Sony CDX-C660 - Fm/am Compact Disc Player Manual de usuario

Operating Instructions

1997 by Sony Corporation

FM/AM

Compact Disc

Player

CDX-C660

For installation and connections, see the supplied installation/connections

manual.

Owner’s Record

The model and serial numbers are located on the bottom of the unit.

Record the serial number in the space provided below.

Refer to these numbers whenever you call upon your Sony dealer regarding this

product.

Model No. CDX-C660 Serial No.

Welcome !

Thank you for purchasing the Sony Compact

Disc Player. This unit lets you enjoy a variety

of features by using either a supplied rotary

remote or an optional wireless remote.

In addition to the CD playback and radio

operations, you can expand your system by

connecting an optional CD/MD changer.

Warning

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide

reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses, and can radiate

radio frequency energy and, if not installed

and used in accordance with the instructions,

may cause harmful interference to radio

communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user

is encouraged to try to correct the interference

by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the

equipment and receiver.

— Connect the equipment into an outlet on a

circuit different from that to which the

receiver is connected.

— Consult the dealer or an experienced radio/

TV technician for help.

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate

this equipment.

CAUTION

The use of optical instruments with this

product will increase eye hazard.

Table of Contents

With Optional Equipment

CD/MD Changer

Playing a CD or MD ......................................... 14

Scanning the tracks

— Intro Scan ................................................. 15

Playing tracks repeatedly

— Repeat Play .............................................. 15

Playing tracks in random order

— Shuffle Play .............................................. 15

Creating a program

— Program Memory ................................... 16

Labeling a CD

— Disc Memo ............................................... 18

Locating a disc by name

— List-up ...................................................... 18

Selecting specific tracks for playback

— Bank .......................................................... 19

Additional Information

Precautions ......................................................... 20

Maintenance....................................................... 21

Dismounting the unit ....................................... 21

Location of controls .......................................... 22

Specifications ..................................................... 24

Troubleshooting guide ..................................... 25

Index ................................................................... 27

This Unit Only

Getting Started

Resetting the unit ................................................ 4

Detaching the front panel .................................. 4

Preparing the rotary remote .............................. 4

Setting the clock .................................................. 5

CD Player

Listening to a CD ................................................ 5

Playing a CD in various modes ........................ 6

Creating a program

— CD Program Memory .............................. 7

Radio

Memorizing stations automatically

— Best Tuning Memory (BTM) ................... 9

Memorizing only the desired stations ............. 9

Receiving the memorized stations.................. 10

Storing the station names

— Station Memo .......................................... 10

Locating a station by name

— List-up ...................................................... 11

Other Functions

Using the rotary remote ................................... 11

Adjusting the sound characteristics ............... 13

Muting the sound.............................................. 13

Changing the sound and display settings ..... 13

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Press the reset button with a pointed object,

such as a ball-point pen.

Notes

• Pressing the reset button will erase the clock and some

memorized functions.

• When you connect the power supply cord to the unit or

reset the unit, wait for about 10 seconds before you insert

a disc. If you insert a disc within these 10 seconds, the

unit will not be reset, and you will have to press the reset

button again.

Detaching the front panel

You can detach the front panel of this unit to

prevent the unit from being stolen.

1Press (OFF).

2Press (RELEASE) to open up the front

panel. Then slide the front panel a little

to the left, and pull it off towards you.

Notes

• Be sure not to drop the panel when detaching it from the

unit.

•If you press (RELEASE) to detach the panel while the

unit is still on, the unit will turn off automatically to

prevent the speakers from being damaged.

•When you carry the front panel with you, put it in the

supplied front panel case.

Attaching the front panel

Align part Aof the front panel to part Bof

the unit as illustrated, and push until it clicks.

Notes

• Be sure not to attach the front panel upside down.

•Do not press the front panel hard against the unit when

attaching it. Press it lightly against the unit.

