Chapter 7(UoritJ w,^t-' ..wwx, w,
2.2 GPiB Connector 7.3 2.9 Group 8: Measurement Validity 9.7
2.3 GPIB Switches 7.4 2.10 Group 9: Store/recall 9.8
2.4 Output, to the GP! B7.5
2.5 Serial Poll/ Parallel Poll: GPIB 7.7 Chapter 10: Scaling and Limits Checking
2.6 Parallel Poll 7.10 1Scaling Facilities 1.0.3
2.7 Commands for IEEE 488 Protocol 7.10 2Normalising Sweep Measurements 10.3
3Serial Interface 7.11 3Scaling aMeasurement 10.5
3.1 Data Handshake 7.11 3.1 Checking the Constants Store 10.5
3.2 Echo 7.11 3.2 Entering aScaling Constant 10.6
3,3 Input Command Terminator 3.3 Checking the Function Store 10.8
and Character Frame 7.11 3.4 Clearing aScaling Function 10.10
3.4 Serial Interface Connector 7.11 3.5 Entering aScaling Function 10.11
3.5 Baud Rate Switches 7.11 3.6 Scaling Function Example 10.12
3.6 Output to Serial Interface 7.12 3.7 Applying aScaling Function 10.19
4Dump Output Format* 4The Limits Facility 10.21
for RS423 and GPIB 7.14 4.1 Setting the Limits 10.21
4.1 "Dump” Output 7.14
4.2 "Dump All” Output 7.14 Chapter 11: Learnt Programs
4.3 Floating Point Format lLearnt Program Facilities 11.3
("Dump" and "Dump All” Data) 7.15 l.l Program Storage 11.3
5Remote/Local Control 7.16 1.2 Program Keyswitch 11.3
5.1 Local Lock out 7.17 2Checking the Program Memory Space 11.4
5.2 Combined Use of 3Clearing aLearnt Program 11.5
RS 423 and GPIB Devices 7.18 4Creating aLearnt Program 11.6
6Control Program Examples 7.19 4.1 Entering the Learn Mode 11.6
6.1 Language Used in Program Examples 7. IS 4.2 Learnt Program Example 11.7
6.2 Example: Outputting Readings 5Executing aLearnt Program 11.11
to the GPIB 7.19 6Editing aLearnt Program 11.12
6.3 Example: Plotting Results from the 6.1 Entering the Edit Mode 11.12
History File, Using aController 7.20 6.2 Listing of Example Program 11,13
6.4 Example: Outputting the History File 6,3 Using the Edit Functions 11.14
to the GPIB 7.20 7Copying aLearnt. Program 11.16
7.1 Copy procedure 11.16
Chapter 8: Remote Commands
1Introduction 8.2
2Command Syntax 8.2
3Command Summary 8.3
Command index 8.14
Chapter 9: Error Messages
lIntroduction 9.2
2Error Code Summary
2.1 Group 0: Command Structure 9.3
2.2 Group 1: Learnt Program 9.3
2.3 Group 2: Combined Parameters 9.4
2.4 Group 3: Generator 9.5
2.5 Group 4: Learnt Program;
History File ;Vernier 9.5
2.6 Group 5: Missing Modules 9.6
2.7 Group 6: Illegal Input/Output 9.6
2JWS/1 260/2
