Solwise 3G-431R Manual de usuario
Quick Start Guide
深圳市华美信科科技有限公司
HAME TECHNOLOGY CO., LIMITED
3G Router
431R/421R/321R/311R/221R/211R
Quick Start Guide
---------------------------------------------------------- Version: 2.0-----------------------------------------------------------
3G-431R 3G HSUPA Wifi Modem/Router
Solwise Ltd
www.solwise.co.uk
Quick Start Guide
深圳市华美信科科技有限公司
HAME TECHNOLOGY CO., LIMITED
Check Package Contents:
3G Router x1
DC9V 1A Power Adapter x1
3G External Antenna x1
WIFI External Antenna x1
RJ45 Ethernet Cable x1
CD-ROM (User Manual) x1
Quick Start Guide x1
Pedestal x1
System Requirements:
The recommended PC configuration for using the Router
is as follows:
◆CPU: Pentium 500 MHz or above
◆Memory: 128 MB RAM or above
◆Hard disk: 100 MB or above of available space
◆Operating System: Windows®2000, XP, Vista, Linux 2.4/2.6
Basic Router Set-up:
Step1: Screw the 3G and WIFI antenna to the 3G and WIFI port of Router (Figure 1).
The longer is WIFI antenna. Adjust the direction of the antenna. Normally,
upright is a good direction.
Quick Start Guide
深圳市华美信科科技有限公司
HAME TECHNOLOGY CO., LIMITED
Step2: If you access to Internet over 3G network, please insert URIM card into USIM
CARD slot (Figure 2).
Step3: If you access to Internet over other network access way, please connect the
network connection cable to xDSL/Cable Modem and WAN port (Figure 3).
Step4: Connect to Power Adapter
Connect the power adapter to DC port of Router and electrical outlet (Figure
4).
(Figure 1)
(Figure 2)
(Figure 3)
Quick Start Guide
深圳市华美信科科技有限公司
HAME TECHNOLOGY CO., LIMITED
If operation is correct, PWR LED will light. After about 10 seconds the 3G
LED will flash light. And it will take about 20 seconds for Router to complete
activation. After activation, WIFI LED will light.
Step5: Connect Router to PC or laptop，there are two connection ways for selecting.
①LAN connection: Connect the side of RJ45 Ethernet cable into LAN port,
and the other side into computer's Ethernet port (Figure 5). If the connection is
correct, the LAN LED will light.
②WIFI connection: Install Wireless Network Card in your computer. If you
have installed Wireless Network Card in your computer, it will connect to
Router over wireless network of Router.
Both the two connection ways can configure Router.
(Figure 4)
(Figure 5)
Quick Start Guide
深圳市华美信科科技有限公司
HAME TECHNOLOGY CO., LIMITED
Configure the network settings
Step1: On the desktop, right-click on “My Network Places”, select “Properties”.
(Figure 6)
Step2: In the following pop-up window, right-click on “Local Area Connection” and
select “Properties”. (Figure 7)
Step3: In the following window, select “Internet Protocol (TCP/IP)” option, then click
“Properties”. (Figure 8)
(Figure 6)
(Figure 7)
Quick Start Guide
深圳市华美信科科技有限公司
HAME TECHNOLOGY CO., LIMITED
Step4: In the following pop-up window, select “Obtain an IP address automatically”
and “Obtain DNS server address automatically”. Then click“OK”. (Figure 9)
Step5: If you selected LAN connection. Please double check if the Router is really
connected to your computer, when “Local Connection” is showing already
connected. Then click “Start” menu and open “Run” program, input “CMD”
(Figure 8)
(Figure 9)
Quick Start Guide
深圳市华美信科科技有限公司
HAME TECHNOLOGY CO., LIMITED
as figure 10.
【If you selected WIFI connection, Before step5, please click on “Wireless
Network Connection” icon in the lower right of desktop, check the wireless
network status and select your wireless network. Then connect to it.】
Step6: Input order “ping 192.168.0.1”and click “Enter”, it will get the following
result which is showing the above configuration is successful. (Figure 11)
【Note: If you connect to Internet over TD network, please input order“ping
192.168.1.1”】
(Figure 10)
(Figure 11)
Quick Start Guide
深圳市华美信科科技有限公司
HAME TECHNOLOGY CO., LIMITED
Configure 3G Router
Step1: Open Web browser, input 192.168.0.1 at Address bar, then press “Enter”.
(Figure 12)
【Note: If you connect to Internet over TD network, please input 192.168.1.1】
Step2: In the following pop-up window, both input “admin”at “User name”bar
and “Password”bar, then press “OK”. (Figure 13)
Step3: In the following pop-up window, click “WAN setting” and select the internet
connection way (Static IP Address, Dynamic IP Address, PPP over Ethernet,
3G) according to your real network environment. The introduction of four
(Figure 12)
(Figure 13)
Quick Start Guide
深圳市华美信科科技有限公司
HAME TECHNOLOGY CO., LIMITED
connection ways as follows:
①Static IP Address
If your ISP gave you a static IP Address, please select “Static IP Address”, and
input information of “WAN IP Address”, “WAN Subnet Mask”, “WAN
Router”, “Primary DNS” provided by ISP, the other options keep Windows
default. (Figure 14)
②Dynamic IP
If you have no static IP address, please select “Dynamic IP Address”, all of the
options keep Windows default. (Figure 15)
(Figure 14)
Quick Start Guide
深圳市华美信科科技有限公司
HAME TECHNOLOGY CO., LIMITED
③PPP over Ethernet
If you connect to Internet over ADSL modem, please select “PPP over
Ethernet”, and input the information of “PPPoE User Name”, “PPPoE
Password” that provided by ADSL ISP , and the other options keep Windows
default. (Figure 16)
(Figure 15)
Otros manuales para 3G-431R
1
Tabla de contenidos
Otros manuales de Enrutador inalámbrico de Solwise
Solwise
Solwise A10W Manual de usuario
Solwise
Solwise 3G11nMRW Manual de usuario
Solwise
Solwise 3GWIFIMRW Manual de usuario
Solwise
Solwise 3G-431R Manual de usuario
Solwise
Solwise 53R-EXT Manual de usuario
Solwise
Solwise UltraSkyM18P1 Manual de usuario
Solwise
Solwise PLV-500AV-PEWN Manual de usuario
Solwise
Solwise M18P1 Series Manual de usuario
Solwise
Solwise NET-PL-200AV11NRT Manual de usuario
Solwise
Solwise 605EW Manual de usuario