•Do not press hard or put excessive pressure on the

display windows of the front panel.

•Do not expose the front panel to direct sunlight, heat

sources such as hot air ducts, and do not leave it in a

humid place. Never leave it on the dashboard of a car

parked in direct sunlight where there may be a

considerable rise in temperature.

Caution alarm

If you turn the ignition key switch to the OFF

position without removing the front panel, the

caution alarm will beep for a few seconds

(only when the POWER SELECT switch is set

to the Aposition).

Preparing the rotary

remote

When you mount the rotary remote, attach the

label in the illustration below.

Reset button

(OFF)

(RELEASE)

SOUND

LIST

MODE

SOUND

LIST

MODE

Setting the clock

The clock uses a 12-hour digital indication.

Example: Set the clock to 10:08

1Press (SHIFT), then press (2) (SET UP).

1Press (4) (n).

The hour digit flashes.

2Set the hour.

3Press (4) (n).

The minute digits flash.

4Set the minute.

2Press (SHIFT).

The clock starts.

3Press (SHIFT).

After the mode setting is complete, the

display goes back to normal playback

mode.

Note

If the POWER SELECT switch on the bottom of the unit is

set to the Bposition, turn the power on first, then set the

clock.

Getting Started/CD Player

to go backward

to go forward

to go backward

SET UP

EQSUR

Set

Clock

SET UP

EQSUR

Set

1:‚‚

SOURCE

SET UP

EQSUR

Set

1‚:‚‚

SET UP

EQSUR

Set

1‚:‚‚

SOURCE

SET UP

EQSUR

Set

1‚:‚8

EQSUR

1‚:‚8

Labelled side up

Elapsed playing time

Track number

EQSUR

TRACK

5 2.15

CD Player

Listening to a CD

Simply insert the CD.

Playback starts automatically.

If a CD is already inserted, press (SOURCE)

repeatedly until “CD” appears.

Note

To play back an 8 cm CD, use the optional Sony compact

disc single adapter (CSA-8).

To Press

Stop playback 6or (OFF)

Eject the CD 6

Changing the displayed item

Each time you press (DSPL), the item changes

as follows:

Elapsed playback time ˜Clock

3Press (4) (n) to select “Intro on.”

Intro Scan starts.

4Press (SHIFT).

To go back to normal playback mode, select

“Intro off” in step 3 above.

Playing tracks repeatedly

— Repeat Play

1During playback, press (SHIFT).

2Press (6) (REP) repeatedly until

”Repeat 1“ appears.

Repeat Play starts.

3Press (SHIFT).

To go back to normal playback mode, select

“Repeat off” in step 2 above.

Playing tracks in random order

— Shuffle Play

1During playback, press (SHIFT).

2Press (7) (SHUF) repeatedly until

”Shuf 1“ appears.

Shuffle Play starts.

3Press (SHIFT).

To go back to normal playback mode, select

“Shuf off” in step 2 above.

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, press either side of

(SEEK/AMS) momentarily.

Locating a specific point in a track

— Manual Search

During playback, press and hold either

side of (SEEK/AMS). Release the button

when you have found the desired point.

Note

If “ ” or “ ” appears in the display, that

means you have reached the beginning or the end of the

disc and you cannot go any further.

Playing a CD in various

modes

You can play CDs in various modes:

•Intro (Intro Scan) lets you play the first 10

seconds of all the tracks.

•Repeat (Repeat Play) repeats the current

track.

•Shuf (Shuffle Play) plays all the tracks in

random order.

Searching for the desired track

— Intro scan

1Press (SHIFT).

Every time you press (SHIFT), only the

items you can select light up.

2Press (3) (PLAY MODE) repeatedly until

“Intro” appears.

