Solectek SkyWay-Net Manual de usuario

SkyWay Series Multi-Point Operator’s Guide

SkyWay Series

Multi-Point

Operator’s Guide

for SkyWay-Net and SkyMate

Wireless Bridge/Routers

About This Manual

The information contained in this document is subject to change without notice.

Solectek Corporation shall not be liable for errors contained herein or for

incidental or consequential damage in connection with the furnishing,

performance, or use of this material. Reproduction, adaptation, or translation

without prior written permission is prohibited, except as allowed under the

Solectek Corporation makes no warranty of any kind with regard to this material,

including, but not limited to, the implied warranties or merchantability and fitness

for a particular purpose.

Document Version: 1.00

Part Number: 1288601

For use with SkyWay-Net and SkyMate software versions 3.0 and higher.

Trademarks & Copyrights

SkyWay is a registered trademark of Solectek Corporation

Solectek is a trademark of Solectek Corporation.

IBM and AT are registered trademarks of International Business Machines

Corporation.

Microsoft and MS-DOS are registered trademarks of Microsoft Corporation.

Novell and NetWare are registered trademarks of Novell, Inc.

Other trademarks are the property of their respective holders.

Contacting Technical Support

Contact SOLECTEK Corporation’s Technical Support Department during normal

business hours: Monday through Friday, 8:00 a.m. to 5:00 p.m., Pacific Time or

submit questions to our 24-hour fax number or by e-mail.

Voice support: (858) 450-1220

24-hour fax number: (858) 457-2681

Web support: http://www.solectek.com/support/

E-mail address: [email protected]

Please have the following information ready when you call:

•Model Number

•Type of Ethernet connection your SkyWay Series Bridge/Router

•Network operating system, e.g., Novell Netware, etc.

•Application using when problem was encountered, e.g., MS-Excel, etc.

SkyWay Series Multi-Point Operator’s Guide

iii

•Symptoms and/or error codes that accompanied the problem

•Most recent bench test results

Safety

Electrical Guidelines

Observe the following electrical guidelines when working on the SkyWay Series

Bridge/Router.

•Do not work on the system or connect or disconnect cables under these

conditions:

- During a thunderstorm

- When wearing a wool sweater or other heavy wool clothing

- When power is applied

•Always ensure the power is off before connecting or disconnecting the 3

pin power cord connector.

•Do not touch the SkyWay Series power supply when the power cord is

connected. Because the SkyWay Series Bridge/Router does not have a

power switch, line voltages are present within the power supply when the

power cord is connected to the Bridge/Router.

•The SkyWay Series Bridge/Router relies on the building’s installation for

short-circuit (overcurrent) protection. Make sure that a fuse or circuit

breaker not larger than 120 VAC, 15A U.S. (240 VAC, 10A international)

is used on the phase conductors (all current-carrying conductors).

•Before working on the SkyWay Series chassis, unplug the power cord

from the AC outlet or disconnect the fuse or circuit breaker.

•Locate the emergency power-off switch for the AC source connected to

the SkyWay Series Bridge/Router. If an electrical accident occurs, use this

switch to turn off power to the bridge.

•Identify possible hazards in your work area, such as moist floor,

ungrounded power extension cables, and missing safety grounds. Do not

work alone if potentially hazardous conditions exist.

•Ungrounded or improperly grounded antennas constitute a hazard to

personnel and equipment. A lightning strike on or near an improperly

grounded antenna can cause severe injury or death as well as equipment

destruction.

About This Manual

Regulatory Information

The SkyWay Series Wireless Bridge/Routers operate in the 2.4 GHz band,

complies with the IEEE 802.1D MAC bridging standard and supports SNMP

monitoring if IP routing is enabled.

FCC Radio Frequency Interference Statement

These devices are certified to comply with Part 15 of Federal Communications

Commission (FCC) Rules. Operation are subject to the following two conditions:

1. May not cause harmful interference.

2. Must accept any interference that may cause undesired operation.

Industrie Canada Radio Frequency Interference Statement

These devices are certified to comply with Industrie Canada (IC) RSS/CNR 139.

