Sony CAC-6 Manual de usuario
RETURN VIDEO SELECTOR
CAC-6
OPERATION AND MAINTENANCE MANUAL
1st Edition (Revised 2)
このマニュアルに記載されている事柄の著作権は当社に
あり，説明内容は機器購入者の使用を目的としています。
従って，当社の許可なしに無断で複写したり，説明内容
（操作，保守等）と異なる目的で本マニュアルを使用する
ことを禁止します。
The material contained in this manual consists of
information that is the property of Sony Corporation
and is intended solely for use by the purchasers of the
equipment described in this manual.
Sony Corporation expressly prohibits the duplication
of any portion of this manual or the use thereof for any
purpose other than the operation or maintenance of the
equipment described in this manual without the express
written permission of Sony Corporation.
Le matériel contenu dans ce manuel consiste en
informations qui sont la propriété de Sony Corporation et
sont destinées exclusivement à l’usage des acquéreurs
de l’équipement décrit dans ce manuel.
Sony Corporation interdit formellement la copie de
quelque partie que ce soit de ce manuel ou son emploi
pour tout autre but que des opérations ou entretiens de
l’équipement à moins d’une permission écrite de Sony
Corporation.
Das in dieser Anleitung enthaltene Material besteht aus
Informationen, die Eigentum der Sony Corporation sind,
und ausschließlich zum Gebrauch durch den Käufer der
in dieser Anleitung beschriebenen Ausrüstung bestimmt
sind.
Die Sony Corporation untersagt ausdrücklich die
Vervielfältigung jeglicher Teile dieser Anleitung oder den
Gebrauch derselben für irgendeinen anderen Zweck
als die Bedienung oder Wartung der in dieser Anleitung
beschriebenen Ausrüstung ohne ausdrückliche
schriftliche Erlaubnis der Sony Corporation.
1
CAC-6
目次
Table of Contents
1. 取り扱い操作
1-1. 概要...................................................................................................1-1(J)
1-2. 各部の名称と働き........................................................................1-2(J)
1-3. 取り付け..........................................................................................1-3(J)
1-4. 仕様...................................................................................................1-4(J)
1. Operation
1-1. Overview ....................................................................1-1(E)
1-2. Location and Function of Parts ..................................1-2(E)
1-3. Installation..................................................................1-3(E)
1-4. Specifications .............................................................1-4(E)
2. Spare Parts
2-1. Exploded View ................................................................ 2-1
2-2. Electrical Parts List ......................................................... 2-1
2-3. Schematic Diagram ......................................................... 2-1
1-1 (E)
CAC-6
Section 1
Operation
1-1. Overview
The CAC-6 return video selector selects a return video signal of a video camera system and turns the
microphone of the headset on and off. The CAC-6 is designed to be attached to the panning rod of a
tripod. You can control the return video signal and headset microphone while operating the video camera.
The buttons on the CAC-6 are operated with a light touch of a finger so that unwanted movement of the
camera can be avoided.
The CAC-6 can be mounted on the panning rod of the following tripods. The diameter of the mounting
part is 25 mm.
Mountable tripod and panning rod
Manufacturer Tripod Panning rod
VINTEN VISION 5
VISION 10
VISION 20
VISION 30
3219-39
3219-21 (sleeve: 3219-227)
3219-35
3219-42
3219-29 (sleeve: 3219-227)
Sachtler VIDEO-17
VIDEO-18
VIDEO-20
PA-17 R/L (sleeve: 3070-11)
1-2 (E) CAC-6
1-2. Location and Function of Parts
6Connector
5Mounting part
4Lock lever
1RET 1 button
2RET 2 button
3MIC button
Location and function of parts
1RET 1 (return video 1) button
With your finger on this button, the return video 1
signal appears on the viewfinder screen. When the
button is released, the picture picked up by the camera
appears.
2RET 2 (return video 2) button
With your finger on this button, the return video 2
signal appears on the viewfinder screen. When the
button is released, the picture picked up by the camera
appears.
n
When you are touching both the RET 1 and RET 2
buttons simultaneously, the return video 1 signal
appears.
3MIC (microphone) button
With your finger on this button, the microphone of the
headset is turned on. When the button is released, the
microphone is turned off.
4Lock lever
Used to lock the mounting angle of the CAC-6.
5Mounting part
Used to mount the CAC-6 to the panning rod of a
tripod. The diameter of the mounting part is 25 mm.
6Connector (6-pin)
Used to connect to the RET CONTROL connector on a
video camera.
