Solidat MicroScan Manual de usuario

MicroScan

User Manual

MicroScan User’s Manual

Important Notice

This manual is delivered subject to the following conditions

and restrictions:

)This manual contains proprietary information belonging

to Solid Applied Technologies Ltd. Such information is

supplied solely for the purpose of assisting explicitly and

properly authorized users of MicroScan.

)No part of its contents may be used for any other

purpose, disclosed to any person or firm or reproduced

by any means, electronic or mechanical, without the

express prior written permission of Solid Technologies

Ltd.

)The text and graphics are for the purpose of illustration

and reference only. The specifications on which they

are based are subject to change without notice.

)Information in this document is subject to change

without notice. Corporate and individual names and

data used in examples herein are fictitious unless

otherwise noted.

MicroScan is a trademark of Solid Applied Technologies Ltd.

Other company and brand products and service names are

trademarks or registered trademarks of their respective

holders.

Date Revision Software Version Catalog Number

Feb.2004 1.5 4.09 English 6800200

Safety Guidelines

iii

Safety Guidelines

)MicroScan must be installed, connected and

operated according to the instructions in this

Manual.

)If installed incorrectly or used for applications for

which it is not intended, application-related dangers

may arise.

)Only qualified personnel are authorized to install

and operate MicroScan.

)Do not open the MicroScan unit. If the unit is opened,

the warranty is null and void.

)Modifications and repairs to MicroScan are

permissible only when the manufacturer expressly

approves them.

MicroScan User’s Manual

Table of Contents

Chapter 1: Introducing MicroScan............................................... 1

MicroScan Specifications .............................................................................. 3

Measuring Ranges................................................................................. 3

Mechanical Specifications .................................................................... 4

Electrical Specifications ........................................................................ 4

MSU (MicroScan Setup Unit) Specifications ................................................. 4

Sensor Recommendations..................................................................... 5

Chapter 2: Installing MicroScan................................................... 6

Precautions ................................................................................................... 6

Installing MicroScan...................................................................................... 7

Installing MicroScan on Threaded Flange/Thread-Free Flange .............. 8

Installing MicroScan via Extension Pipes .............................................. 9

Connecting the MicroScan to a Power Cable ..................................... 11

Connecting the MicroScan to the MSU .............................................. 12

Non-Intrinsically Safe Connections ..................................................... 13

Chapter 3: Setting Up and Calibrating MicroScan ..................... 15

Using MicroScan Functions......................................................................... 18

Resetting MicroScan.................................................................................... 21

Entering the Tank Height Value .................................................................. 22

Defining Interfering Signals......................................................................... 24

Configuring 4 mA Current Output .............................................................. 27

Configuring 20 mA Current Output ............................................................ 30

Selecting Low/High Dynamic Speed (Open Channels and Liquid Only)..... 32

Table of Contents

Defining Working Area ............................................................................... 33

Selecting Distance or Level Display ............................................................ 35

Restoring the Default Settings ..................................................................... 37

Shifting the Blocking Distance..................................................................... 38

Verifying the Version Number..................................................................... 39

Defining 22mA Signal Error Messages ........................................................ 39

Chapter 4: Troubleshooting MicroScan ......................................41

22mA Signal Error Messages ............................................................... 42

Index..........................................................................................44

MonoScan User’s Manual

Table of Figures

Figure 1: Front View of MicroScan..................................................................... 2

Figure 2: Side View of MicroScan ...................................................................... 2

Figure 3: Threaded Flange/Thread-Free Flange Mounting .................................. 8

Figure 4: MicroScan Power Connections ......................................................... 11

Figure 4.1: MSU Communication Connector ................................................... 12

Figure 5: Non-Intrinsically Safe Positive Ground Connection........................... 13

Figure 6: Non-Intrinsically Safe Negative Ground Connection......................... 13

Figure 7: MSU Mounted on the MicroScan Unit .............................................. 16

Figure 8: MicroScan Functions Menus ............................................................. 17

Figure 9: MSU Display and Function Buttons .................................................. 18

Figure 10: Scan Distance Process..................................................................... 24

Figure 11: Working Area.................................................................................. 33

Introducing MicroScan

CHAPTER 1

Chapter 1

Introducing MicroScan

MicroScan is an ultrasonic, non-contact level measurement

device of mono-block construction (combing the sensor and

electronic components in a single unit). MicroScan provides

reliable and precise level measurement results of both liquids

and solids.

It can be used for the following measurement tasks:

)Liquid tanks with calm surfaces

)Solids tanks that are dust-free

MicroScan has a range of up to 5 m (16.5 ft) with an

accuracy of approx. 0.25% within that range.

MicroScan is available in two configurations:

)MicroScan with no display and no keyboard ("Blind" unit)

)MicroScan with optional display but without keyboard

The following models are available for each configuration:

)MicroScan L for liquids

)MicroScan S for solids

MicroScan User’s Manual

The following diagrams show the front and side views of

MicroScan, and its dimensions:

Figure 1: Front View of MicroScan Figure 2: Side View of MicroScan

Introducing MicroScan

CHAPTER 1

MicroScan Specifications

Accuracy 0.25%* of measuring range

Resolution 1 mm (0.04")

Beam angle 5°@ 3db point

Ambient temp’

compensation

Automatic

* 0.25% or 1.25cm whichever is greater.

Measuring Ranges

MicroScan L for liquids 0.25 m — 5 m

0.8 ft — 16.4 ft

MicroScan S for solids 0.25 m — 3.5 m

0.8 ft — 11.5 ft

Mechanical Specifications

Enclosure IP 65, mono-block construction.

Plastic enclosure: ABS+UV

Wetted parts Sensor body: PolyProp. PVDF, optional.

Stainless Steel for Liquid model; Coated

Aluminum for Solid/Liquid model.

Operating

temperature

-40°C to + 70°C

(-40°F to +158°F)

Mounting 2" BSP or 2" NPT

MicroScan User’s Manual

Mechanical fitting Conduit connection M20x2.5 or

1/2" NPT

Operating pressure Atmospheric

Dimensions 22.3 x 11 x 4.5cm (8.7 x 4.3x 1.7in)

Weight Approx. 0.75Kg (1.65lb)

Electrical Specifications

Optional Display LCD, four digits, seven segments

Operation Four push buttons

Loop current 4 — 20 mA, 750 Ω@ 28 VDC

Supply 12 — 28 VDC (CE certified)

Certificates CE — EMC

MSU Specifications

Display LCD (4 digits — 7 segments)

Keyboard 4 buttons

Cable 0.60m (23.6in)

Housing material ABS + UV

Dimensions 9.5X11X2.5cm (3.7X4.3X0.98 in)

Weight 0.25 Kg (0.55 lb)

Certifications CE

Tabla de contenidos

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario

solidat MicroScan Manual de usuario

Manuales populares de Instrumento de medición de otras marcas