SonicWALL TZ 200 Series Manual de usuario

Getting Started Guide

SonicWALL Network Security Appliances

NETWORK SECURITY

TZ 100 / TZ 200 Series

SonicWALL TZ 100/200 Series Getting Started Guide Page i

SonicWALL TZ 100/200 series

Getting Started Guide

This Getting Started Guide provides instructions for basic

installation and configuration of the SonicWALLTZ 100/200

series appliance running SonicOS Enhanced.

Document Contents

This document contains the following sections:

Setting Up Your Network - page 1

Registering Your Appliance - page 9

Enabling Security Services - page 13

Advanced Network Configuration - page 21

Advanced Deployments - page 33

Support and Training Options - page 59

Page ii

SonicWALL TZ 100/200 Series Getting Started Guide Page 1

Setting Up Your Network

In this Section:

This section provides pre-configuration information. Review this section before setting up your SonicWALL TZ 100/200 series appliance.

•System Requirements - page 2

•Recording Configuration Information - page 2

•Completing the Setup Wizard - page 4

•Accessing the Management Interface - page 5

•Verifying WAN (Internet) Connectivity - page 6

•Connecting Your Network Devices - page 6

•Troubleshooting Initial Setup - page 7

Page 2 System Requirements

System Requirements

Before you begin the setup process, verify that you have:

• An Internet connection

• A Web browser supporting Java Script and HTTP uploads.

Supported browsers include the following:

Recording Configuration Information

Record the following setup information to use during the setup

process and for future reference:

Registration Information

Networking Information

Administrator Information

Supported Browsers Browser Version

Number

Internet Explorer 6.0 or higher

Firefox 2.0 or higher

Netscape 9.0 or higher

Opera 9.10 or higher

for Windows

Safari 2.0 or higher

for MacOS

Serial Number:

Record the serial number found on the

bottom panel of your SonicWALL

appliance.

Authentication Code:

Record the authentication code found on

the bottom panel of your SonicWALL

appliance.

LAN IP Address:

. . .

Select a static IP address for your

SonicWALL appliance that is within the

range of your local subnet. If you are

unsure, you can use the default IP

address (192.168.168.168).

Subnet Mask:

. . .

Record the subnet mask for the local

subnet where you are installing your

SonicWALL appliance.

Ethernet WAN IP Address:

. . .

Select a static IP address for your

Ethernet WAN. This setting only applies if

you are already using an ISP that assigns

a static IP address.

Admin Name:

Select an administrator account name.

(default is admin)

Admin Password:

Select an administrator password.

(default is password)

SonicWALL TZ 100/200 Series Getting Started Guide Page 3

Primary Internet Service Provider (ISP) Information

Record the following information about your current ISP:

Secondary ISP Information

If applicable, record the following information about your

secondary ISP or WWAN service provider:

If you connect

via You likely

use Please record

Cable modem,

DSL with a

router

DHCP No Internet connection information is

usually required, although some service

providers require a host name.

Host Name:

Home DSL PPPoE User Name:

Password:

Note: Your ISP may require your user name

in the format: name@ISP.com

T1/E1,

Static

broadband,

Cable or DSL

with a static IP

Static IP IP Address: . . .

Subnet Mask: . . .

Default Gateway

(IP Address): . . .

Primary DNS: . . .

Secondary DNS

(optional): . . .

Dial-in to a

server PPTP Server Address:

User Name:

Password:

If you connect

via You likely

use Please record

Cable modem,

DSL with a

router

DHCP Host Name:

Home DSL PPPoE User Name:

Password:

T1/E1,

Static

broadband,

Cable or DSL

with a static IP

Static IP IP Address: . . .

Subnet Mask: . . .

Default Gateway

(IP Address): . . .

Primary DNS: . . .

Secondary DNS

(optional): . . .

Dial-in to a

server PPTP Server Address:

User Name:

Password:

Page 4 Completing the Setup Wizard

Completing the Setup Wizard

The Setup Wizard takes you through several basic steps to get

your SonicWALL TZ 100/200 series appliance configured for

your network. Use the Recording Configuration Information

section, on page 2 to record your configuration information

as you complete the wizard.

Note: If you are having trouble accessing the Setup Wizard,

see the Troubleshooting the Setup Wizard section, on

page 7 of this document.

