Solarfox 2020 Series Manual de usuario

INSTALLATION INSTRUCTIONS

SOLARFOX® SF-600

- NEW OUTDOOR GENERATION MODEL SERIES 2020 –

 
 
 
 
 
 
 
SOLARFOX® INSTALLATION INSTRUCTIONS SF-600 | Version 1.3 | 11-2019 
 
 
 
 
 
 
SOLEDOS GmbH | SOLARFOX® Page 2 of 26 
 
 
 
Table of contents 
 
General information - Solarfox®SF-600...........................................................................................................4 
Scope of delivery..................................................................................................................................................4 
Preparations for installation and set-up............................................................................................................5 
Additional advice concerning wall characteristics and mounting....................................................................7 
Installation of the display ....................................................................................................................................8 
Installation of the anti-theft panels ..................................................................................................................13 
Installation of the SOLARFOX® Connection Kit ...............................................................................................14 
Activation and Setup..........................................................................................................................................16 
1 Starting the display setup...........................................................................................................................16 
Option A –Configuration via webinterface (automatic): ........................................................................................16 
Option B –Configuration via webinterface (manual):.............................................................................................17 
OPTION C –Configuration via USB keyboard..........................................................................................................17 
2 Configuration of the integrated timer...............................................................................................................18 
3 Limiting the brightness / Energy-saving mode................................................................................................20 
Screen lock................................................................................................................................................................20 
Maintenance.......................................................................................................................................................21 
1 General advice concerning care and maintenance ...................................................................................21 
2 General advice concerning usage ..............................................................................................................21 
3 Ideal picture quality and avoiding ablation of afterimages ......................................................................22 
Ideal picture quality ..................................................................................................................................................22 
Avoiding ablation of afterimages.............................................................................................................................22 
4 Additional information................................................................................................................................22 
Care and cleaning ..............................................................................................................................................22 
Technical information........................................................................................................................................23 
Technical drawings............................................................................................................................................24 
Configuration of SOLARFOX® content .............................................................................................................26 
Contact ...............................................................................................................................................................26 
 
 
 

 
SOLARFOX® INSTALLATION INSTRUCTIONS SF-600 | Version 1.3 | 11-2019 
 
SOLEDOS GmbH | SOLARFOX® Page 3 of 26 
 
Table of illustrations 
 
Illustration 1 –Front and back view SF-600 .................................................................................................................4 
Illustration 2 –Connection pattern SF-600 ...................................................................................................................5 
Illustration 3 –Display registration: setup.solar-fox.com ...........................................................................................6 
Illustration 4 –Wall distance ..........................................................................................................................................7 
Illustration 5 –Wall installation......................................................................................................................................7 
Illustration 6 –Removing the anti-theft panels ............................................................................................................8 
Illustration 7 –Distance for drilling for 46“ and 55“ display .........................................................................................9 
Illustration 8 –Drilling a hole through the wall.............................................................................................................9 
Illustration 9 –Installing the mount on the display.....................................................................................................10 
Illustration 10 –Opening the connection covers.........................................................................................................11 
Illustration 11 –Display-connections .........................................................................................................................12 
Illustration 12 –Installation of the anti-theft panels ..................................................................................................13 
Illustration 13 –Connection scheme............................................................................................................................14 
Illustration 14 –SOLARFOX® Connection Kit..............................................................................................................14 
Illustration 15 –SOLARFOX® Connection Kit..............................................................................................................15 
Illustration 16 –SOLARFOX® Connection Kit..............................................................................................................15 
Illustration 17 –Network settings ...............................................................................................................................17 
Illustration 18 –Samsung remote control ..................................................................................................................18 
Illustration 19 –Wall mount –cross section...............................................................................................................24 
Illustration 20 –Back with wall mount........................................................................................................................24 
Illustration 21 –Technical drawing SF-600 46" ..........................................................................................................25 
Illustration 22 –Technical drawing SF-600 55" ..........................................................................................................25

SOLARFOX® INSTALLATION INSTRUCTIONS SF-600 | Version 1.3 | 11-2019

SOLEDOS GmbH | SOLARFOX® Page 4 of 26

1. General information - Solarfox®SF-600

The SF-600 series is equipped with a robust Samsung monitor and features a modern cooling system with a filter-

less heat exchanger and an integrated heater. The devices comply with the IP-56 protection standard and can be

used in a temperature range of -30° to 50° C. A high-quality anti-reflection glass with vandalism protection and

the very high brightness for use in bright light conditions make the new Solarfox® Outdoor series an eye-catcher.

