

Example: To play track number 30

Press >10 first, then 3 and 10/0.

You need to

Turn ≠AMS ±clockwise until

you find the track. When using the

remote, press +repeatedly until you

find the track.

Turn ≠AMS ±anticlockwise

until you find the track. When using

the remote, press =repeatedly until

you find the track.

Press the number button of the track

on the remote.

≠AMS ±

Turning off the music calendar in the

display

Each time you press DISPLAY MODE on the remote

while playing a disc, the music calendar turns off and

on alternately in the display.

12345

678910

MIN SECINDEX

12345

678910

MIN SECINDEX

12345

678910

MIN SEC

Otros manuales para CDP-XA555ES

Tabla de contenidos

Idiomas:

Otros manuales de Reproductor de CD de Sony

Sony

Sony DVP-NC80V/B Operating Instructions... Manual de usuario

Sony

Sony CDX-444RF - Compact Disc Changer System Manual de usuario

Sony

Sony CDX-C8050X - Fm/am Compact Disc Player Manual de usuario

Sony

Sony DNS313F - S2 Sports CD Walkman Manual de usuario

Sony

Sony CDX-2500R Manual de instrucciones

Sony

Sony CDX-GT61UMS Manual de usuario

Sony

Sony SCD-C555ES - Super Audio Cd Manual de usuario

Sony

Sony Walkman D-E999 Manual de usuario

Sony

Sony DNE330 - Walkman Cd MP3 Atrac Player Manual de usuario

Sony

Sony CDP-XA30ES Manual de usuario

Sony

Sony S300 - CFD Boombox Manual de usuario

Sony

Sony RC-BX30 Manual de usuario

Sony

Sony XR3F-19B160 Manual de usuario

Sony

Sony CDP-NW10 - Compact Disc Player Manual de usuario

Sony

Sony CFD ZW755 - Portable CD / Cassette Manual de usuario

Sony

Sony DVP-NC85H - HDMI/CD Progressive Scan DVD... Manual de usuario

Sony

Sony CDP-C160Z Manual de usuario

Sony

Sony D-E705 - Compact Disc Player Manual de usuario

Sony

Sony CDX-646 Operating Instructions (English,Español,... Manual de usuario

Sony

Sony CDP-CE215 - 5 Disc Cd Changer Manual de usuario

Sony

Sony PDW-HD1550 Manual de usuario

Sony

Sony CFD-970 Manual de usuario

Sony

Sony D99 CHASSIS Manual de usuario

Sony

Sony XDCAM PDW-1500 Manual de usuario

Manuales populares de Reproductor de CD de otras marcas

RCA

RCA RP-7923 Manual de usuario

Pioneer

Pioneer DEH-P3550MP XM Manual de usuario

Philips

Philips AZ1207 Manual de usuario

Philips

Philips CD582 Manual de usuario

Philips

Philips AZ 6821 Manual de usuario

Lasonic

Lasonic MSU-2020 Manual de usuario

THOMSON

THOMSON RCD150 Manual de usuario

Denon

Denon DCD-1420 Manual de usuario

Panasonic

Panasonic SJ-MR100 Manual de usuario

Onkyo

Onkyo DX-7210 Manual de usuario

Denon

Denon DVM-4800 Manual de usuario

JBL

JBL MR-32 Manual de usuario

RCA

RCA RCD152 Manual de usuario

Technics

Technics SL-PS770A Manual de usuario

Clarion

Clarion compact disc Manual de usuario

Philips

Philips Expanium AZ 1538 Manual de usuario

Rotel

Rotel RCD 975 Manual de usuario

Pioneer

Pioneer CLD-D790 Manual de usuario