* Under [CH]，press ENTER into DMX512 channel setting.
* Press UP/DOWN to select channel CH06 or CH24，press ENTER to save the selection. Press
MENU to the previous setting.
(8) Sound sensitivity setting
*Under [SEnS], press ENTER into Sound sensitivity setting
*Press UP/DOWN to increase/decrease sensitivity value 001—100, press ENTER to save the
setting. Value increase, sensitivity higher
Troubleshooting
1. If the power supply indicator doesn't light up and the light doesn't work, please check the
power supply, the input voltage and the fuse.
2. In Stand-Alone operation, if the power supply indicator is light up and sound active indicator
isn't light up, but the light is shut off doesn't work.
A. Because sound is too small make for light shut off in sound active, please increase the music
volume or increase audio sensitivity with sensitivity knob, please check as below.
B. Please check if unit has been set up in slave mode, then set up in master mode.
3. In Master-Slave operation, slave unit don't function, please check as below.
A. Make sure to there's only one master in the chain, and the others are set in slave mode.
B. Make sure to control the unit without DMX console controlling.
C. Make sure to take a good quality power cable and connection.
Warranty Warnings:
1. Damages caused by the disregard of this user manual are not subject to Warranty.
The dealer will not accept liability for any resulting defects or problems.
2. Please consider that unauthorized modifications on the device are forbidden due to safety
reasons. Please note that damages caused by manual modifications on the device or
unauthorized operation by unqualified persons are not subject to warranty.
3. If this device will be operated in any way different to the one described in this manual, it may
suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to
dangers like short-circuit, burns electric shock, etc.
After trying the above solution you still have a problem, please contact your dealer or our
company for service.
Page 12
General Instructions
Unpacking:
Thank you for purchasing this product. Please read user guide for safety and operations
information before using the product. Keep this manual for future reference. This product can
create perfect light programs and effects since it has passed a series of strictly tests before
delivery. Please check the attachments listed on the page after opening the carton.
Immediately upon receiving a fixture, carefully unpack the box. Check the box contents to
ensure that all parts are present and that they are in good condition. If any part appears
damaged from shipping, or if the box shows signs of mishandling, notify the shipper
immediately. In addition, retain the box and all the packing material for inspection. In any
event, save the carton and all packing material because, in case that you have to return the
fixture to the factory, you will have to do so in its original box, with its original packing.
What is included: 1* Light, 1*Power Cable, 1*User Guide
Safety Notice:
Please read the following notes carefully because they include important safety information
about the installation, usage and maintenance of this product. It is important to read all these
notes before starting to work with this product.