The flat construction with a depth of only 8.5 cm provides a visually appealing and secure wall mounting. In

outdoor applications, it provides protection against moisture, humidity, heat, dust, vandalism and theft. A daily

individual controllable timer reduces energy consumption.

Illustration 1 –Front and back view SF-600

2. Scope of delivery

1) SAMSUNG IP56 HIGHBRIGHT OUTDOOR DISPLAY

1 piece

2) SAMSUNG infrared remote control, incl. batteries

1 piece

3) Wallmount

1 piece

4) Anti-theft protection (cover and screws)

2 pieces

5) HDMI- fiber optic cable (20 meters) *

1 piece

6) Solarfox® Connection Kit incl. power supply and Solarfox® SC-2000

1 piece

7) Accessories

* In case you need a longer HDMI fiber optic cable, you can either order it as a special item

during your order process or add it as accessories later on. (available: 50m, 100m, 200m)

SOLARFOX® INSTALLATION INSTRUCTIONS SF-600 | Version 1.3 | 11-2019

SOLEDOS GmbH | SOLARFOX® Page 5 of 26

3. Preparations for installation and set-up

You’ll need the following tools for the installation:

1) Impact drill

2) Spirit level and pencil

3) Dowels and screws suitable for the respective wall structure (recommendation: hexagon screws

Ø8mm DIN 571)

4) USB keyboard or notebook or computer for the initial configuration of the display

5) Open-end wrench or ratchet for mounting / dismounting the monitor holder

6) TX15 Torx screwdriver or bit

Please make sure that there is a 230V power supply at the desired place of installation as well as a possibility to

lay the glass fiber HDMI cable (standard scope of supply: 20m) to the inside area. It must be connected to the

SOLARFOX® Connection Kit.

The connection cable between the display and the Solarfox® Connection Kit can be routed through a 16mm empty

pipe. We generally recommend a wired connection via RJ45 / Ethernet. Optionally, the Connection Kit can also be

connected via WiFi (WLAN).

Illustration 2 –Connection pattern SF-600

When choosing the mounting or location, make sure that the respective wall has sufficient load capacity for the

weight of the display and the wall mount (for weight see data sheet). Make sure that the power supply line in the

wall is de-energized!

Installation should be carried out by two people.

SOLARFOX® INSTALLATION INSTRUCTIONS SF-600 | Version 1.3 | 11-2019

SOLEDOS GmbH | SOLARFOX® Page 6 of 26

Please note that the HDMI fiber optic

cable has two different ends. It is

possible to remove the plug attachment

to make it easier to pass the cable

through walls and pipes. We

recommend a pipe diameter of 16 mm.

The illustration on the right shows the

cable without plug attachment (A) and

with attachment (B).

To do so, please access the following website from a browser:

http://setup.solar-fox.com

Illustration 3 –Display registration: setup.solar-fox.com

TIP: We also recommend sending the checklist for IT managers (https://www.solar-fox.com/checklist) to the

network administrator before commissioning. Have them fill it out and return it to you. Then you can quickly

configurate your device.

SOLARFOX® INSTALLATION INSTRUCTIONS SF-600 | Version 1.3 | 11-2019

SOLEDOS GmbH | SOLARFOX® Page 7 of 26

4. Additional advice concerning wall characteristics and mounting

Please remember that the air supply as well as the vents should not be covered during installation. The distance

(A) between the wall and the display has to be at least 40 mm. (refer to Illustration 4 –Wall-distance)

Illustration 4 –Wall distance

The included wall mount ensures a sufficient air supply. The depth of the display incl. wall mount is 127 mm.

(refer to Illustration 4 –Wall-distance)

For wall mounting or installation in a niche, the distance around the display must be 50 mm (A + B). For niche

installations, we therefore recommend the following dimensions for the niche:

SOLARFOX® SF-600 46 ": (LxWxD) 1169 mm x 724 mm x 127 mm

SOLARFOX® SF-600 55 ": (LxWxD) 1310 mm x 780 mm x 127 mm

Illustration 5 –Wall installation

However, the included wall mount can only be used for niche installation if it is possible to access and tighten

the screws on the side and then attach the panel.