Each time you press (3) (PLAY MODE),

the item changes as follows:

Intro ˜PGM

To search forward

To search backward

To locate succeeding tracks

To locate preceding tracks

PLAY MODE

EQSUR

Intro off

PLAY MODE

EQSUR

INTRO

Intro on

SHIFT

234567

SET UP PLAY MODE

REP SHUF

SHIFT

234567

SET UP PLAY MODE

REP SHUF

SHIFT

234567

SET UP PLAY MODE

REP SHUF

Creating a program

— CD Program Memory

You can play the tracks in the order you want

by making your own program. You can make

two programs: Program 1 and Program 2. You

can select up to 12 tracks for each program.

You can store the programs in memory.

1Press (SHIFT), then press (3) (PLAY

MODE) for two seconds.

“P 1” shows Program 1 is selected.

To select Program 2, press (4) (n)

repeatedly until “P 2” appears.

2Press either side of (SEEK/AMS) to select

the track you want.

3Press (5) (ENTER) momentarily.

4To continue entering tracks, repeat steps

2 and 3.

5When you finish selecting tracks, press

(3) (PLAY MODE) for two seconds.

6Press (SHIFT).

Notes

•“*Wait*” appears in the display while the unit is reading

the data.

•“*Mem Full*” appears in the display when you try to

enter more than 12 tracks into a program.

Playing the stored program

You can select:

•PGM 1 to play Program 1.

•PGM 2 to play Program 2.

•PGM 1+2 to play Programs 1 and 2.

1Press (SHIFT).

2Press (3) (PLAY MODE) repeatedly until

“PGM” appears.

3Press (4) (n) repeatedly until the

desired program appears.

PLAY MODE ENTER

EQSUR

TRACK

3 P1.‚1

PLAY MODE ENTER

EQSUR

TRACK

3 P1.‚2

Program 1 playback

Program 2 playback

Programs 1 and 2 playback

Normal playback

Program Play starts.

4Press (SHIFT).

To go back to normal playback mode, select

“PGM off” in step 3 above.

Note

“NO Data” appears in the display if no track is stored in

the program.

Erasing an entire program

1Press (SHIFT), then press (3) (PLAY

MODE) for two seconds.

“P 1” shows Program 1 is selected.

2Press (1) (N) repeatedly until “DEL”

appears.

To delete Program 2, press (4) (n)

repeatedly until “PGM 2” appears.

3Press (5) (ENTER) for two seconds.

The entire program is erased.

4When you finish erasing programs, press

(3) (PLAY MODE) for two seconds.

5Press (SHIFT).

PLAY MODE

EQSUR

PGM

PGM 1

PLAY MODE

EQSUR

PGM

PGM 2

PLAY MODE

EQSUR

PGM

PGM 1+2

PLAY MODE

EQSUR

PGM off

PLAY MODE ENTER

EQSUR

TRACK

7 P1.‚8

CD Player

PLAY MODE ENTER

EQSUR

NO Data

PLAY MODE ENTER

EQSUR

+Enter+

PLAY MODE ENTER

EQSUR

DEL

--PGM1--

Erasing tracks in a program

1Press (SHIFT), then press (3) (PLAY

MODE) for two seconds.

“P 1” shows Program 1 is selected.

To select Program 2, press (4) (n)

repeatedly until “P 2” appears.

2Press (1) (N) or (4) (n) to select the

track you want to erase.

The track currently registered in slot 6 of

Program 1.

3Press (5) (ENTER) for two seconds.

When you erase a track from a slot number,

the succeeding tracks shift up to fill the gap.

4To continue erasing tracks, repeat steps

2 and 3.

5When you finish erasing tracks, press (3)

(PLAY MODE) for two seconds.

6Press (SHIFT).

Track slot number

Adding tracks to a program

1Press (SHIFT), then press (3) (PLAY

MODE) for two seconds.

“P 1 ” shows Program 1 is selected.

To select Program 2, press (4) (n)

repeatedly until “P 2” appears.

2Press (1) (N) or (4) (n) to select the

track slot number where you want to

insert a track.

3Press either side of (SEEK/AMS) to select

the track you want to insert.

