Solplanet ASW LT-G2 Series Manual de usuario
UM0011_ASW 30-50K-LT-G2_EN_V03_1121 1
ASW LT-G2 series inverter Table of Contents
1 Notes on this Manual ................................................................ 4
1.1 General Notes ..................................................................... 4
1.2 Area of Validity .................................................................... 4
1.3 Target group ....................................................................... 5
1.4 Symbols used in this manual .............................................. 6
2 Safety ........................................................................................ 7
2.1 Intended use ....................................................................... 7
2.2 Important safety information ................................................ 8
2.3 Symbols on the label ......................................................... 10
3 Unpacking ............................................................................... 11
3.1 Scope of delivery .............................................................. 11
3.2 Check for transport damage .............................................. 12
4 Mounting ................................................................................. 13
4.1 Requirements for mounting ............................................... 13
4.2 Mounting the inverter ........................................................ 17
5 Electrical connection ............................................................... 21
5.1 Safety ................................................................................ 21
5.2 Electrical Connection Panel .............................................. 22
5.3 Electrical connection diagram with a separate DC isolator22
5.4 AC Connection .................................................................. 23
5.4.1 Conditions for the AC connection ............................... 23
5.4.2 Grid connection .......................................................... 27
5.4.3 Additional grounding connection................................. 28
5.5 DC connection .................................................................. 29
2 UM0011_ASW 30-50K-LT-G2_EN_V03_1121
5.5.1 Requirements for the DC connetion ........................... 29
5.5.2 Assembling the DC connectors .................................. 30
5.5.3 Disassembling the DC connectors .............................. 32
5.5.4 Connecting the PV Array ............................................ 33
5.6 Conmunication equipment connection .............................. 35
5.6.1 Mounting the WiFi or 4G Stick .................................... 35
5.6.2 Connect the communication line with RJ45 socket ..... 36
5.6.3 Connect the communication line with terminal block .. 39
5.6.4 Connect the smart meter cable ................................... 40
6 Communication ....................................................................... 40
6.1 System monitoring via WLAN or 4G.................................. 40
6.2 Active power control with Smart meter .............................. 42
6.3 Remote firmware update ................................................... 43
6.4 Active power control via demand response enabling device
(DRED) ................................................................................... 43
6.5 Communication with the third party device ........................ 44
6.6 Earth fault alarm ................................................................ 44
7 Commissioning ....................................................................... 44
7.1 Electrical check ................................................................. 44
7.2 Mechanical check ............................................................. 46
7.3 Safety code check ............................................................. 46
7.4 Start-up ............................................................................. 46
8 Display .................................................................................... 48
8.1 Overview of the control panel ............................................ 48
8.2 LED indicators ................................................................... 48
9 Disconnecting the inverter from voltage sources .................... 49
UM0011_ASW 30-50K-LT-G2_EN_V03_1121 3
10 Technical data ....................................................................... 51
10.1 DC input data .................................................................. 51
10.2 AC output data ................................................................ 53
10.3 General data ................................................................... 57
10.4 Safety regulations ........................................................... 58
10.5 Tools and torque ............................................................. 59
11 Troubleshooting .................................................................... 60
12 Maintenance ......................................................................... 64
12.1 Cleaning the contacts of the DC-switch .......................... 64
12.2 Cleaning the heat sink ..................................................... 64
13 Recycling and disposal ......................................................... 65
14 EU Declaration of Conformity ................................................ 65
15 Warranty ............................................................................... 66
16 Contact.................................................................................. 66
4 UM0011_ASW 30-50K-LT-G2_EN_V03_1121
1 Notes on this Manual
1.1 General Notes
ASW LT-G2 series inverter is a three-phase transformerless
string inverter with three to five independent MPPTs. It converts
the direct current (DC) generated by the photovoltaic (PV)
module into a three-phase alternating current (AC) and feeds it
into the utility grid.
1.2 Area of Validity
This manual describes the mounting, installation, commissioning
and maintenance of the following inverters:
ASW50K-LT-G2
ASW45K-LT-G2
ASW40K-LT-G2
ASW36K-LT-G2
ASW33K-LT-G2
ASW30K-LT-G2
Please read this manual carefully before using this product, keep
it in a convenient place and make it available at all times.
UM0011_ASW 30-50K-LT-G2_EN_V03_1121 5
1.3 Target group
This document is for qualified electricians only, who must perform
the tasks exactly as described.
All persons installing inverters must be trained and experienced
in general safety which must be observed when working on
electrical equipment. Installation personnel should also be
familiar with local requirements, rules and regulations.
Qualified persons must have the following skills:
• Knowledge of how an inverter works and is operated
• Training in how to deal with the dangers and risks associated
with installing, repairing and using electrical devices and
installations
• Training in the installation and commissioning of electrical
devices and installations
• Knowledge of the applicable laws, standards and directives
• Knowledge of and compliance with this document and all safety
information.
6 UM0011_ASW 30-50K-LT-G2_EN_V03_1121
1.4 Symbols used in this manual
Safety instructions will be highlighted with the following symbols:
DANGER indicates a hazardous situation which, if not be
avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not be
avoided, can result in death or serious injury.
CAUTION indicates a hazardous situation which, if not be
avoided, can result in minor or moderate injury.
NOTICE indicates a situation which, if not be avoided, can
result in property damage.
INFORMATION that is important for a specific topic or goal,
but is not safety-relevant.
UM0011_ASW 30-50K-LT-G2_EN_V03_1121 7
2 Safety
2.1 Intended use
1. ASW LT-G2 series inverter converts the direct current from
the PV arrays into grid-compliant alternating current.
2. ASW LT-G2 series inverter is suitable for indoor and outdoor
use.
3. ASW LT-G2 series inverter must only be operated with PV
arrays (PV modules and cabling) of protection class II in
accordance with IEC 61730, application class A. Do not
connect any sources of energy other than PV modules to
ASW LT-G2 series inverter.
4. PV modules with a high capacity to ground must only be used
if their coupling capacity does not exceed 5.0μF.
5. When the PV modules are exposed to light, a DC voltage is
supplied to this inverter.
6. When designing the PV power plants, ensure that the values
comply with the permitted operating range of all components
at all time.
7. The product must only be used in countries for which it is
approved or released by AISWEI and the grid operator.
8. Use this product only in accordance with the information
provided in this documentation and with the locally applicable
standards and directives. Any other application may cause
personal injury or property damage.
9. The type label must remain permanently attached to the
product.
8 UM0011_ASW 30-50K-LT-G2_EN_V03_1121
2.2 Important safety information
Danger to life due to electric shock when live components or
cables are touched
• All work on the inverter must only be carried out by qualified
personnel who have read and fully understood all safety
information contained in this manual.
• Do not open the inverter.
• Children must be supervised to ensure that they do not play
with the inverter.
Danger to life due to high voltages of the PV array
When exposed to sunlight, the PV array generates dangerous
DC voltage which is present in the DC conductors and the live
components of the inverter. Touching the DC conductors or
the live components can lead to lethal electric shocks. If you
disconnect the DC connectors from the inverter under load,
an electric arc may occur leading to electric shock and burns.
• Do not touch non-insulated cable ends.
• Do not touch the DC conductors.
• Do not touch any live components of the inverter.
• Have the inverter mounted, installed and commissioned only
by qualified persons with the appropriate skills.
•If an error occurs, have it rectified by qualified persons only.
•Prior to performing any work on the inverter, disconnect it
from all voltage sources as described in this document (see
Section 9
"Disconnecting the Inverter fro
m Voltage Sources").
UM0011_ASW 30-50K-LT-G2_EN_V03_1121 9
Risk of injury due to electric shock
Touching an ungrounded PV module or array frame can
cause a lethal electric shock.
• connect and ground the PV modules, array frame and
electrically conductive surfaces so that there is continuous
conduction.
Risk of burns due to hot enclosure parts
Some parts of the enclosure can get hot during operation.
• During operation, do not touch any parts other than the
enclosure lid of the inverter.
Damage to the inverter due to electrostatic discharge
Internal components of the inverter can be irreparably
damaged by electrostatic discharge.
• Ground yourself before touching any component.
Este manual sirve para los siguientes modelos
6
Tabla de contenidos
Otros manuales de Inversor de Solplanet
Solplanet
Solplanet ASW H-S Series Manual de usuario
Solplanet
Solplanet ASW T Series Manual de usuario
Solplanet
Solplanet ASW75K-LT Manual de usuario
Solplanet
Solplanet ASW S-A Series Manual de usuario
Solplanet
Solplanet ASW H-T1 Series Manual de usuario
Solplanet
Solplanet ASW H-S2 Series Manual de usuario
Solplanet
Solplanet ASW S-G2 Series Manual de usuario
Solplanet
Solplanet ASW3K-LT-2 Pro Manual de usuario
Solplanet
Solplanet ASW LT-G2 Pro Series Manual de usuario
Solplanet
Solplanet ASW 3-6K S G2 Series Manual de usuario
Solplanet
Solplanet ASW45K-LT-G3 Manual de usuario
Solplanet
Solplanet ASW30K-LT-G2 Manual de usuario
Solplanet
Solplanet ASW LT Series Manual de usuario
Solplanet
Solplanet ASW08KH-T1 Manual de usuario
Solplanet
Solplanet ASW S Series Manual de usuario
Solplanet
Solplanet ASW S-GW Series Manual de usuario
Solplanet
Solplanet ASW LT G2 Series Manual de usuario
Solplanet
Solplanet ASW30K-LT-G2 Manual de usuario
Solplanet
Solplanet ASW6000-S Manual de usuario
Solplanet
Solplanet ASW3000-T Manual de usuario