The Setup Wizard guides you through the following steps:

Change Password—Create a new password so that only you

have access to the management interface. The default

password is “password.”

Change Time Zone—Select the correct time zone for proper

updates and time-based functionality.

WAN Network Mode—Choose your method of connecting to

the Internet. This information is provided by your Internet

Service Provider (ISP).

WAN Settings—Required for some WAN modes. This

information is also provided by your ISP.

LAN Settings—Enter custom local network address settings,

or use the default values, which work well for most networks.

LAN DHCP Settings—Allow your SonicWALL TZ 100/200

series appliance to automatically connect other local computers

by specifying a DHCP range, or use the default.

Ports Assignment—Configure the extra interfaces (X2-X5) for

different network requirements.

At the end of the wizard, a configuration summary displays. It is

recommended that you record this information in the Recording

Configuration Information section, on page 2 of this guide.

After the Setup Wizard completes, the appliance may reboot.

Please wait a few minutes while the SonicWALL appliance

reboots to save the updated firmware settings, and then

continue with the next section of this guide.

SonicWALL TZ 100/200 Series Getting Started Guide Page 5

Accessing the Management Interface

The computer you use to manage the SonicWALL TZ 100/200

series appliance must be set up to connect using DHCP, or with

a static IP address in your chosen subnet. The default subnet

for LAN zone ports is 192.168.168.x.

If your SonicWALL TZ 100/200 series appliance required a

reboot after completing the Setup Wizard, wait until the LED

is no longer lit before continuing.

To access the SonicOS Web-based management interface:

1. Enter the default IP address of http://192.168.168.168, or

the LAN IP address you chose during the Setup Wizard, in

the Location or Address field of your Web browser.

Tip: If you changed the LAN IP of your SonicWALL during

the Setup Wizard, you may need to restart your

computer for changes to take effect.

2. When the SonicWALL Management Login page displays,

enter your username and password (default values are

“admin” for user name and “password” for password).

If the System > Status page (shown below) displays, then you

have correctly configured the SonicWALL TZ 100/200 series

appliance to work with the computer on your LAN.

Page 6 Verifying WAN (Internet) Connectivity

Verifying WAN (Internet) Connectivity

Complete the following steps to confirm your Internet

connectivity:

1. In the Windows interface, launch your Web browser.

2. Enter “http://www.sonicwall.com” in the address bar and

press Enter on the keyboard. The SonicWALL website

displays. If you are unable to browse to a Website, see

“Troubleshooting Internet Connection” on page 7.

Connecting Your Network Devices

LAN

WLAN

Power

X0 X1

LAN

Console

WAN

X2 X3 X4 X5

Wireless Clients Desktop Clients Local Server

W0 WLAN X2 LAN X3 LAN X4 LAN

Good for small networks (less than 5 clients)

Easy to setup

Requires less equipment

Each interface may be congured for a

dierent zone (LAN, WAN, DMZ)

Connecting Directly

WLAN

LAN

Power

X0 X1

LAN

Console

WAN

X2 X3 X4 X5

Wireless Clients Desktop Clients

Hub/Switch

Local Server

W0 WLAN

X2 LAN

Requires extra equipment (hub/switch)

Ability to connect to multiple clients

through one port

Zone security assignment (LAN, WAN, DMZ)

can be applied to many clients on a

single interface

Connecting With a Hub/Switch

SonicWALL TZ 100/200 Series Getting Started Guide Page 7

Troubleshooting Initial Setup

This section provides troubleshooting tips for the following initial

setup topics:

•Troubleshooting the Setup Wizard - page 7

•Troubleshooting Internet Connection - page 7

•Configuring DHCP IP Addressing - page 8

Troubleshooting the Setup Wizard

• If you see the login screen, but not the Setup Wizard:

• Configure your Web browser to allow pop-ups.

• Log into the security appliance using “admin” as the

user name and “password” as the password. After

you log in, click the Wizards button at the top right.

• If you do not see the login screen or the Setup Wizard,

verify the following:

• Did you correctly enter the SonicWALL TZ 210 series

appliance management IP address, 192.168.168.168,

in your Web browser?