Operation are subject to the following two conditions:

1. May not cause harmful interference.

2. Must accept any interference that may cause undesired operation.

U.S. Government Restricted Rights Legend

The SkyWay Series products are provided with Restricted Rights. Use,

duplication, reproduction or disclosure by the Government is subject to

restrictions in subdivision (c)(1)(ii) of the Rights in Technical Data and Computer

Product clause at 252.227-7013 and in subparagraphs (a) through (d) of the

Commercial Product-Restricted Rights Clause at 52.227-19. Contractor/

Manufacturer is Solectek, 6370 Nancy Ridge Drive, Suite 109, San Diego,

California.

In order to comply with FCC RF exposure requirements, a minimum

separation distance of 27 in. must be maintained between the antenna and

any persons. When installing the antenna, ensure that this clearance is maintained

while the product is in operation.

These devices must be installed and used in strict accordance with the

manufacturer's instructions. However, there is no guarantee that interference to

radio communications will not occur in a particular commercial installation. In

case these devices do cause harmful interference with an authorized radio service,

the user/operator shall promptly stop operating these devices until harmful

interference has been limited. Solectek Corporation is not responsible for any

radio or television interference caused by unauthorized modification of these

devices or the substitution or attachment of connecting cables and equipment other

than specified by Solectek Corporation. The correction of interference caused by

such unauthorized modification, substitution, or attachment will be the

responsibility of the user.

SkyWay Series Multi-Point Operator’s Guide

Radio Transmission Notice

These products are low power (less than 1 Watt), direct-sequence, spread-

spectrum radio systems pre-set to transmit and receive signals in the 2.4-2.4835

GHz frequency band. These products have been certified by the U.S. Federal

Communications Commission for use in the United States of America in that

band. The manufacturer makes no representation as to the availability of the

above-mentioned frequency band for such use in other countries.

Any prospective user of these products outside the United States of America

should, prior to such use, contact the government department or other agency

responsible for assigning radio frequencies in the country in which use is proposed

to determine whether such department or agency has any objection to operation of

these products in the 2.4-2.4835 GHz band, and whether there are any other local

devices generating signals in that band which might be expected to interfere with

the operation of these products.

Solectek shall not be responsible for any operation of these products which is in

violation of local law, creates interference harmful to other local devices, or results

in a malfunction of these products caused by outside interference.

About This Manual

SkyWay Series Multi-Point Operator’s Guide

vii

Table of Contents

About This Manual.....................................................................ii

Trademarks & Copyrights..........................................................ii

Contacting Technical Support....................................................ii

Safety.........................................................................................iii

Electrical Guidelines..........................................................................iii

Regulatory Information.............................................................iv

FCC Radio Frequency Interference Statement .............................. iv

Industrie Canada Radio Frequency Interference Statement ........ iv

U.S. Government Restricted Rights Legend ................................... iv

Radio Transmission Notice .................................................................v

Preface.................................................................. xiii

Intended Audience...................................................................xiii

Using This Guide ....................................................................xiv

Chapter 1:Getting to Know Your SkyWay Series...1

General Description....................................................................1

Navigating Through Menus and Screens ...................................2

Dot Commands...........................................................................3

Table of Contents

viii

How Screens Display Information.............................................4

Editing Fields........................................................................................4

Field Types ......................................................................................4

Saving Configuration Changes...........................................................5

Changes that Require Cycling or Resetting ......................................5

Cycling a port...................................................................................5

Resetting the Unit ............................................................................5

Chapter 2:Configuring Your SkyWay Series Unit(s)7

Basic Configuration....................................................................8

Configuring User Access .....................................................................8

Adding a User..................................................................................9

Viewing Users..................................................................................9

Changing a User’s Password ...........................................................9

Accessing the SkyWay Series Bridge/Router..................................10

Local Access using the Console ....................................................10

Connecting the Console.................................................................11

Opening a Console session using Hyperterminal ..........................12

Remote Access Using Telnet .............................................................12

WCOPP-AP Modes............................................................................13

Standby ..........................................................................................13

Standard .........................................................................................13

Manual ...........................................................................................13

Promiscuous...................................................................................14

Configuring the SkyWay-Net as a Base Station............................14

Configuring the SkyWay-Net as a Substation...............................16

Configuring SkyMate Substation(s). .............................................17

