Sonoff 4CH Manual de usuario
Sonoff 4CH User Guide JAN2018
Sonoff 4CH User Guide
Hi, welcome to use Sonoff 4CH! Sonoff 4CH is a 4 channel (4-way) din rail
mounting WiFi switch that can independently control the 4 home appliances.
Power supply: 90-250v AC(50/60Hz), 10A.
1. Download “eWeLink” app.
Search “eWeLink” in APP Store for iOS version or Google play for Android version.
2. Wiring instruction
There are two kinds of wiring: one for connecting 4 lights, one for connecting with
4 home appliances.
0
Sonoff 4CH User Guide JAN2018
1
Sonoff 4CH User Guide JAN2018
3. Add device
1. Power up your device.
2
Sonoff 4CH User Guide JAN2018
2. Press the first button for 7 seconds until the green LED blinks 3 times and on
repeatedly.
3. For Android, please select the 1st icon, click next.
For iOS, please select the corresponding pairing icon. Click next.
3
Sonoff 4CH User Guide JAN2018
The App will auto-search the device.
4. Input your home SSID & password:
4.1 If no password, keep it blank.
4.2 Now eWeLink only support 2.4G WiFi communication protocol, 5G-WiFi is not
supported.
5. Next, the device will be registered by eWelink and add it to your account，it
takes 1-3 minutes.
6. Name the device to complete.
4
Sonoff 4CH User Guide JAN2018
7. Maybe the device is “Offline” on eWeLink, for the device needs 1 minute to
connect to your router and server. When the green LED on, the device is “Online”,
if eWeLink shows still “Offline”, please close eWeLink and re-open.
3. APP features
1.WiFi one-to-one remote control 4 devices.
Turn on/off by tapping on device icon. Device state and real-time temperature and
humidity values will simultaneously display on the interface.
2. Share Control
The owner can share the devices to other eWeLink accounts. While sharing devices,
both should stay online on eWeLink. Because if the account you want to share is
not online, he/she will not receive the invitation message.
How to make it possible? Firstly click Share, input the eWeLink account (phone
number or email address) you want to share, tick the timer permissions
(edit/delete/change/enable) you want to give, then click Next. The other account
will receive an invitation message. Click Accept, the device has shared successfully.
The other user will have access to control the device.
3. Timing
5
Sonoff 4CH User Guide JAN2018
Support max 8 single/repeat/countdown timing schedules each device. Preset
timers can work even network is unavailable, but the device must keep power on.
4. Security mechanism
One device one owner. Other people can not add the devices that have already been
added.
5. Update
It will auto-remind you of new firmware or version. Please update as soon as you
can.
4. Problems and solutions
Read the detailed FAQ on Itead Smart Home Forum. If below answers can’t solve
your problem, please submit a feedback on eWeLink.
1. My device has added successfully but stays “Offline”.
Answers: The newly added device need 1-2 min to connect to your router and the
Internet. If it stays offline for a long time, please judge the problem by the green
led status:
6
Sonoff 4CH User Guide JAN2018
1.1. Green led quickly blinks one time and repeats, which means device failed to
connect to the router. The reason may be you have entered wrong WiFi password
or your device is too far away from the router, which causes a weak WiFi signal.
The device can not be added to the 5G-wifi-router, only the 2.4G-wifi is OK. At
last, make sure that your router is MAC-open.
1.2. Green led slowly blinks one time and repeats, which means the device has
connected to router and server but failed to be added to the device list. Then power
on the device again, if it still not working, just add the device again.
1.3. Green led quickly blinks twice and repeats, this means the device has connected
to the router but failed to connect to the server. Then please confirm your WiFi
router works normally.
2. Why the APP can’t find the device in pairing status?
Answers: That’s because of your phone’s cache. Please close the WLAN of your
phone then open it after a minute. At the same time, please power off the device if
you can, then power up to try again.
3. My WiFi is expired, can I connect the devices to LAN?
Answers: Currently this product does not support LAN. It must connect to the WiFi
router.
4. The green led keeps off, even if the device is powered on. Press the button but
the device does not work.
Answers: The circuit may be broken, please send it back for testing. Return
shipping postage and packaging will be at buyer’s expense, if the device is
damaged by the buyer, and the buyer should bear extra repair cost.
7
Otros manuales para 4CH
3
Tabla de contenidos
Otros manuales de Cambiar de Sonoff
Sonoff
Sonoff ZigBee DIY BASICZBR3 Manual de usuario
Sonoff
Sonoff Pow R2 Manual de usuario
Sonoff
Sonoff DIY TH10 Manual de usuario
Sonoff
Sonoff TX Ultimate Manual de usuario
Sonoff
Sonoff DUALR3 Manual de usuario
Sonoff
Sonoff Mini Manual de usuario
Sonoff
Sonoff DIY POWR3 Manual de usuario
Sonoff
Sonoff TX EU Manual de usuario
Sonoff
Sonoff DIY D1 Manual de usuario
Sonoff
Sonoff S-MATE Manual de usuario
Sonoff
Sonoff TH10/16 Manual de usuario
Sonoff
Sonoff T0 Manual de usuario
Sonoff
Sonoff ZigBee DIY BASICZBR3 Manual de usuario
Sonoff
Sonoff 4CH Manual de usuario
Sonoff
Sonoff DIY MINI Manual de usuario
Sonoff
Sonoff BASICR3 Manual de usuario
Sonoff
Sonoff ZigBee DIY BASICZBR3 Manual de usuario
Sonoff
Sonoff TH Origin Manual de usuario
Sonoff
Sonoff SNZB-01 Manual de usuario
Sonoff
Sonoff DIY iFan03 Manual de usuario