• Is your computer set to accept DHCP addressing or

set to a static IP address within the 192.168.168.x

subnet range? If not, see the Configuring DHCP IP

Addressing section, on page 8 for instructions.

• Is the Ethernet cable connected between your

computer and the LAN (X0) port on your SonicWALL?

• Do you need to add the SonicWALL appliance to your

list of trusted sites in your Web browser? Use the

default IP address (192.168.168.168) for this.

• Is the Test LED on the front panel of your SonicWALL

appliance lit? If the Test LED stays lit for more than a

few minutes after the initial power on sequence, power

cycle the SonicWALL appliance.

Troubleshooting Internet Connection

If you can view the SonicWALL home page, you have

configured your SonicWALL TZ 100/200 series appliance

correctly. If you cannot view the SonicWALL home page, try the

following:

•Renew your management station DHCP address if

you changed the IP address/subnet of your network

during setup.

•Restart your management station to accept new

network settings from the DHCP server in the

SonicWALL appliance.

•Restart your Internet router or modem to

communicate with the DHCP client in the SonicWALL

appliance.

•Log into the SonicOS management interface and

launch the Setup Wizard again by clicking the Wizards

button in the top right corner of the interface. Ensure

that all of your settings are correct.

Tabla de contenidos

Otros manuales de Cortafuegos de SonicWALL

SonicWALL

SonicWALL TZ670 Manual de usuario

SonicWALL

SonicWALL SOHO Wireless Manual de usuario

SonicWALL

SonicWALL TZ 150 Wireless Manual de usuario

SonicWALL

SonicWALL TZ 180 Manual de usuario

SonicWALL

SonicWALL TZ 170 SP Manual de usuario

SonicWALL

SonicWALL 1RK33-0D9 Manual del propietario

SonicWALL

SonicWALL Secure Mobile Access 6210 Manual de usuario

SonicWALL

SonicWALL CSa 1000 Manual de uso y cuidado

SonicWALL

SonicWALL Email Security 7.0 8000 Manual de usuario

SonicWALL

SonicWALL PRO 200 Manual de usuario

SonicWALL

SonicWALL TZ 170 SP Manual de usuario

SonicWALL

SonicWALL ESA 5000 Manual de usuario

SonicWALL

SonicWALL TZ 190 Manual de usuario

SonicWALL

SonicWALL TZ 150 Wireless Manual de usuario

SonicWALL

SonicWALL NSA E7500 Manual de usuario

SonicWALL

SonicWALL SMA Series Manual del propietario

SonicWALL

SonicWALL TZ270 Manual de usuario

SonicWALL

SonicWALL TZ 170 Manual de usuario

SonicWALL

SonicWALL Email Security 200 Manual de usuario

SonicWALL

SonicWALL SonicOS Enhanced 2.2 Manual de servicio

SonicWALL

SonicWALL SuperMassive 9800 Manual de usuario

SonicWALL

SonicWALL Email Security 800 Manual de usuario

SonicWALL

SonicWALL NSa 2700 Manual de usuario

SonicWALL

SonicWALL NSa 6700 Manual de usuario

Manuales populares de Cortafuegos de otras marcas

Cisco

Cisco S190 Manual de usuario

Fortinet

Fortinet FortiGate Voice Series Manual de usuario

ADTRAN

ADTRAN NetVanta 2300 Manual de usuario

SecureLogix

SecureLogix ETM System Manual de usuario

NETGEAR

NETGEAR ProSafe FVX538 Manual de usuario

Lanner

Lanner FW-8877 Manual de usuario

Huawei

Huawei USG6000 Series Manual de instalación y operación

H3C

H3C SecPath F5000-AI-15 Manual de usuario

Nexcom

Nexcom DNA 1150 Manual de usuario

Fortinet

Fortinet FortiGate-60 series Manual de usuario

Cisco

Cisco 3110 Manual

Draytek

Draytek Vigor2860 Series Manual de usuario

Lanner electronics

Lanner electronics FW-7650 Series Manual de usuario

Swisscom

Swisscom Internet Backup Manual de usuario

DPtech

DPtech FW1000 SERIES Manual de usuario

FEITIAN

FEITIAN MultiPass FIDO Manual de usuario

EBLOCKER

EBLOCKER PRO Manual de usuario

GTA

GTA GB-200 Manual de usuario