Pin assignment
Pin No. Signals
1 ON/OFF of the microphone for intercom 1
2 ON/OFF of the microphone for intercom 2
3 GND
4 Not used
5 ON/OFF of the return video 1 signal
6 ON/OFF of the return video 2 signal
1-3 (E)
CAC-6
1-3. Installation
The CAC-6 can be mounted to the desired position of the panning rod of a tripod at any angle the camera operator desires.
Installation examples
Camera
CAC-6
CAC-6
Installation examples
Installing the CAC-6
1. Loosen the screw on the mounting part, and
open it.
2. Clamp the panning rod with the mounting
part, and fasten the screw. Then adjust the
mounting angle and turn the lock lever to lock
the angle.
Lock lever
Panning rod
1-4 (E) CAC-6
3. Connect the connector to the RET
CONTROL connector on the video camera.
RET CONTROL
Camera
CAC-6
1-4. Specifications
Mass 300 g (11 oz)
Dimensions
MIC
RET 2
RET 1
Panning rod
Unit: mm (inches)
29 (1 3/16)
155 (6 1/8)
25 (1)
Dimensions diagram
Design and specifications are subject to change without notice.
2-1
CAC-6
2-1. Exploded View
1
7
14
15
3
3
12
4
17
2
13
5
16
16
10
16
11
6
11
98
Section 2
Spare Parts
2-2. Electrical Parts List
------------
SW-542 BOARD
------------
Ref. No.
or Q'ty Part No. SP Description
1pc 1-646-001-13 s PRINTED CIRCUIT BOARD, SW-542
CN1 1-506-485-11 o PIN, CONNECTOR 6P
R1 1-216-659-91 s RES, METAL FILM CHIP 2.2K
R3 1-216-659-91 s RES, METAL FILM CHIP 2.2K
R4 1-216-659-91 s RES, METAL FILM CHIP 2.2K
S1 1-554-303-41 s SWITCH, KEY BOARD "MIC"
S2 1-554-303-41 s SWITCH, KEY BOARD "RET 1"
S3 1-554-303-41 s SWITCH, KEY BOARD "RET 2"
2-3. Schematic Diagram
1
2
3
4
5
6
1
2
3
4
5
6
INCOM1 MIC-ON
INCOM2 MIC-ON
GND
RET3-ON
RET1-ON
RET2-ON
R1
R2
R5
R3
R4
2.2k
NM
NM
2.2k
2.2k
S1
MIC
S2
RET 1
S3
RET 2
CN101
(MALE)
- EXT VIEW -
SW-542
BOARD NO. 1-646-001-13
CN101 CN1
5
4
3
2
16
No. Part No. SP Description
1 X-3166-850-2 s CLAMP ASSY, PAN
2 1-696-712-13 s CABLE ASSY 6P
3 2-113-294-01 s CUSHION, MICROPHONE
4 2-138-306-01 s KNOB, STOPPER
5 3-178-365-01 o RETAINER, CABLE
6 3-178-366-01 o RUBBER, SWITCH
7 3-178-367-01 o SCREW (M5)
8 3-178-369-01 o TUBE, SILICON
9 3-178-370-01 o GRIP
10 3-178-372-02 o LID
11 3-178-381-02 s LABEL
12 7-621-731-08 s SET-SCT,HEX. 2X2.5,FLAT POINT
13 7-621-775-20 s SCREW +B 2.6X5
14 7-623-956-41 s WASHER 5.0, FIBER
15 7-624-108-04 s STOP RING 4.0, TYPE -E
16 7-627-556-58 s SCREW +P 2.6X5
17 7-683-419-04 s BOLT,HEXAGON SOCKET 4X8
Tabla de contenidos
Otros manuales de Accesorios para cámaras de Sony
Sony
Sony HVL-F20M Manual de usuario
Sony
Sony MPK-THK Manual de usuario
Sony
Sony SMAD-P5 Manual de usuario
Sony
Sony VCT-MP1 Manual de usuario
Sony
Sony XC-ST30 Manual de usuario
Sony
Sony XCD-SX910CR Manual de usuario
Sony
Sony AKA-CMH1 Manual de usuario
Sony
Sony SPK-HCB Manual de usuario
Sony
Sony BPU4000 Manual de usuario
Sony
Sony VCT-1500L Manual de usuario
Sony
Sony CSS-FEB Operating Instructions (primary... Manual de usuario
Sony
Sony VCT-MP1 Manual de usuario
Sony
Sony BVF-55 Manual de usuario
Sony
Sony XCD-V50 Manual de usuario
Sony
Sony MPK-THA Manual de usuario
Sony
Sony Alpha SH-L1AM Manual de usuario
Sony
Sony EVI-R10 Manual de usuario
Sony
Sony XLR-H1 Manual de usuario
Sony
Sony HDVF-EL70 Manual de usuario
Sony
Sony FA-CC1AM Manual de usuario
