Sonel CMP-400 Manual de usuario

OPERATING MANUAL

AC CLAMP METER

CMP-400

Version 1.6

The CMP-400 digital clamp meter has been designed for the

purpose of clamp measurements of alternative current.

Furthermore, the meter may be used to measure direct and al-

ternative voltages, resistance, frequency, temperature and to test

diodes.

Main features of the CMP-400 device are the following:

•automatic or manual regulation of the measurement range,

•DATA HOLD function, which facilitates readings of measure-

ments in the case of insufficient lighting or in inaccessible plac-

es,

•ZERO function, which allows you to make measurements rela-

tive to a stored reference value,

•the function of automatic switching of the meter into the standby

mode in order to prolong the durability of batteries,

•circuit continuity sound signalling (Beeper),

•3 ¾ digits display,

•safe, protected clamp jaws,

•double molded housing.

INTRODUCTION...................................................5

SAFETY...................................................................6

2.1

INTERNATIONAL SAFETY SYMBOLS ...........................................8

PREPARATION OF THE METER FOR

OPERATION ....................................................................8

FUNCTIONAL DESCRIPTION............................9

4.1

MEASUREMENT SOCKETS AND ELEMENTS OF SELECTION OF THE

MEASUREMENT FUNCTION....................................................................9

4.1.1

Sockets..............................................................................10

4.1.2

Elements of selection of the measurement function...........10

4.2

LCD DISPLAY...........................................................................10

4.3

TEST LEADS..............................................................................12

MEASUREMENTS...............................................12

5.1

AC CURRENT MEASUREMENTS.................................................12

5.2

AC AND DC VOLTAGE MEASUREMENTS...................................13

5.3

RESISTANCE MEASUREMENTS ..................................................14

5.4

CONTINUITY MEASUREMENTS .................................................15

5.5

DIODE MEASUREMENTS...........................................................15

5.6

FREQUENCY OR %DUTY CYCLE MEASUREMENTS ....................16

5.7

TEMPERATURE MEASUREMENTS ..............................................17

5.8

NON-CONTACT AC VOLTAGE MEASUREMENTS ......................18

SPECIAL FUNCTIONS.......................................18

6.1

MANUAL RANGE SELECTION ....................................................18

6.2

RELATIVE MODE.......................................................................19

6.3

DATA HOLD FUNCTION AND BACKLIGHT DISPLAY ...............19

6.4

MODE BUTTON .......................................................................19

BEFORE YOU SEND THE METER TO BE

SERVICED......................................................................20

REPLACEMENT OF THE BATTERIES .......... 21

CLEANING AND MAINTENANCE .................. 21

STORAGE .............................................................22

DISMANTLING AND UTILIZATION ..............22

ATTACHMENTS..................................................22

12.1

TECHNICAL DATA.....................................................................22

12.2

STANDARD EQUIPMENT............................................................25

12.3

MANUFACTURER......................................................................26

1 Introduction

We appreciate your having purchased our digital clamp meter.

The CMP-400 meter is a modern, high-quality measuring device,

which is easy and safe to use. Please acquaint yourself with the

present manual in order to avoid measuring errors and prevent

possible problems related to operation of the meter.

In the present manual we apply three kinds of warnings. These

are texts in frames, which describe possible dangers both for the

user and the meter itself. The messages starting from the word

‘WARNING:’ describe situations which imply a risk for life or health

should the recommendations presented in the present manual not

be observed. The word ‘ATTENTION!’ introduces a description of a

situation where non-observance of the recommendations presented

in the present manual may imply damage for the meter. Indications

of possible problems are preceded by the word ‘Attention:’.

WARNING:

Before using the instrument acquaint yourself with the pre-

sent manual and observe the safety regulations and recom-

mendations specified by the manufacturer.

WARNING:

The purpose of the CMP-400 meter is to realise measure-

ments of the current, directs and alternative voltages, re-

sistance, frequency, temperature and diode testing. Using

the meter in a manner which does not comply with the rec-

ommendations specified in the present manual may lead to

its damage and constitutes a source of a serious risk for the

user.

WARNING:

The CMP-400 meter may be operated solely by qualified and

properly authorised personnel for work at electric installa-

tions. Using the meter by unauthorised personnel may lead

to its damage and constitutes a source of a serious risk for

the user.