4Press (5) (ENTER) momentarily to enter

the track.

The current track in that slot number and

the succeeding tracks shift down.

5To continue inserting tracks, repeat steps

2 through 4.

Note

Once all 12 slots have been filled, “*Mem Full*”

appears in the display, and you cannot insert tracks.

6When you finish inserting tracks, press

(3) (PLAY MODE) for two seconds.

7Press (SHIFT).

Track slot number

PLAY MODE ENTER

EQSUR

TRACK

2 P1.‚2

PLAY MODE ENTER

EQSUR

TRACK

4 P1.‚3

PLAY MODE ENTER

EQSUR

TRACK

7 P1.‚8

PLAY MODE ENTER

EQSUR

TRACK

3 P1.‚6

PLAY MODE ENTER

EQSUR

TRACK

7 P1.‚6

PLAY MODE ENTER

EQSUR

DISC TRACK

DEL

- -- P1.‚6

Radio

Memorizing stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals and memorizes them in the order of

their frequencies. You can store up to 10

stations on each band (FM1, FM2 and AM).

Caution

When tuning in stations while driving, use

Best Tuning Memory to prevent accidents.

1Press (SOURCE) repeatedly to select the

tuner.

Each time you press (SOURCE), the source

changes as follows:

CD ˜TUNER

2Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band

changes as follows:

zFM1 zFM2 zAM

3Press (SHIFT), then press (3) (PLAY

MODE) repeatedly until “B.T.M” appears.

4Press (4) (n).

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sound and the setting is stored.

5Press (SHIFT).

Notes

•The unit does not store stations with weak signals. If

only a few stations are received, some number buttons

will retain heir former setting.

•When a number is indicated in the display, the unit

starts storing stations from the one currently displayed.

CD Player/Radio

Memorializing only the

desired stations

You can store up to 10 stations on each band

(20 for FM1 and FM2, 10 for AM) in the order

of your choice.

1Press (SOURCE) repeatedly to select the

tuner.

2Press (MODE) repeatedly to select the

band (FM1, FM2 or AM).

3Press either side of (SEEK/AMS) to tune

in the station you want to store on the

number button.

4Keep the desired number button ((1) to

(10)) pressed for two seconds until

“MEM” appears.

The number button indication appears in the

display.

Note

If you try to store another station on the same number

button, the previously stored station will be erased.

Receiving the memorized

stations

1Press (SOURCE) repeatedly to select the

tuner.

2Press (MODE) repeatedly to select the

band (FM1, FM2 or AM).

3Press the number button ((1) to (10))

momentarily where the desired station is

stored.

If you cannot tune in a preset

station

Press either side of (SEEK/AMS)

momentarily to search for the station

(automatic tuning).

Scanning stops when the unit receives a

station. Press either side of (SEEK/AMS)

repeatedly until the desired station is

received.

Note

If the automatic tuning stops too frequently, press

(SHIFT), then press (3) (PLAY MODE) repeatedly until

“Local” (local seek mode) is displayed. Then press (4)

(n) to select “Local on.” Press (SHIFT).

Only the stations with relatively strong signals will be

tuned in.

Tip

If you know the frequency of the station you want to listen

to, press and hold either side of (SEEK/AMS) for two

seconds until the desired frequency appears (manual

tuning).

If FM stereo reception is poor

— Monaural Mode

1Press (SHIFT), then press (3) (PLAY

MODE) repeatedly until “Mono” appears.

2Press (4) (n) repeatedly until “Mono

on“ appears.

The sound improves, but becomes

monaural (“ST” disappears).

3Press (SHIFT).

To go back to normal mode, select

“Mono off” in step 2 above.

Changing the displayed items

Each time you press (DSPL), the item changes

as follows: Frequency ˜Clock

Storing the station names

—Station Memo

You can assign a name to each radio station

and store it in memory. The name of the

current station appears in the display. You can

store up to eight characters for each station.

Storing the station names

1Tune in a station whose name you want

to store.

2Press (LIST) for two seconds.

3Enter the characters.

1Rotate the dial clockwise to select the

desired characters.

(A nB nC n··· Z n0 n1 n2 n

··· 9 n+ n– n*n/ n\ n> n<

n. n_ )

If you rotate the dial counterclockwise,

the characters appear in the reverse

order.

If you want to put a blank space

between characters, select “_” (under-

bar).

2Press (4) (n) after locating the

desired character.

The flashing cursor moves to the next

space.

If you press (1) (N), the flashing cursor

moves to the left.

3Repeat steps 1and 2to enter the

entire name.

4To return to normal radio reception,

press (LIST) for two seconds.

Tip

To erase/correct a name, enter “_” (under-bar) for each

character.

EQSUR

FM1

________

EQSUR

FM1

W_______

EQSUR

FM1

W_______

Otros manuales para CDX-C660 - Fm/am Compact Disc Player

Tabla de contenidos

Otros manuales de Reproductor de CD de Sony

Sony

Sony CDP-101 - Compact Disc Player Manual de usuario

Sony

Sony SCD-XA9000ES - Es Super Audio Cd Player Manual de usuario

Sony

Sony CFD-555 Manual de usuario

Sony

Sony CDX-434RF - Compact Disc Changer System Manual de usuario

Sony

Sony D-NE710 - ATRAC3/MP3 CD Walkman Portable Disc... Manual de usuario

Sony

Sony CFD-E100 Manual de usuario

Sony

Sony CFD-V15 - Cd Radio Cassette-corder Manual de usuario

Sony

Sony CDX-GT930UI - Fm/am Compact Disc Player Manual de usuario

Sony

Sony XDCAM PDW-HD1500 Manual de usuario

Sony

Sony CDP-CX151 Manual de usuario

Sony

Sony Giga Juke NAC-HD1E Manual de usuario

Sony

Sony CDX-CA760X - Fm/am Compact Disc Player Manual de usuario

Sony

Sony 2-581-922-11 Manual de usuario

Sony

Sony CDX-RA700 - Motorized Synchro-flip Detachable... Manual de usuario

Sony

Sony CDX-G3150UV Manual de usuario

Sony

Sony D-NF610 - Portable Cd Player Manual de usuario

Sony

Sony MZ-R3 Manual de usuario

Sony

Sony Walkman MZ-N910 Manual de usuario

Sony

Sony XDCAM PDW-HD1200 Manual de usuario

Sony

Sony CDX-F7005X - Fm/am Compact Disc Player Manual de usuario

Sony

Sony D-E505 Manual de usuario

Sony

Sony CDX-G1200U Manual de usuario

Sony

Sony Discman D-465 Manual de usuario

Sony

Sony Walkman D-CJ506CK Manual de usuario

Manuales populares de Reproductor de CD de otras marcas

RCA

RCA RP-7923 Manual de usuario

Pioneer

Pioneer DEH-P3550MP XM Manual de usuario

Philips

Philips AZ1207 Manual de usuario

Philips

Philips CD582 Manual de usuario

Philips

Philips AZ 6821 Manual de usuario

Lasonic

Lasonic MSU-2020 Manual de usuario

THOMSON

THOMSON RCD150 Manual de usuario

Denon

Denon DCD-1420 Manual de usuario

Panasonic

Panasonic SJ-MR100 Manual de usuario

Onkyo

Onkyo DX-7210 Manual de usuario

Denon

Denon DVM-4800 Manual de usuario

JBL

JBL MR-32 Manual de usuario

RCA

RCA RCD152 Manual de usuario

Technics

Technics SL-PS770A Manual de usuario

Clarion

Clarion compact disc Manual de usuario

Philips

Philips Expanium AZ 1538 Manual de usuario

Rotel

Rotel RCD 975 Manual de usuario

Pioneer

Pioneer CLD-D790 Manual de usuario