Bridging and Routing........................................................................18

IP Routing......................................................................................19

Configuring for Routing Only .......................................................20

Configuring for Bridging Only......................................................23

Configuring ALC/ADFC...................................................................26

Advanced Configuration ..........................................................27

SkyWay Series Multi-Point Operator’s Guide

Dynamic Routing ...............................................................................27

RIP Protocol......................................................................................27

RIP Protocol Configuration ...........................................................27

RIP Port Configuration..................................................................29

Configuring for RIP.......................................................................29

IGMP...................................................................................................30

Network Management..............................................................31

Filters ..................................................................................................31

Bridge Filters .................................................................................31

IP Filters.........................................................................................34

Remote RF Configuration.................................................................36

Using Remote RF Configuration...................................................36

Confirming RF Changes on the Base ............................................37

Confirming RF changes on the SkyWay Subs...............................37

Confirming RF changes on the SkyMate Subs..............................37

Bandwidth Management...................................................................38

Configuring Bandwidth Management ...........................................39

Verifying Bandwidth Management Changes.................................39

SNMP..................................................................................................40

Setting Network Management Security Parameters......................40

SNTP...................................................................................................41

SNTP Configuration ......................................................................42

Changing SNTP Modes .................................................................42

BootP/DHCP Server-Client Protocols .............................................43

Configuring BootP/DHCP on SkyWay-Net..................................43

Configuring BootP and DHCP on SkyMate..................................47

File Transfer Utilities ...............................................................48

TFTP...................................................................................................48

TFTP Server Configuration ...........................................................49

Configuring Skyway as TFTP Server............................................50

Configuring Skyway as TFTP Client.............................................51

Y Modem ............................................................................................51

X Modem ............................................................................................52

Table of Contents

Chapter 3:Monitoring SkyWay Series Network....53

Monitoring Ports ......................................................................53

RF Port................................................................................................53

Connecting the RF Link....................................................................53

Checking the WCOPP-AP Configuration......................................54

Checking the WCOPP-AP Status..................................................54

Checking the WCOPP Sub Port Status..........................................55

Checking the RF Port Status..........................................................55

Monitoring Traffic on your RF Link...............................................56

ALC/ADC ...........................................................................................61

Ethernet ..............................................................................................61

Monitoring the Ethernet Port Status ..............................................62

Monitoring the Ethernet Transceiver Status..................................63

Routing.....................................................................................63

IP Status..............................................................................................63

Checking IP Protocol Status..........................................................63

Checking IP Address Table ...........................................................65

Checking the IP Address Forward Table.......................................65

Checking the RIP Status ...................................................................66

Bridging....................................................................................67

Checking Spanning Tree Status and Bridge Status........................68

Checking Spanning Tree Port Status .............................................68

Checking Transparent Bridging Table Status................................69

Checking Bridge Port Status/Statistics..........................................69

Management.............................................................................70

Systems Tasks - Status & Control....................................................70

Task Status and Control Screens ...................................................70

Task Interdependencies..................................................................70

Checking SNMP Status and Trap History......................................71

SNMP Status..................................................................................71

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Enrutador inalámbrico de otras marcas

Milesight

Milesight UG67 Manual de usuario

Airlogic

Airlogic AirSync Class 1 Manual del propietario

Samsung

Samsung WCH730B Manual de usuario

TELEFONICA

TELEFONICA USB Adapter Manual de usuario

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manual de usuario

Askey

Askey RAC2V1K Manual de usuario

Alloy

Alloy WLF2454AP-S Manual de usuario

TP-Link

TP-Link TL-WR542G Manual de usuario

NETGEAR

NETGEAR WNR2000v4 Manual de usuario

Hama

Hama 53120 Manual de usuario

Intellinet

Intellinet 524582 Manual de usuario

Asus

Asus RT-N10P Manual de usuario

D-Link

D-Link DIR-506L Manual de usuario

Sapido

Sapido GR297n Manual de usuario

Asus

Asus DSL-N55U Manual de usuario

AMTC

AMTC WR7502 Manual de usuario

Compaq

Compaq CP-2W - iPAQ Connection Point Manual de usuario

SMC Networks

SMC Networks WBR14-N2 FICHE Manual de usuario