2 Safety

In order to guarantee proper operation and correctness of the

obtained results it is necessary to observe the following recommen-

dations:

•Before commencing operation of the meter please acquaint

yourself thoroughly with the present manual,

•The instrument should be operated solely by properly qualified

personnel, who also must be trained regarding the industrial

safety regulations,

•Use great care when making measurements if the voltages are

greater than 25V AC rms or 35V DC. These voltages are consi-

dered a shock hazard,

•Before use for non-contact AC voltage measurements, always

test the voltage detector on a known live circuit to verify proper

operation,

•Set function switch to the appropriate position before measur-

ing,

•When measuring volts do not switch to current/resistance

modes,

•Do not exceed the maximum allowable input range of any func-

tion,

•Do not apply voltage to meter when resistance function is se-

lected,

•When changing ranges using the selector switch always dis-

connect the test leads from the circuit under test,

•Do not exceed the maximum rated input limits,

•It is prohibited to operated the meter:

⇒If it is damaged and completely or partially out of order

⇒If the insulation of the test leads has been damaged

⇒If it has been stored for an excessive period of time in inad-

equate conditions (e.g. if it is humid)

•Repairs must be realised solely by an authorised service work-

shop

WARNING:

Do not realise measurements with wet hands.

WARNING:

Do not realise measurements in environments in which there

are inflammable gases. Otherwise operation of the meter

under such conditions may cause sparking and explosion.

ATTENTION!

Input Limits

Function Maximum Input

A AC 400A

V DC, V AC 600V DC/AC

Frequency, Resistance, Diode,

Continuity , 250V DC/AC

Temperature (°C/°F) 250V DC/ AC

2.1 International Safety Symbols

This symbol, adjacent to another symbol or terminal, indi-

cates the user must refer to the manual for further infor-

mation.

This symbol, adjacent to a terminal, indicates that, under

normal use, hazardous voltages may be present

Double insulation

3 Preparation of the meter for operation

Having purchased the meter examine completeness of the con-

tents of the package.

Before measurements commence, it is necessary to realise the

following actions:

•Make sure the conditions of the batteries or accumulators per-

mit to realise measurements,

•Make sure the casing of the meter and the insulation of the test

leads are not damaged.

WARNING:

Connection of inappropriate or damaged test leads consti-

tutes a risk of an electric shock with a dangerous voltage.

4 Functional description

4.1 Measurement sockets and elements of

selection of the measurement function

Illustration 1. CMP-400

4.1.1 Sockets

11 measurement socket V/Ω/TEMP

Measurement socket for the purpose of measurements of di-

rect and alternative voltages resistance, frequency and tem-

perature.

12 measurement socket COM

Measurement socket common for all the measurement func-

tions except of current measurements (connection to the

mass of the device).

4.1.2 Elements of selection of the measurement function

1 current clamp

2 non-contact AC voltage indicator light

3 clamp trigger

4 rotational selector

Selection of function:

•OFF – meter off,

•V– direct and alternative voltage measurement,

•Ω– resistance and continuity measurement and

diode testing,

•°F –Fahrenheit temperature measurement,

•°C –Celsius temperature measurement,

•4A~ – alternative current measurement up to 4A,

•40A~ – alternative current measurement up to 40A,

•400A~ – alternative current measurement up to 400A.

5 HOLD button

•Data Hold function,

•Back Light function (after holding for 2s).

6 REL button

•Relative measurement function,

•Exit of relative measurement

7 LCD display

8 MODE button

•Changing of measurement mode

Otros manuales para CMP-400

Tabla de contenidos

Otros manuales de Instrumento de medición de Sonel

Sonel

Sonel LXP-1 Manual de usuario

Sonel

Sonel MPI-520 Manual de usuario

Sonel

Sonel PAT-810 Manual de instalación

Sonel

Sonel WAPRZ003DZBBU1I1 Manual de usuario

Sonel

Sonel MRU-200 Manual de usuario

Sonel

Sonel PQM-707 Manual de usuario

Sonel

Sonel KT-800M Manual de usuario

Sonel

Sonel MPI-536 Manual de usuario

Sonel

Sonel MRU-200 Manual de usuario

Sonel

Sonel LMW-100 Manual de usuario

Sonel

Sonel CMP-2000 Manual de usuario

Sonel

Sonel CMP-200F Manual de usuario

Sonel

Sonel MPI-502 Manual de usuario

Sonel

Sonel LKZ-710 Manual de usuario

Sonel

Sonel LXP-10B Manual de usuario

Sonel

Sonel MIC-05s1 Manual de usuario

Sonel

Sonel MPI-540 Manual de usuario

Sonel

Sonel CMP-1015-PV Manual de usuario

Sonel

Sonel MPI-506 Manual de usuario

Sonel

Sonel MPI-525 Manual de usuario

Sonel

Sonel MPI-502F Manual de usuario

Sonel

Sonel MIC-30 Manual de usuario

Sonel

Sonel PQM-702 Manual de usuario

Sonel

Sonel MPI-520 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario