Soliom S90 Manual de usuario
Outdoor Wireless Solar Camera
Model: S90
R
8335540901 Please text us for any product issues
Thanks for purchasing from Soliom.
Having issues with your Soliom cameras?
Please through either ways below.
Soliom care team staffs would offer you a best
solution to solve any problems within .
Register via below link to get
.
contact us
24 hours
2 Years Extended
Warranty
https://soliom.net/pages/product-registration
Contact Us:
If this manual is not clear enough to
read,please download a PDF file via
below link:
https://soliom.net/pages/download
Warranty Service
Join Soliom Customer group for instant help:
https://www.facebook.com/groups/soliomvip/
15-18
5-14
19-26
Part 5: How to Save and Delete Videos...................27
Part 6: More Settings.............................................................28
1. Soliom S90 can only be set up with 2.4g Wi-Fi network. (It's ok to
use Cell phone 4G data to live viewing it after the camera was set
up with 2.4g Wi-Fi network firstly.)
3. You may possibly need a Wi-Fi extender if your Wi-Fi signal is
weak around the yard where you want to install it.
4. At least 1-3 hours direct sunlight to the camera every day is
needed, the more sunshine the better to avoid manually charge
it frequently. (North side of the house is not a recommended
installation place)
5. Please charge your Soliom camera before you set it up, it
usually takes up to 10-12 hours to fully charge it.Do not use any
power adaptor exceed 5V/2A,or it may damage the camera.
(There's no indicator to show charging status from the camera)
6. Make sure the distance between your phone,router and the
camera is no more than 1.5 feet when you're ready to pair the
camera. Ensure that the Wi-fi signal strength on your phone is
good.
7. The PIR range is 24 feet around,the recommend camera install
height is 8 feet around.To avoid too much false alarms, we
suggest you do not install the camera with nearby bushes,shrubs,
grasses and tree leaves coming into the PIR range.
8. To ensure an accurate motion detection funtion,it is suggested
to adjust the camera angle physically to focus the motion area
within the PIR suggested 24ft range.
9. If you install the camera on stucco,brick or concrete surface,
please mark 4 holes matching the drill template and then use a drill
driver to drill into the wall and insert the expansion screws to
hold the camera tightly
2. When the battery runs out, the camera can only turn on
automatically after the camera is charged more than 4 hours.
Very Important Tips
USB port
Micro-SD USB Port
Reset
Power
Power Reset
Cable for connecting external
solar panel
Bracket
Solar Panel
Micro-SD USB Port
Power Reset
Micro-SD USB Port
Power Reset
Micro-SD USB Port
Power Reset
3
Please charge the camera about 10-12 hours by plugging it
into a power source using the provided USB cable. After
connecting the camera with App, the App will indicate the
battery status.
Charging
Before Installation
Install a micro SD card
Please insert your micro sd card to the slot correctly according to
the below picture. the camera only support class 10 above quality
micro sd card from capacity 8GB to 64GB.
(There's no indicator to show charging status
from the camera)
SD Card
The text face up
4
4 x Expansion Screws
1 x USB Cable
2 x Luminescent
Warning Sticker 1 x User Manual
Package Content
Before Installation
1 x Bracket
Camera
1 x Allen key 1 x Allen key
1 x Position Paper
Outdoor Wireless Solar Camera
Model: S90
R
Stick the position paper on the
wall where you want to install
the camera,and drill hole on
the red circle
Tear off after drilling
5
1. Download the App (works only with iOS & Android devices)
Please locate the in your Google Play store or
to download the soliom+ App.
SOLIOM+ App store
In-App Setup
Make sure the distance between your phone,router
and the camera is no more than 1.5 feet when you're
ready to pair the camera.Ensure that the Wi-fi signal
strength on your phone is good.
Tips:Please Allow below 2 permissions when use this App at first time.
1. Allow"SOLIOM+" use mobile cellular data and wireless LAN,
otherwise it may be failed to add S90 camera.
2. Allow "SOLIOM+" to get system push message and location
permissions
6
In-App Setup
Open the App and register your account with your email
address.
(1)Please set a password for your account and make note
to remember it.
(2)Please click "Allow" or "Agree" on all access when you
download soliom+ and during the process of setting up
your account so that the can have full access to soliom+
your camera and phone. otherwise, your camera may
have less function or incomplete setups.
2. Register an account
Click”Add family” and then input your desired family
name, click “next step” and then input required information,
and then click “finished” to save it.
3. Set up the installed location
please pay attention to choose your right "Country/Region"
so that you can connect the camera smoothly later and get
proper notifications from your correct region server
Note: The required fields are country and state.
7
In-App Setup
Micro-SD USB Port
Power Reset
Press the power button to turn on the camera, after 3
seconds, LED flashes blue. Then you will hear the following
voice “The camera is now ready to begin pairing”.
4. Turn on the camera
How to turn off the camera?
Press and hold on the “power” button for 5 seconds, after
you hear music, LED will go off, which means the camera
has been turned off.
Flashes blue
Otros manuales para S90
1
Tabla de contenidos
Otros manuales de Cámara digital de Soliom