DISPLAY

WALL MOUNT

WALL

SOLARFOX® INSTALLATION INSTRUCTIONS SF-600 | Version 1.3 | 11-2019

SOLEDOS GmbH | SOLARFOX® Page 8 of 26

5. Installation of the display

1) First, look for a clean and flat surface. When unpacking, make sure that the surface of

the screen or frame is not scratched and avoid any heavy pressure on the surface. You

should therefore thoroughly check the surface for objects such as screws or dirt.

2) Remove the Samsung monitor from the box and place it on a clean and level surface.

3) Remove the wall mount from the box and first remove the side-mounted anti-theft panels on the left and

right sides of the wall mount.

Illustration 6 –Removing the anti-theft panels

SOLARFOX® INSTALLATION INSTRUCTIONS SF-600 | Version 1.3 | 11-2019

SOLEDOS GmbH | SOLARFOX® Page 9 of 26

4) Use the supplied wall mount and mark the drill holes on the mounting wall (upper and lower holes -

marked in red). Use a spirit level to position the frame. (refer to Illustration 7 –Distance for drilling for 46“

and 55“ display)

SOLARFOX® SF-600 46“ mount SOLARFOX® SF-600 55“ mount

Distance for drilling: Distance for drilling:

995 mm x 560 mm 1186 mm x 560 mm

Illustration 7 –Distance for drilling for 46“ and 55“ display

5) Then drill the necessary holes in the wall with an impact drill and a suitable drill. Make sure that the holes

are at least 10 cm from the outer edge of the wall and inserted vertically into the wall. Screws and dowels

are not included in delivery, these must be selected by the fitter depending on the wall condition. We

recommend 8mm dowels and hexagon screws (recommendation: Ø8mm DIN 571). The drill holes and

dowels must ensure a corresponding tensile load (see respective display weight in section 7).

6) Prepare the cable inlet. The power cord and HDMI fiber optic cable should be routed through the wall before

installing the mount. For this purpose, a hole is to be made within the mounting area and through the

mounting wall. The hole should have a diameter of at least 16 mm for the cables to be pulled through. We

recommend the use of a empty pipe. Pass all cables through the wall and let them hang down on the outside

wall first.

Illustration 8 –Drilling a hole through the wall

SOLARFOX® INSTALLATION INSTRUCTIONS SF-600 | Version 1.3 | 11-2019

SOLEDOS GmbH | SOLARFOX® Page 10 of 26

7) Attach the wall mount to the display. To do so use the inner holes (B) for the 46 "model and the outer (A)

ones for the 55" model. Use the 4 screws already attached to the display. (refer to Illustration 9 –Installing

the mount on the display)

Illustration 9 –Installing the mount on the display

8) Connect the supplied HDMI fiber optic cable to the display.

Be sure to connect the DISPLAY connector to the Samsung Display and the SOURCE connector to

the Solarfox® control computer (SOLARFOX® Connection Kit).

(Please avoid kinking the HDMI cable when connecting or installing it, as this will damage the fiber optic

cable.)

To do this, use a TX15 screwdriver to open the connector cover at the lower left edge of the screen. Plug the

cable into the HDMI IN 1 connector on the monitor. Lead the cable out of the seal and close the cover again.

Make sure all seals are tight. (See illustration 10 - illustrations 1-5 and illustration 11)

Connect the supplied optical fiber HDMI cable to the screen. To do so, open the cover on the lower right side

of the screen. The cable can either be routed to a water-protected socket or the cold-device cable and the

lead can be connected e.g. to WAGO® terminals and protected inside the cover from rain and moisture. Pass

the cable through the gasket and close the cover. (refer to Illustration 10 –and Illustration 11 –Display-

connections)

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Inversor de otras marcas

Fourgroup

Fourgroup Easy Manual de usuario

Velleman

Velleman PI300M Manual de usuario

Sungrow

Sungrow SG350HX-US Manual de usuario

WilTec

WilTec 61897 Manual de usuario

SMA

SMA SUNNY BOY STORAGE 2.5 Manual de usuario

Simplicity

Simplicity LANDLORD 316 Manual de usuario

Santak

Santak SMAX 3000 Manual de usuario

ATON

ATON RA.Store-3 Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manual de usuario

Tektronix

Tektronix CFG250 Manual de usuario

Champion

Champion 200989 Manual de usuario

Vanner

Vanner 20-500 Series Manual de usuario

GE GEP Manual de usuario

Astrel Group

Astrel Group Power Reducer Guía rápida

MULTIQUIP

MULTIQUIP GDP-5H Guía

GoWISE

GoWISE PS1007 Manual de usuario

Promate

Promate PM13500D ES Manual de usuario

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manual de usuario